Troy-Bilt Tiller Parts

This carburetor assembly can be used as a replacement part for the small engine of a string trimmer, a chainsaw, or an edger. The carburetor assembly contains a replacement carburetor and the components required to facilitate the replacement and installation of the carburetor. The purpose of the carburetor is to create a mixture of the fuel and air that the engine takes in and channel it through the network of valves to the spark plugs, which ignite and power up the engine.A carburetor might have to be replaced if it is damaged to the point of exhibiting the following symptoms, among others: black smoke pluming from the exhaust, reduced fuel economy, misfires and false starts of the engine, and oil leakages stemming directly from the carburetor. If this is the case, this carburetor assembly should be ordered as a replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This carburetor assembly is compatible with the following brands: MTD, Troy-Bilt, Ryobi, and Yard Man.

The gearbox assembly is found in tillers and is where the gears are housed that supply the drive and torque for the unit. The gearbox assembly is designed to provide protection for the gears and the other internal components, which are responsible for transferring energy to increase torque and control speed. Although it is made of durable materials, it may become worn or damaged over time and require a replacement. This genuine OEM gearbox assembly is produced to exact manufacturer standards and made to be used in compatible machines from Yard-Man, Ryobi, Yard Machines, Bolens, Cub Cadet, and MTD. The gearbox assembly is sold as an individual assembly and comes ready to install with the four screws required for installation. Be sure to wear gloves and disconnect the power from the tiller before performing any repairs. Allow the unit to cool completely and follow the diagram to ensure that the replacement part fits exactly. This assembly will require a screwdriver and wrench set to replace.

This recoil starter assembly includes the pulley and associated components needed to manually start a small engine on a tiller or other outdoor power equipment. It engages the engine's crankshaft when the starter rope is pulled, allowing the engine to turn over and start. Replace this assembly if the pull cord won't retract, feels loose, or the engine won't turn over when the rope is pulled.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This is a genuine replacement oil plug that is found in certain trimmers, edgers, and blowers designed for outdoor use. The oil plug is used to seal and fill the oil in the engine. This part is a high-quality plastic piece that features threads for screwing it into place and an O-ring to create a strong seal to prevent leaks and ensure optimal engine pressure. The oil cap may become stripped or damaged over time, or the O-ring could become faulty. In either case, replacing the entire cap/plug is the easiest solution.This genuine OEM replacement oil plug is compatible with machines from Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet. The plug is sold individually and comes with the O-ring. There are no other parts or hardware included. No tools are required to replace this plug. Simply unscrew the old one and screw the new one into place once the O-ring has been put on the new plug. Wear gloves whenever engine work is being performed to ensure hand protection. The oil should be checked regularly in all machines, which is a good time to check the cap to ensure it isn't damaged or in need of replacement.

Fastening screw for outdoor power equipment. Secures components and reduces vibration. Replace if stripped, corroded, or missing from your machine.

Tiller wheels won't turn or engage properly? This worm gear connects to the drive shaft to power wheel rotation. Fixes transmission drive issues.

Lawn tractor won't start or shuts off unexpectedly? This snap switch controls electrical circuits in your mower. Direct OEM replacement part.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

Flange bearing for lawn tractors and walk-behind mowers. Replace when you notice excessive noise, wobbling, or difficulty with blade rotation. Verify fit with your model number before ordering.

Flange bearing for lawn tractors and snow blowers. Replace if you notice excessive noise, vibration, or rough wheel rotation. Verify fit with your model.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

This is a wheel drive clutch assembly for a tiller. It engages and disengages power from the engine to the wheels, allowing the operator to control forward movement. Replace this clutch if the tiller wheels won't engage, slip during operation, or the tiller moves on its own when the drive control is released.