Troy-Bilt Parts

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

The front-drive wheels are attached to the axle with a ring gear and a left-hand smaller gear inside. The wheels are responsible for keeping the mower deck from touching the ground and keeping the blade at a good height for safe operation. They also provide easy maneuvering of the lawnmower. The black and white finish offers a clean, classic look. Although wheels don’t typically wear down enough to need to be replaced, they can become damaged over time. If the wheels are broken or missing, this replacement from the manufacturer can get a lawn mower rolling again in no time at all. Although it’s not required, it is suggested to replace wheels in pairs to ensure even wear over the lifespan of the mower. The front-drive wheel is compatible with several MTD and Troy-Bilt lawnmowers that require front drive wheels. This wheel is typically for self-propelled models. This item is sold as a single unit and additional wheels will have tobe purchased separately. These sturdy plastic wheels are direct from the manufacturer and made to their exact standards to guarantee proper performance and fit with every compatible model.

Trimmer head reel for gas line trimmers. Spools and houses cutting line. Replace if cracked, broken, or worn. Slides into housing for easy installation.

Foam air filter prevents debris from entering your engine. Replace if dirty, clogged, or causing black smoke and high fuel consumption. Verify fit.

Throttle cable assembly for gas line trimmers. Connects carburetor to control lever. Replace if cable is stretched, frayed, kinked, or broken from use.

This is an insulator assembly includes the insulator, seals, and hardware. It is designed to create the right spacing between the cylinder and carburetor on many blowers and trimmers made by various manufacturers. The insulator assembly also keeps heat from moving between the other components. Over time, the insulator assembly can become damaged or crack. When this occurs, air can reach the engine and create a condition where the engine can't perform at its best. If this happens, the insulator assembly will need to be replaced. Take off the air filter, drain the fuel, and remove the intake assembly. The insulator can be taken off of the engine before the replacement is added. Use mounting screws to fit the insulator to the other components. Reassemble the other parts to use the tool.This insulator assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. This component is made to be used in leaf blowers, tillers, and string trimmers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

Secures the mower blade to the spindle shaft on walk-behind mowers. Includes adapter, bolt, and bell support. Replace when worn or damaged.

Inner spool reel for line trimmers. Holds and winds trimmer string inside the trimmer head. Replace if cracked, broken, or worn from use.

This part is an idler pulley. The idler pulley applies tension to and guides the engine drive belt. A wrench set is needed to perform any repair involving the idler pulley part.The idler pulley can become worn over time with normal use. Wear to the pulley can cause the belt to slip. Signs that the idler pulley needs to be replaced include squealing noises coming from the equipment, the engine stalling, or overheating. The idler pulley is an essential component and it is important to replace this part if it becomes worn, broken, or damaged in any way.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This idler pulley is compatible with lawn tractors and snowblowers manufactured by MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

The ignition switch is the part of lawn and garden equipment that features an ignition to turn on and off with a switch. These are common on lawn tractors, as well as some lawn mowers, wood chippers, tillers, and log splitters. While these switches tend to be robust, they may eventually wear out. Some might have a mechanical failure after being used for years. Others might have electrical issues. Regardless of the reason for the failure, they will need to be replaced to continue using the machine. This is a genuine OEM part that is sold individually. It is a complete kit, which will include not only the switch, but also a washer and nut to secure the switch into the housing, and two ignition keys. The ignition switch can work with lawn tractors from brands such as MTD, Ryobi, Troy-Bilt, Bolens, Yard Machines, and Craftsman.

Black ignition key for lawn tractors and riding mowers. Replace lost, broken, or worn ignition keys. Direct fit for starting your mower's engine.

Snowblower won't move forward or reverse? This friction wheel assembly transfers power from the engine to the drive system. Common repair for loss of traction.

This is a spiral roll pin measuring 0.156 inches in diameter and 1 inch in length, used to secure rotating components on chipper shredders and lawn vacuums. It holds parts in alignment on shafts and prevents slippage during operation. Replace this pin if it is sheared, bent, or missing, which can cause loose or non-functioning attachments.