Parts for Electrolux EFLS627UTT1: Tubb / Motor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement spring restores the correct tension in the affected mechanism on your appliance, helping parts return smoothly and stay aligned. A fatigued or broken spring can cause loose action, noise, or improper engagement—this fixes it fast. What it does

• Provides return tension to the related mechanism so parts move and reset correctly
• Helps maintain alignment and reduces looseness or rattle during operation
• Supports smooth engagement/disengagement of linked components
• Common symptoms: weak/loose action, parts not returning to position, squeaking/rattling, visible break or deformation

• 1 spring

• Disconnect power; for gas appliances, shut off gas. For washers, also turn off water supply.
• Support the component under spring tension before removal to prevent sudden release.
• Note or photograph original routing and anchor points to match orientation on reassembly.
• Inspect related brackets/clips; replace any that are bent, worn, or corroded.

The Door Boot Seal is an OEM part for Frigidaire washing machines. It forms a watertight seal between the washer's door and drum, preventing leaks during the wash and spin cycles. This flexible gasket ensures that water stays inside the drum, contributing to the washer's efficiency and reliability.

Common causes of a bad door boot seal include mold and mildew buildup, physical damage from sharp objects or overloading, and general wear and tear from regular use. A compromised seal can lead to water leaks and reduced washing performance.

Symptoms of a bad door boot seal include:

• Water leaking from the front of the washer
• Visible tears, cracks, or mold on the seal
• Unpleasant odors coming from the washer drum
• The washer door not closing or sealing properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This suspension spring supports the washer tub and helps stabilize the drum during spin cycles to reduce vibration and noise. Replaces a worn or broken tub spring to restore smoother operation. What it does

• Holds and stabilizes the inner tub assembly to limit excessive movement during spins
• Helps reduce vibration and rattling that can occur from a loose or broken spring
• Prevents tub misalignment that can cause rubbing or noise
• Works with the washer's suspension system to maintain proper spin balance

• One suspension (tub) spring as shown

• Disconnect power and water supply before starting any repairs
• Springs are under tension; use caution and proper tools to remove/install
• Inspect other suspension components (shocks/rods, mounts) and replace if worn

The Spring is an OEM part for Frigidaire washing machines. It is a component that assists the movement of the inner basket or tub during the wash cycle. The spring plays a crucial role in dampening vibrations and absorbing shocks to provide stability, preventing excessive noise and movement.

Causes of a spring failure can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the spring, or damage due to impact or mishandling.

Symptoms of a bad Spring include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or walking during operation
• Leaks due to increased stress on the tub and other components

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This hex washer head screw secures appliance components and hardware, helping keep panels and assemblies fastened for safe, reliable operation. Use it to replace missing or damaged screws that allow parts to shift or rattle. What it does:

• Fastens panels, brackets, and component assemblies using a hex washer head for broad bearing surface
• Restores secure fit where stripped, missing, or damaged screws cause loose parts or vibration
• Maintains proper alignment and prevents movement that can lead to noise or additional wear
• Matches the OEM thread and length for a correct fit when replacing the specific factory screw

• Disconnect power to the appliance before beginning any repair
• Use the correct hex driver/socket to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid overtightening
• Repair or replace the threaded insert or mounting hardware before installing

This drum assembly is the rotating tub that holds and tumbles clothes inside a dryer, restoring proper load movement and preventing cloth damage from bent or worn drums. Replace a damaged drum to return smooth, even drying performance. What it does:

• Provides the rotating drum surface that carries and tumbles clothing during the dry cycle
• Supports drum rollers/bearings and works with the belt and motor to turn loads
• Common symptoms: visible dents, cracks or sharp edges on the drum, loud scraping or grinding noises, fabric snagging or excessive wear
• Replacing a damaged drum reduces rubbing and prevents further wear to belts and rollers

• Disconnect power to the dryer before beginning any service
• Access usually requires removing the dryer front or rear panel; follow the OEM service manual for safe disassembly
• Inspect and replace worn rollers, bearings, seals or the belt as needed while drum is accessible
• After installation, test with a short cycle to ensure smooth rotation and that no unusual noises remain

The Vane is an OEM part for Frigidaire washing machines. This part is responsible for the movement and circulation of clothes inside the washer drum during the washing cycle. 

