Trimmer

This genuine Husqvarna muffler for string trimmers and edgers is a necessary component for reducing noise from the equipment. While these machines might work without mufflers, they would be much louder. The muffler also prevents sparks from coming through and starting fires. This is particularly important when working with grass, leaves, and other dry debris.If the muffler is clogged, cracked, or broken, the engine on the equipment might not perform as it should. Clogs can occur over time due to the use and buildup of debris. Cracks and breakage are a normal part of wear and tear and would be easy to find during routine maintenance. Inspect for rust, cracks, breaks, and damage.Removal and replacement is a simple process using a screwdriver to remove the engine cover. Set the cover aside. Next, remove the bolts holding the old muffler in place. Remove the old muffler and discard. Wipe down the area while the muffler is off the equipment. This will prevent debris from interfering with the installation. Install the new muffler with the bolts included. Tighten the bolts but do not overtighten. Reinstall the engine cover and tighten the bolts. This muffler is compatible with Husqvarna trimmers. It is sold individually and comes with bolts.

The cam is a part used in trimmers to counterbalance the blades. This is a small, 1 x 1 inch, circular part with a small cutout in it. When a trimmer is used on a regular basis, it will cause wear and tear to the cams. Over time, these parts can fail and will need to be replaced to ensure the trimmer is working and cutting properly. This is an OEM part sourced directly from the manufacturer. It is sold individually.The cams in a trimmer are mounted on one side of a drive member with the axis of the two cams lying on the opposite sides of the axis of the drive member. The axis of one cam should be spaced further away from the axis of the other cam. This cam engages a cutting blade of lower mass and then the other blade in order to counterbalance the inertial forces created by the reciprocating cutting blades.There are several manufacturers of this part. These include Craftsman, ClickLink, Trimmer Plus, MTD, and Cub Cadet. This replacement part is compatible with hedge trimmers and string trimmers. Remember to always wear protective gear, such as work gloves and eye protection, when operating this type of machinery.

Wheel assembly with tire for landscape maintenance equipment. Replaces worn, cracked, or damaged wheels that affect maneuverability and stability.

Fix a starter that won't retract or recoil properly with this rewind spring. Restores tension for smooth pull-cord operation. 15-30 minute repair.

Replacement spring for grass line trimmers. Installs in the trimmer head assembly. Order a new spring if your original is stretched, broken, or missing.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. This type of part is very common in different types of appliances. Screws hold different parts together.A new screw might be needed if the user notices that different parts are loose or missing. It is possible for screws to become stripped over time and will need to be replaced. The repair for this screw should be fairly simple and will require a screwdriver and perhaps pliers if the previous screw is stuck in place. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

Assembly screw for grass line trimmers, leaf blowers, and pruners. Secures internal components and housing panels. Replace if stripped, missing, or damaged.

Small metal washer that secures components in edgers and trimmers. Replace if worn, damaged, or missing to properly fasten screws and nuts in your equipment.

Replacement mounting screw for chainsaws and outdoor power equipment. Secures components and covers. Replace if stripped, missing, or damaged during repair.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer. The purpose of the retainer in a string trimmer is to affix the fuel tank to the fuel line so that the fuel for the appliance can be directed through the proper passageway and be delivered into the tank.The retainer in a string trimmer might need to be replaced if it is damaged to the point that it loosens from its spot or cannot maintain its placement. If this occurs, the fuel might not be able to be effectively delivered to the fuel tank, in which case the appliance might not function as usual. If the retainer is damaged or compromised, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Weed Eater, Craftsman, and Poulan.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer or a leaf blower. The purpose of the retainer in a string trimmer or a leaf blower is to secure the recoil starter pulley while the appliance is in use. The retainer in a string trimmer or a leaf blower might have to be replaced if it can no longer secure the recoil starter pulley. If damaged, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.

Fix trimmer that won't accelerate, makes grinding noises, or emits burning smell. Clutch assembly connects engine to cutting head. Moderate DIY repair.

Crankshaft outer bearing creates a flexible joint for moving components. Replace when you notice excessive vibration or noise during operation. Verify fit with your equipment's model number before ordering.