Parts for Kenmore 363.8594884 (3638594884, 363 8594884): Unit Parts

Package of 12

Sealer plug for refrigerators. Seals unused holes or openings in cabinet panels. Replace if cracked, broken, or missing to maintain proper appearance.

Refrigerator not cooling or compressor overheating? The condenser fan motor circulates air through coils to dissipate heat. DIY repair in under 30 minutes.

This evaporator fan blade mounts on the fan motor and circulates cold air across the evaporator coils and throughout the compartments. Replacing a cracked, warped, or loose blade restores proper airflow and stable temperatures.

• Moves air across the evaporator to distribute cooled air evenly
• Helps maintain consistent refrigerator and freezer temperatures
• Common symptoms include weak or no airflow, warm spots, frost buildup on the evaporator cover, and rattling/scraping noises
• Replace if the blade is damaged or spins loosely on the motor shaft

• Disconnect power before servicing
• Remove shelves/bins and the rear evaporator cover to access the fan
• Note blade orientation and seating depth; pull the old blade straight off the motor shaft
• Press the new blade on until fully seated; verify free spin and proper clearance before reassembly

This part has been discontinued by the manufacturer and is no longer available.

This condenser loop tube routes refrigerant between the condenser and evaporator to help dissipate heat and keep your refrigerator cooling properly. Replaces a damaged or corroded tube to restore proper refrigerant flow and heat exchange. What it does:

• Carries refrigerant through the condenser loop so the system can release heat.
• Helps maintain proper cooling performance by ensuring correct refrigerant routing.
• Works as a direct replacement component where the OEM part number WR84X46 is specified.

• One (1) condenser loop tube (WR84X46) as shown.

• Handle gently to avoid kinks or damage to the tube and fittings.
• Inspect surrounding fittings and seals; replace any worn gaskets or clamps to ensure a leak-free connection.

This is a small clip used to secure the condenser tubing or coil in place on the back or underside of a refrigerator. It keeps the condenser components properly positioned for efficient heat dissipation. Replace this clip if it is broken or missing, which can allow condenser tubing to shift, vibrate, or contact other parts and cause rattling noises.

This front air baffle directs cooled air inside the refrigerator compartment to help maintain even temperatures and proper airflow. Replaces a cracked or broken baffle to restore correct air circulation and door seal alignment. What it does:

• Guides cold air from the evaporator into the fridge compartment for balanced cooling
• Helps maintain proper airflow paths so food stays colder and fresher
• Prevents rattling or obstruction caused by a broken or warped baffle
• Supports proper door closure where applicable

• One front baffle assembly

• Disconnect power to the appliance before beginning any work
• Remove any shelves or door bins that block access to the baffle
• The baffle typically snaps or screws into place; align carefully and secure without forcing

Fix a leaking water valve or non-working ice maker and water dispenser. This dual inlet valve controls water flow to both systems. DIY-friendly repair.

Nut for 1/4 inch tubing.

Connects water supply tubing sections in your refrigerator. Replace this plastic compression union if it's cracked, leaking, or broken. Installs inline.