Causes of a bad vane can include wear and tear from regular use, physical damage from foreign objects in the drum, or degradation of the material over time.

Symptoms of a bad vane include:

• Clothes tangling or not moving properly during the wash cycle
• Increased noise during operation
• Visible damage or wear on the vane
• Poor cleaning results

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Motor is an OEM part for Frigidaire washing machines. As an integral internal part, the motor uses its rotating power to agitate clothes and spin water out during the wash and spin cycles. 

Symptoms of a bad motor include: 

• The washer fails to start or complete cycles
• Loud grinding noises emanating from inside the washer cabinet 
• Vibration issues causing the washer to shake excessively
• The drum refusing to spin 

Causes of motor failure can be normal wear and tear over time, impact or water damage corroding motor windings, or burned-out motor starter components like capacitors or brushes.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This is a motor-mount screw used to secure the appliance motor housing. It's a direct-fit fastener that restores proper motor attachment to reduce movement and rattling caused by loose or missing hardware. What it does:

• Secures the motor to its mounting bracket or housing
• Prevents motor shifting that can cause vibration, noise, or misalignment
• Restores proper mechanical connection after strip-out or lost hardware
• Helps maintain safe operation by keeping motor fastened

• Disconnect power before servicing the appliance.
• Use the correct screwdriver or socket to avoid stripping the head.
• Thread carefully and tighten to snug; avoid over-tightening which can strip threads.
• If mounting holes or threads are damaged, repair or replace the affected components before reinstalling.

This O-Ring creates a tight, leak-resistant seal between appliance components. Replacing a worn or flattened ring restores proper sealing, helps stop drips at the joint, and protects nearby parts from moisture and mineral residue.

• Provides a compression seal between fittings, housings, or tubes
• Helps prevent water leaks and loss of pressure at the connection
• Common signs of failure: moisture or residue around the joint, visible cracks/flattening, leaks after reassembly
• Regular wear, heat, chemicals, or age can harden or deform the ring

• Disconnect power and shut off the water supply before servicing
• Relieve line pressure and place a towel to catch residual water
• Clean mating surfaces; lightly lubricate the new O-ring with food-grade silicone grease
• Seat evenly without twisting or pinching; reassemble and check for leaks

This shell is the outer housing piece that covers and protects the appliance's internal components while restoring the unit's appearance. It provides a finished look and helps keep wiring and internal parts shielded from debris. What it does:

• Covers internal components to protect them from dust, moisture and accidental contact
• Restores the appliance's exterior appearance after damage or repair
• Helps route and retain wiring or smaller internal parts where designed to do so
• Contributes to noise reduction and airflow pathways as intended by the manufacturer

• One outer shell/housing

• Recommended for installation by a confident DIYer familiar with appliance disassembly
• Disconnect power and water before starting work to avoid shock or flooding
• Handle carefully to avoid scratching the finish; use proper fasteners and torque to OEM specs
• Inspect surrounding clips, screws and seals and replace if damaged to ensure a secure fit

The Belt is an OEM component specifically designed for Frigidaire front-loading washers. It plays a vital role in powering the washer drum during spin cycles.

The belt connects the motor to the drum allowing for faster, more efficient removal of water after the wash cycle. Even with heavy loads, the belt provides the necessary rotational force. 

Symptoms of a bad belt include:

• The washer fails to complete full spin cycles
• Unusual vibrations and noises during the operation  
• Damaged or shredded remains of the old belt 

Causes of belt failure can include normal wear and tear over many machine hours and cycles. Damage from foreign objects inside the drum is also possible.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washer models. Replacement restores full cycle functionality.

The Pulley Assembly is an OEM component specifically designed for Frigidaire front-loading washing machines. This assembly contains the plastic pulley wheel that works in conjunction with the belt drive system to power the agitator and basket movements. 

