Trimmer

Upper handle clamp for tillers and trimmers. Secures handlebar assembly in place. Replace if cracked, loose, or worn to restore proper grip control.

Breather housing assembly for line trimmers and tillers. Replaces cracked, broken, or damaged housings. Installs on engine to maintain proper ventilation.

Fix grinding noises or drive issues in your line trimmer with this pinion gear assembly. Common repair for worn gears causing poor performance.

This genuine MTD carburetor assembly can be used as a replacement part for a string trimmer, a tiller, a leaf blower, or a leaf vacuum. The carburetor assembly contains a replacement carburetor and its components that combine to attach the carburetor within the small engine of the appliance. The function of the carburetor is to create a blend of the external fuel and air and use that blend to ignite the spark plugs and start up the engine.A carburetor that suffers damage that affects the appliance's ability to operate smoothly should be replaced. Symptoms of a failing carburetor include black or white smoke pouring from the exhaust, a misfiring or stalled engine, or unusually rough riding with poor traction. If this is the case, a replacement carburetor assembly such as this OEM part should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This carburetor assembly is compatible with the following brands: MTD, Ryobi, and Yard Man.

Retainer ring for gas line trimmers. Secures internal components in place. Replace if cracked, broken, or missing to restore proper assembly.

Compression spring for line trimmers. Installs in the trimmer head assembly to maintain tension. Replace if worn, broken, or missing for proper operation.

Engine won't start or runs rough? This reed valve assembly controls air-fuel mixture in 2-cycle engines. Common fix for power equipment starting issues.

The carburetor replacement part here can work with several types of gas-powered machines for use in lawn care and gardening. The carburetor is one of the most important parts of an engine. It is where the air and fuel are mixed before the fuel goes into the engine. The correct ratio helps to ensure that the engine starts easily and functions properly. If the engine is difficult to start, if there are gas leaks, or the engine has trouble continuing to run after being started, the carburetor could be at fault. Over time, parts of the carburetor could fail. When there are issues with the carb, it should be replaced as soon as possible. This genuine OEM replacement carburetor is sold individually. It can replace the carburetors in certain models of edgers, trimmers, and tillers. Compatible brands include MTD, Bolens, Yard-Man, Yard Machines, Ryobi, Cub Cadet, Troy-Bilt, and Craftsman. Owners must ensure they are choosing the correct carb for their make and model.

Engine won't start or runs rough? This spark plug provides reliable ignition for small engines in trimmers, blowers, and tillers. Easy DIY replacement.

This genuine Husqvarna muffler for string trimmers and edgers is a necessary component for reducing noise from the equipment. While these machines might work without mufflers, they would be much louder. The muffler also prevents sparks from coming through and starting fires. This is particularly important when working with grass, leaves, and other dry debris.If the muffler is clogged, cracked, or broken, the engine on the equipment might not perform as it should. Clogs can occur over time due to the use and buildup of debris. Cracks and breakage are a normal part of wear and tear and would be easy to find during routine maintenance. Inspect for rust, cracks, breaks, and damage.Removal and replacement is a simple process using a screwdriver to remove the engine cover. Set the cover aside. Next, remove the bolts holding the old muffler in place. Remove the old muffler and discard. Wipe down the area while the muffler is off the equipment. This will prevent debris from interfering with the installation. Install the new muffler with the bolts included. Tighten the bolts but do not overtighten. Reinstall the engine cover and tighten the bolts. This muffler is compatible with Husqvarna trimmers. It is sold individually and comes with bolts.

This is a fuel tank assembly that is made to be used with several models of leaf blowers from various manufacturers. It works with handheld blowers and includes a full assembly with the fuel tank, fuel cap, and fuel lines. This component is part of the fuel system and should be replaced immediately if it is damaged or cracked as it can be dangerous to use it in that state. When replacing the fuel tank assembly, make sure the leaf blower is turned off. Disconnect the spark plug wire and drain the gas from the tank before moving forward with this project. A screwdriver is needed to make the repair and work gloves will also be useful. Take out the screws that hold the fuel tank and then remove the fuel lines. The new replacement fuel tank can be installed before the fuel lines are added and the cap is placed on top.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The fuel tank assembly is sold as an individual item. It is made to be compatible with several leaf blowers manufactured by Yard-Man, Troy-Bilt, Craftsman, MTD, and Cub Cadet.

Replace a cracked or leaking fuel tank causing your leaf blower to lose power or leak gas. Direct fit replacement part for handheld blowers.

The cam is a part used in trimmers to counterbalance the blades. This is a small, 1 x 1 inch, circular part with a small cutout in it. When a trimmer is used on a regular basis, it will cause wear and tear to the cams. Over time, these parts can fail and will need to be replaced to ensure the trimmer is working and cutting properly. This is an OEM part sourced directly from the manufacturer. It is sold individually.The cams in a trimmer are mounted on one side of a drive member with the axis of the two cams lying on the opposite sides of the axis of the drive member. The axis of one cam should be spaced further away from the axis of the other cam. This cam engages a cutting blade of lower mass and then the other blade in order to counterbalance the inertial forces created by the reciprocating cutting blades.There are several manufacturers of this part. These include Craftsman, ClickLink, Trimmer Plus, MTD, and Cub Cadet. This replacement part is compatible with hedge trimmers and string trimmers. Remember to always wear protective gear, such as work gloves and eye protection, when operating this type of machinery.

This blade guard is a genuine MTD part, sold individually. This blade guard can be used as a replacement part for a string trimmer. This blade guard protects the blades of the string trimmer so that they are not damaged upon impact with the surface on which the string trimmer is being operated.The blade guard might have to be replaced at some point within the standard lifespan of the appliance in the event that the component suffers damage. This could occur if the blade guard is chipped, torn, punctured, or sufficiently eroded to the point that the blades are directly exposed to potential impact with hard surfaces. The blade guard needs to be removed and replaced with this genuine OEM replacement part if the blades are exposed or are at risk of exposure over general long-term usage.This is an OEM part sourced directly from the manufacturer. It is sold individually. This blade guard is compatible with the following brands: MTD, Craftsman, and Cub Cadet.