Parts for Electrolux EW27EW65GB2: 05 - Upper Oven Parts

Replace your oven's support plate if it's cracked, broken, or missing. This structural component mounts inside the oven cavity to secure internal parts.

Broiler pan rack for electric ovens and ranges. Replaces cracked, warped, or missing racks. Installs inside broiler pan for elevated cooking.

This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.

• Directs power to the associated circuit when switched on or off
• Common symptoms: function won't turn on/off, intermittent operation, or the switch feels loose/sticks
• Helps restore positive, consistent control from the backguard/control panel

• Disconnect power at the breaker before servicing
• Access the switch from the control panel/backguard; retain screws/clips
• Label/photograph wire positions and transfer leads one at a time to the new switch
• Ensure firm terminal connections, reassemble, restore power, and test operation

This is a halogen light assembly that illuminates the interior of the oven cavity so you can monitor food while cooking. It includes the bulb, socket, and lens cover that mount inside the oven compartment. Replace this assembly if the oven interior light does not turn on, the lens is cracked or discolored from heat damage, or the socket no longer holds the bulb securely.

Replace your range oven door seal to maintain heat efficiency and prevent energy loss. Essential when you notice gaps, cracks, or heat escaping. Verify fit.

Rubber bumper cushions oven or range doors to reduce noise and prevent metal contact. Replace if cracked, worn, or missing to restore proper seating.

Fix F1, F3, or F10 error codes and inaccurate oven temperatures with this sensor. Simple DIY replacement takes about 30 minutes with basic tools.

Oven displaying probe error or reading temperature when unplugged? This meat probe monitors internal food temperature. Easy DIY replacement part.

Secures burner or oven control to the control panel behind the knob. Replace if stripped, missing, or loose to keep control shaft stable and aligned.

Control panel housing cover for wall ovens. Replaces cracked, broken, or damaged exterior panel. Protects internal components and restores appearance.

Sound dampening insulation for ovens and wall ovens. Installs inside the oven cabinet to reduce noise and improve thermal efficiency. Replace if worn, missing, or damaged.

This is a broil element that mounts in the top of the oven cavity and provides direct radiant heat for broiling. It heats food from above for browning, searing, and broiling. Replace this element if the broiler no longer heats, heats unevenly, has visible damage such as blistering or breaks, or if the oven fails to reach broiling temperatures.

This is a 1450-watt hidden bake element located beneath the floor of the oven cavity. It provides the primary heat source for baking and roasting. Replace this element if the oven is not heating from the bottom, takes too long to reach temperature, or cooks food unevenly.

Replace your oven's protective heat shield if cracked, warped, or missing. Installs inside the oven cavity to protect internal components from heat damage.

This replacement front cabinet panel restores the appliance's exterior appearance and helps protect internal components from dirt and damage. It's a direct-replacement exterior panel intended to match the original fit and finish. What it does

• Replaces a cracked, dented, scratched, or otherwise damaged front cabinet surface
• Protects internal parts and openings from debris and accidental contact
• Restores the appliance's original look and cosmetic alignment
• Helps maintain proper airflow paths and door/console clearances when undamaged

• One front cabinet panel

• Disconnect power (and gas, if applicable) before starting any repair
• Basic hand tools usually required; support the panel to avoid dropping or bending
• Handle edges carefully to avoid cuts and prevent damage to finish
• Follow OEM instructions for fastening order and torque

Replace a cracked or missing power board spacer in your range. This insulating bushing mounts between the control board and chassis for proper spacing.

Spacer for ranges and ovens. Maintains proper spacing between components. Replace if worn, cracked, or missing to ensure correct alignment and fit.

Mounting plate that secures the oven to the cabinet or wall. Replace this metal support plate if it's bent, rusted, or missing to ensure proper installation.

Replacement hinge receptacle for range and oven doors. Secures door hinge assembly to frame. Order when original receptacle is cracked or broken.

Fix oven lights that won't turn off, error codes E75/E35/F15, or non-responsive controls. This control board restores normal range operation.

This is a relay control board that manages the switching of electrical power to heating elements and other high-voltage components in the oven. It receives signals from the main control board and activates or deactivates the appropriate circuits. Replace this board if the oven elements fail to heat, heat intermittently, or if you notice error codes related to relay or heating circuit failures.

Mounting screw secures heating element to cooktop surface. Replace if stripped, rusted, or missing to ensure proper element installation and stability.

This cover mounts over the convection fan assembly inside the oven cavity, shielding the fan blades and motor from direct exposure to food debris and grease. It helps direct heated air circulation for even cooking. Replace it if the cover is warped, rusted, cracked, or if you hear unusual rattling noises coming from behind the oven's rear wall during convection cooking.

Fix a range cooling fan that won't shut off or makes howling noises with this motor. Requires removing oven from cabinet and back panel access.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.

Convection fan not working or oven heating unevenly? This motor kit drives the fan to circulate hot air for consistent baking. Moderate DIY repair.

Vent duct adapter for ovens and ranges. Connects vent ductwork to ensure proper airflow. Replace if cracked, broken, or missing for secure fit.

Replacement support plate for ovens and ranges. Mounts inside the oven cavity to secure internal components. Order a new plate if yours is cracked or broken.

Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.

This is a 2500-watt circular heating element located at the rear wall of the oven cavity, surrounding the convection fan. It provides even heat distribution during convection baking and roasting by working in conjunction with the fan. Replace this element if your oven is not heating properly in convection mode, food is cooking unevenly, or the element is visibly damaged or broken.

Positions and supports range components to maintain proper alignment. Replace if cracked, broken, or missing to prevent rubbing and ensure panels fit correctly.

Oven won't heat or shuts off during use? A blown thermal fuse cuts power to prevent overheating. Simple diagnosis with a multimeter, quick replacement.

This electrical wire harness routes power and signals between components to restore reliable electrical connections inside the appliance. It replaces a damaged or worn harness to stop intermittent operation or loss of power. What it does:

• Carries power and control signals between internal components and the main control
• Restores operation when broken, chafed, or disconnected wires cause intermittent power or no power
• Helps eliminate arcing, erratic behavior, or failures caused by damaged wiring
• Matches OEM wiring colors and connector plugs for correct re-connection

• One electrical wire harness assembly

• Disconnect all power (unplug or shut off breaker) before inspecting or replacing the harness
• Replace with the exact harness and route wires following the original routing to avoid pinch points and heat exposure
• Ensure all connectors are fully seated and any locking tabs are engaged
• If you see melted insulation, burning smell, or damaged terminals, inspect nearby components and fuses for related damage

Replacement mounting screw for ovens and ranges. Secures panels, brackets, and components. Order a new screw if yours is stripped, missing, or damaged.

Mounting screw for electric range and wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged during repair.

Wiring harness for wall ovens. Connects electrical components inside the oven cavity. Replace if wires are frayed, burned, or connections are loose.

Mounting screw for electric range, oven, or wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged.

Specs: 8 - 18 x 0.500

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.