Symptoms of a faulty pulley include:

• Abnormal noises or squealing emitting from the area  
• Slipping or intermittent engagement of wash and spin functions
• Visible cracks or fractures in the pulley housing or wheel

Causes can be from wear of the drive belt slipping off track or tension malfunctions over extended use cycles. Repeated mechanical stress from propelling the heavy tub may also lead to structural fatigue cracks.

This OEM Frigidaire part is compatible with Electrolux, Gibson, Kelvinator, and Kenmore front-loading machines.

The Bolt is an OEM replacement part for Frigidaire washing machines. Internally installed, these fasteners securely hold internal components like the tub, transmission, and agitator in the proper position. 

Causes of bolt failures can include wear and corrosion from repeated vibrations during spin cycles compounding over many years of use. 

Symptoms of bad bolts include: 

• Loose, wobbly, or misaligned internal components    
• Grinding noises or strange vibrations occurring  
• Leaks developing from compromised tub seals

Compatible brands include Frigidaire, Electrolux, KitchenAid, Jenn-Air, and select Kenmore models for lasting reliability.

The Shock Absorber is an OEM part for Whirlpool brand washing machines. It plays a vital role in reducing vibrations and absorbing shocks during the wash cycle, providing stability and minimizing excessive movement. 

Symptoms of a bad shock absorber include:

• Excessive shaking or vibrating during the wash cycle 
• Loud banging noises
• The washer moving or walking during the operation
• Leaks due to increased stress on the tub and other components

Causes of a bad shock absorber can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the absorbers, or damage due to impact or mishandling. 

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Note: This is one shock absorber, order quantity needed.

The Shock Absorber is an OEM part for Frigidaire washing machines. The shock absorbers play a vital role in reducing vibrations during the spin cycle and absorbing mechanical shocks that occur with imbalanced or off-center loads. Their durable design effectively isolates the external structure from damaging reverberations.

Causes may involve age-related wear that diminishes shock absorbing qualities over thousands of machine cycles. Impact damage or broken mounts could also necessitate replacement. Installing this kit restores a quiet and stable washing performance to the appliance.

Symptoms of a bad shock absorber include:

• Excessive shaking or vibrating during operation, especially spin cycles
• Loud banging or knocking noises from the washer
• The washer moving or walking on the floor during use
• Leaks from external tub connections

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Shock Absorber Mounting Pin is an OEM part for Frigidaire washing machines. It is a part that secures the shock absorber in place, ensuring proper absorption of vibrations and shocks during the washing cycle.

Causes of a bad shock absorber mounting pin can include loosening over time due to constant movement and vibrations, accidental damage or loss during repair or maintenance, or general wear and tear.

Symptoms of a bad or missing shock absorber mounting pin include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or rattling noises
• The washer moving or "walking" across the floor
• Premature wear or damage to the shock absorbers and other components

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This mounting bracket secures its associated component inside your appliance, keeping it properly positioned during operation. Replacing a bent or broken bracket helps stop rattling or vibration and restores stable, reliable performance.

• Provides a rigid mounting point to the appliance frame or assembly
• Maintains correct position and alignment of the attached component
• Helps reduce vibration and operational noise
• Common failure signs: cracks, bending, stripped holes, or the part no longer stays secured

• Disconnect power before servicing; if working on a washer, also shut off water supply
• Note the original orientation and hardware locations; transfer any clips or grommets from the old bracket
• Reinstall using existing screws and tighten evenly—do not overtighten

This cable tie secures wiring and small hoses to appliance frames and harnesses, keeping components organized and reducing wear from rubbing or vibration. It helps maintain safe routing so wires stay clear of moving or hot parts. What it does:

• Fastens wire bundles, harnesses, and small hoses to prevent movement
• Keeps wiring routed away from sharp edges and heat sources
• Reduces noise and wear caused by loose or vibrating wires
• Helps prevent chafing that can lead to insulation damage or intermittent connections

• Disconnect power before servicing electrical components
• Position ties to secure harnesses without over-tightening; trim excess tail
• Keep ties away from high-heat surfaces and moving parts
• Replace any damaged or brittle ties rather than reusing

The Pump Assembly is an OEM part for Frigidaire washing machines. This assembly includes both the pump and its mounting bracket, working together to remove water from the washer tub. During drain cycles, the pump works vigorously to expel soiled water through the drain hose and out of the machine.

