Troy-Bilt Edger Parts

Extension spring for snow blower idler pulley assemblies. Mounts to housing to maintain proper tension in belt drive system. Replace if stretched, broken, or missing.

This is a wheeled string trimmer belt compatible with many brands. The belt's purpose is to drive the unit, transferring power from the engine to the cutting head. Over time, belts are subject to wear and tear, heat, and humidity. This can make the belt brittle and eventually it will snap. In other instances, belts will stretch after being used for long periods and need to be replaced. Replacing the belt is a simple process. Start with the engine off and the spark plug disconnected. Remove the screw holding the chassis cover in place and then the screws holding the debris shield. With the debris shield out of the way, the belt should be clearly visible. Remove the engine pulley, but make sure to note the pulley's position for replacement. Install the new belt and reassemble the trimmer. This part is a genuine OEM part sourced directly from the manufacturer and sold individually. This belt is compatible with Craftsman, Bolens, Remington, Ryobi, and Yard-Man brands.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

Stores fuel for gas trimmers, edgers, and blowers. Replace if cracked, leaking, or damaged. Durable plastic construction installs in fuel system.

This cutting wheel assembly sits inside the chipper shredder housing to break down yard debris into smaller pieces. Replace when blades become dull, chipped, or the wheel wobbles excessively during operation.

Secures wheels and attachments to axles on lawn mowers and tractors. Replace if bent, rusted, broken, or lost to restore safe equipment operation.

Replacement carburetor assembly for gas line trimmers and handheld equipment. Includes primer bulb and fuel lines. Replace when old carburetor is damaged.

Foam air filter for tillers and cultivators. Replace when dirty or damaged to maintain proper fuel-air balance for engine performance. Verify fit.

Throttle control cable for edgers and powered lawn equipment. Replaces worn, frayed, or broken cables that prevent proper engine speed adjustment.

Replacement edger blade for cutting grass and weeds along concrete and landscape edges. Replace when blade becomes dull, damaged, or worn from ground contact.

Protective belt guard cover for edgers and lawn equipment. Shields belt and drive components from debris. Replace if cracked, broken, or missing.

The tri-cut blade works to replace edger blades to ensure they are sharp and capable of cutting through the grass and turf properly. The blade is made from metal and can provide users with clean edging around the edges of their lawn and around flower beds. Regularly examine the edger blade regularly to ensure that it is not bent, broken, or otherwise damaged. If your current edger blade is no longer sharp and cannot be sharpened, it is time for a replacement. Without a sharp blade for the edger, it will be impossible to take care of the lawn properly. To replace the blade in your edger, the only tool required is a wrench. Replacing the blade is easy, and it should not take more than 15 minutes. This OEM part is sold individually, and it works with edgers from a range of brands, including Craftsman, Yard Machines, MTD, Troy-Bilt, Bolens, and Yard-Man.

This carburetor O-ring creates an airtight seal between carburetor components to prevent fuel and air leaks in small engines. It maintains proper fuel mixture and prevents contamination that could affect engine performance. Replace it when you notice fuel leaks around the carburetor, poor engine performance, or difficulty starting your equipment.

This air filter is the replacement part for specific tillers, edgers, and cultivators. Its main function is to prevent grime and debris from reaching the engine and carburetor. With time and use, air filters get dirty and may become clogged or damaged. Replacing the air filter regularly encourages adequate air flow to the engine, which reduces engine wear, and increases the longevity of the machine. Replacement is simple and can be done in a matter of minutes. With a screwdriver, remove the old air filter, and install this new, clean filter. Be sure to check the owners manual for proper installation techniques, as it varies by brand and machine. This air filter, made of foam, is a genuine OEM part. It is sold as an individual unit. It is compatible with tillers, edgers and cultivators made by the Ryobi, Troy-Bilt, and Yardman brands. All engines need regular care and maintenance to perform optimally. To ensure the Tiller, Edger, or Cultivator model starts easily, maintains power, functions properly, and has a long, hard-working life, the air filter should be replaced routinely.

This is a metal extension spring used on a lawn tractor's brake rod assembly. It provides the tension needed to return the brake rod to its resting position after the brake pedal is released. Replace this spring if the brake pedal feels loose, does not return to position on its own, or the spring is visibly stretched, corroded, or broken.

Hex flange bearing supports rotating shafts in riding mowers and tractors. Replace when you notice grinding noise or rough rotation. Verify fit with your model.