Parts for Whirlpool WET4027EW1: 02 - Washer / Dryer Control Panel Parts

Fixes washer that won't advance past rinse, requires multiple attempts to start, or only fills partially. Controls cycle timing and duration.

If your washer won't start the correct cycle or the dial feels unresponsive, this cycle selector switch restores proper program selection and control.

Replacement control dial for laundry center selector knobs. Restores worn, cracked, or missing dials so you can choose cycles and settings with a secure grip.

Control knob for laundry center. Installs on the control panel to operate cycle selection and settings. Replace if cracked, broken, or missing.

Endcap for laundry center and washer dryer combo units. Covers and protects exposed edges or corners. Replace if cracked, broken, or missing.

Replace your laundry center's control dial when cracked, stripped, or missing. Installs on the control panel shaft to restore setting selection.

A 3-position rotary switch that lets the user select between functions or cycles on compatible appliances. Replaces a worn or failed selector control to restore reliable function selection and knob response. What it does:

• Selects between three switch positions to route power/signals for different functions.
• Replaces a faulty selector that causes unresponsive or intermittent knob operation.
• Helps stop incorrect or no-function behavior when the control won't stay in a chosen position.
• Works as the user-facing control for changing modes or settings on the appliance.

• Disconnect power to the appliance before beginning any repairs.
• Take a photo of wiring and knob orientation before removal to ensure correct reassembly.
• Handle terminals gently and reconnect wires to the matching terminals; secure fasteners.
• Test the appliance function after reassembly to confirm correct operation.

This temperature switch (selector) controls oven/burner temperature settings so heat responds to your control inputs. Replaces a failed or worn selector to restore accurate temperature selection and reliable cooking performance. What it does:

• Routes the control knob position to the oven's temperature control circuitry
• Changes electrical contacts as you select different temperature settings
• Common symptom: oven or burner won't reach or hold selected temperature
• Common symptom: temperature knob feels loose, clicks, or doesn't change heat

• Disconnect power (and gas if applicable) before starting work
• Access typically requires removing the control panel or console; keep fasteners and trim organized
• Label or photograph wire locations before disconnecting to ensure correct reconnection

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Dryer won't start when you press the button? The start switch initiates the drying cycle. Simple 10-minute DIY fix with basic tools and our guide.

Round control knob for laundry center control panels. Replaces cracked, faded, or loose knobs on temperature and function selectors. Fits splined shafts.

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

• Produces audible tones for cycle end, timers and other appliance notifications
• Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
• Helps you hear and identify completed cycles and timed alerts
• Small, mountable unit that fits behind the control panel and connects to the control board

• One adjustable buzzer kit

• Disconnect power before servicing to avoid shock risk
• Access may require removing the control panel; keep fasteners organized for reassembly
• Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
• Test buzzer function with power restored before fully reassembling

This Timer is the mechanical cycle controller for your appliance. It sequences power to components so cycles start, advance, and end at the proper times, helping restore dependable operation when the original timer wears or fails.

• Sequences power to motors, valves, and heaters according to the cycle selected at the timer shaft
• Advances the machine through each stage via a motor-driven cam and internal contacts
• Symptoms: cycle doesn't advance or stops mid-cycle
• Symptoms: appliance won't start or only starts intermittently
• Symptoms: runs past the end of the cycle or won't shut off

• Disconnect power before servicing; shut off water supply
• Photograph wiring and transfer wires to the same labeled terminals one at a time
• Reuse the original mounting hardware, dial, and knob
• After installation, run a short test cycle to ensure the timer advances properly

Secures the door hinge to the cabinet frame. Replace if your bracket is bent, cracked, or broken to restore proper door alignment and support.

Endcap for laundry center control panel. Covers the edge of the control console for a finished look. Replace if cracked, broken, or missing.

Secures and stabilizes the washer drum assembly. Replace if loose, rattling, or causing excessive vibration during spin cycles. Verify fit with your model.

This is a D-shaped knob insert or spring clip that fits inside a control knob and connects it to the control shaft on the dryer's front panel. It ensures the knob grips the shaft properly so you can turn the timer or selector. Replace this insert if your control knob spins freely without engaging the shaft or if the knob feels loose and won't stay in position.