Causes of a bad pump assembly can include residue buildup clogging the pump mechanism over time, worn impeller blades with reduced efficiency, or damage to internal components that restrict water flow.

Symptoms of a failed pump assembly involve issues with drainage, including:

• Water not fully exiting the machine after drain cycles
• Extended drain times with gradual emptying
• Leaks or flooding observed around the rear of the machine

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Filter is an OEM part for Frigidaire washing machines. This part traps debris, lint, and small objects that get washed out from clothes during the wash cycle. By filtering out these materials, the pump filter protects the drain pump and hose from clogs and potential damage, ensuring that the washing machine operates efficiently and the drainage system remains clear.

Causes of a bad washer pump filter can range from accumulation of lint and debris, which can clog the filter, to damage or wear that compromises its ability to filter properly.  

Symptoms of a bad filter include:

• The washing machine not draining properly or leaving clothes excessively wet
• Unusual noises from the pump area, indicating struggling or blockage
• Frequent pauses or stops during the drain cycle

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This clamp secures a hose to its fitting, maintaining a tight, leak-resistant seal at the connection. Replace a fatigued or missing clamp to help prevent drips and stop hoses from working loose under vibration.

• Holds a hose firmly on a pump, tub, dispenser, or valve outlet
• Maintains clamping force to help minimize leaks at the joint
• Helps keep hoses from slipping off during operation
• Common signs: water at a hose joint, loose/slipping hose, damaged or corroded clamp

• Disconnect power and shut off water supply before servicing
• Place a towel or pan to catch residual water at the connection
• Note hose position; remove the old clamp, seat hose fully on the fitting, position the new clamp over the bead, and secure
• After reassembly, run a short cycle and check for leaks

This air chamber directs and channels cold air inside the appliance to help maintain even temperatures. Replacing a damaged or cracked air chamber restores proper airflow for more consistent cooling and performance. What it does:

• Channels conditioned air from the evaporator into the cabinet to help even temperature distribution
• Prevents air leaks and redirects airflow to the correct compartments
• Can cause uneven cooling, warm spots, or frost buildup when cracked or broken
• Works with fans and ducts to maintain proper airflow balance

• One air chamber assembly

• Disconnect power to the appliance before beginning service
• Remove interior panels or shelves as needed to access the chamber; handle plastic tabs and clips carefully to avoid breakage
• Inspect adjoining ducts, seals, and mounting tabs; replace any damaged components to ensure a proper seal

This air chamber directs and channels cold air inside the appliance to help maintain even temperatures. Replacing a damaged or cracked air chamber restores proper airflow for more consistent cooling and performance. What it does:

• Channels conditioned air from the evaporator into the cabinet to help even temperature distribution
• Prevents air leaks and redirects airflow to the correct compartments
• Can cause uneven cooling, warm spots, or frost buildup when cracked or broken
• Works with fans and ducts to maintain proper airflow balance

• One air chamber assembly

• Disconnect power to the appliance before beginning service
• Remove interior panels or shelves as needed to access the chamber; handle plastic tabs and clips carefully to avoid breakage
• Inspect adjoining ducts, seals, and mounting tabs; replace any damaged components to ensure a proper seal

A small replacement retainer clip used to secure interior trim or components so panels and shelves stay in place. Replacing a worn or broken clip restores a snug fit and reduces rattling or loose parts. What it does

• Holds trim, panels or small components in place to prevent shifting
• Prevents rattling and keeps parts aligned for proper operation
• Replaces cracked, broken or missing clips that allow parts to sag or fall
• Works wherever the OEM clip design is specified for a secure snap-fit

• Clip

• Disconnect power before servicing appliances with electrical components
• Remove surrounding trim or components carefully to access clip location
• Press or snap the clip into place; avoid forcing to prevent damage
• Keep small parts away from children and pets during installation

This clamp secures a flexible connection inside your appliance, holding a hose or boot firmly to its fitting to maintain a tight, leak-resistant seal and prevent connections from backing off during operation. What it does:

• Holds a hose or boot to a tub, pump, or port to keep the joint sealed
• Helps prevent leaks and disconnections from vibration or pressure changes
• Restores proper sealing when the original clamp is stretched, rusted, broken, or missing
• Typical symptoms include drips at the joint, a loose/slipping connection, or visible clamp damage

• 1 clamp

• Disconnect power and turn off water supply; place a towel to catch residual water
• Note the clamp's position before removal; seat the hose/boot fully over the fitting bead
• Position the clamp just behind the bead and engage/tighten it evenly
• Run a short test cycle and check the joint for leaks

This is a Phillips pan head machine screw commonly used to secure panels and components in appliances. It provides a reliable, low-profile head for flush fastening and easy Phillips-driver installation. What it does:

• Fastens trim, panels, or internal components where a pan head screw is required
• Designed for secure grip in metal or threaded inserts compatible with #10-16 threads
• Helps prevent loosening from vibration when installed to correct torque
• Often used in refrigeration and major appliance assemblies in limited quantities

• One Phillips pan head screw (#10-16 x 5/8")

• Use the correct #2 Phillips driver and steady pressure to avoid cam-out or stripping
• Do not overtighten; stop when snug to avoid damaging threads or mating parts
• Replace only with an identical thread size and head style to ensure fit
• Wear safety glasses when working around sharp sheet metal and springs

The Drain Hose is an OEM part for Frigidaire washing machines. The drain hose transports water from the washer tub to the standalone drain or out the back of a pedestal model during the drain cycle.

Causes can relate to standard hose degradation from constant use, accidental kinking that restricts flow, or physical damage by pets chewing the hose.

Symptoms of a bad drain hose include:

• Puddles or water leaks near the washer during and after cycles
• Smelly or mildewed hose from standing water
• Kinked or cracked hose that no longer fully drains water

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

A simple wire-fastening cable tie that secures wiring and small hoses to prevent rubbing, snagging, or loose routing inside the appliance. Helps keep components organized for safer, quieter operation. What it does

• Secures wiring bundles and small hoses to chassis or brackets to prevent abrasion and movement
• Helps stop intermittent shorts or electrical noise caused by wires rubbing or contacting other parts
• Keeps airflow and moving parts clear by holding wiring away from fans and belts
• Useful when replacing or re-routing harnesses during repairs

• Always disconnect power before working on the appliance.
• Loop tie around wiring or hose, pull to secure snugly, and trim excess tail; do not overtighten.
• Replace ties that are brittle or damaged; use the same routing as the original harness.
• Dispose of trimmed ends and avoid sharp edges that could cut wiring insulation.

The Drain Hose is an OEM part for Frigidaire washing machines. As a key component of the machine's drainage system, the drain hose transports water from the washer tub to the standalone drain or out the back of a pedestal model during the drain cycle.

Causes can relate to standard hose degradation from constant use, accidental kinking that restricts flow, or physical damage by pets chewing the hose.

Symptoms of a bad drain hose include:

• Puddles or water leaks near the washer during and after cycles
• Smelly or mildewed hose from standing water
• Kinked or cracked hose that no longer fully drains water

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a replacement mounting bracket that secures appliance panels and components, restoring proper alignment and stability. A direct-fit part that helps stop loose panels, rattling, or misalignment for safe, reliable operation. What it does:

• Provides a secure attachment point for panels, trim, or internal components
• Restores correct alignment to reduce rattling and vibration
• Prevents parts from shifting or coming loose during operation
• Re-establishes proper fit where a worn or broken bracket allows gaps

• One mounting bracket

• Install with appliance powered off and disconnected from power source
• Use appropriate fasteners and torque to avoid stripping or damage
• Inspect surrounding clips and hardware; replace any damaged fasteners

10-inch heating element that restores proper heat production in affected appliances. Replaces a worn or failed element to help resolve issues like no heat or unusually long cycle times. What it does:

• Generates heat so your appliance can reach normal operating temperatures.
• Common symptoms it addresses: little or no heat, longer-than-normal cycles, or intermittent heating.
• Replaces a single failed element to return consistent heating performance.

What's included: One heating element. Install notes:

• Disconnect the appliance from power before attempting any repair.
• Allow the element to cool and handle carefully to avoid bending or damaging the coil.
• Ensure the terminal connections are secure and free of corrosion; tighten or replace fasteners as needed.

NOTE: IF THERMISTOR HAS TERMINALS WIRE HARNESS HAS TO BE CHANGED PART# 137288900 PER FRIGIDAIRE

The Recirculation Hose is an OEM part for Frigidaire washing machines. It is a flexible plastic tubing that recirculates water inside the washer drum during certain cycles. The recirculation hose is designed to withstand the pressures and temperatures inside the washer during operation, efficiently channeling water flow without kinks or cracks. 

Causes of a bad recirculation hose include wear and tear over time, exposure to mineral buildup or foreign debris inside the washer, or damage due to impact or freezing temperatures. 

Symptoms of a bad recirculation hose include:

• Water leaks from the hose area 
• Excessively long wash cycles
• Poor cleaning performance
• Loud noises coming from the hose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Recirculation Hose is an OEM part for Frigidaire washing machines. It is a flexible plastic tubing that recirculates water inside the washer drum during certain cycles. The recirculation hose is designed to withstand the pressures and temperatures inside the washer during operation, efficiently channeling water flow without kinks or cracks. 

Causes of a bad recirculation hose include wear and tear over time, exposure to mineral buildup or foreign debris inside the washer, or damage due to impact or freezing temperatures. 

Symptoms of a bad recirculation hose include:

• Water leaks from the hose area 
• Excessively long wash cycles
• Poor cleaning performance
• Loud noises coming from the hose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Pump Assembly is an OEM part for Frigidaire washing machines. This part is responsible for draining the water from the washer at the end of each wash cycle.  

Causes of a bad Washer Pump Assembly can include:

• Obstructions in the pump or its inlet/outlet hoses, which can hinder water flow.
• Wear and tear on the pump's motor or impeller, reducing its effectiveness in water evacuation.
• Electrical issues, such as faulty wiring or connections, that prevent the pump from operating.

Symptoms of a failing Washer Pump Assembly include:

• Water not draining properly from the machine.
• The washer fails to enter the spin cycle due to the presence of excess water.
• Unusual noises during the drain phase, indicating a struggling or damaged pump.
• Error codes displayed on the washing machine that indicate drainage problems.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This clamp secures hoses or wiring in place to prevent rubbing, kinking, or contact with hot or moving parts—helping reduce leaks, electrical wear, and vibration noise. Simple replacement restores proper routing and retention. What it does:

• Holds a hose or wire firmly to the appliance frame or tubing to prevent chafing and movement
• Keeps hoses from kinking or pulling loose, reducing risk of leaks
• Secures wiring away from heat sources and moving components to lower wear and short risks
• Helps reduce vibration-related noise by keeping lines in place

• One clamp

• Disconnect power and water before servicing
• Verify clamp orientation and fit before tightening; use pliers or clamp tool as needed
• Replace with the same style clamp to ensure proper fit and function
• If corrosion or surrounding damage is present, inspect adjacent hoses/wires and fasteners

The Recirculation Hose is an OEM part for Frigidaire washing machines. It is a flexible plastic tubing that recirculates water inside the washer drum during certain cycles. The recirculation hose is designed to withstand the pressures and temperatures inside the washer during operation, efficiently channeling water flow without kinks or cracks. 

Causes of a bad recirculation hose include wear and tear over time, exposure to mineral buildup or foreign debris inside the washer, or damage due to impact or freezing temperatures. 

Symptoms of a bad recirculation hose include:

• Water leaks from the hose area 
• Excessively long wash cycles
• Poor cleaning performance
• Loud noises coming from the hose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.