Weedeater Parts

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

This genuine Husqvarna filter holder can be used as a replacement part for string trimmers. The function of a filter holder, otherwise known as an air box, is to take in external air flow and channel it through a network of valves into the cylinder of the engine, which is where the fuel combusts and ignites the spark plugs.A filter holder might have to be replaced if it shows symptoms of disrepair or malfunction that prevent it from transferring air flow into the cylinder. These symptoms of damage could include an engine that won't start or misfires frequently, reduced fuel economy, or block smoke pouring out of the exhaust. Though these symptoms are not necessarily directly attributable to the filter holder, if a visual inspection shows that a damaged filter holder is indeed responsible, it should be replaced immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This filter holder is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.

This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

This carburetor adapter attaches to the gasket on some kinds of lawn equipment with small engines. It is made of a durable plastic material, but wear and tear or impact can cause the part to become damaged. If the part is damaged or broken, the carburetor adapter will need to be replaced with a new component.A visual inspection can determine whether the carburetor adapter should be replaced. The fuel lines and throttle linkage will first need to be removed. Next, the bolts on the carburetor should be taken out so the carburetor can be removed. Take the bolts out of the carburetor plate and remove it. This will give access to the carburetor adapter so it can be determined whether it needs to be replaced. Simply install the new part before reassembling the machine so it can be used again.This replacement carburetor adapter is designed for use with string trimmers and pole pruners manufactured by Craftsman, Poulan, Poulan Pro, and Weed Eater. It is a genuine OEM part that is directly sourced from the manufacturer. This part is sold as an individual component.

This is a carburetor adapter. If this part is broken or deteriorated the carburetor may not function as efficiently, potentially causing the engine to misfire or reducing engine performance. In an internal combustion engine the carburetor is responsible for sending a combination of fuel and air to the motor for ignition. This carburetor adapter fits between the cylinder and carburetor to improve the functionality of the carburetor and, ultimately, the performance of the engine. This part is manufactured from high-quality and durable plastic. This carburetor adapter is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor adapter fits various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This is a gear set kit that is designed for use with many edgers for the lawn and garden. The gear set kit comes with various components that can be used as replacements when the gearbox is experiencing issues in the trimmer. In some cases, the durable metal gears can undergo wear and tear or become damaged. If the gears have worn, they may not make contact with other components, and the edger will not start or run properly. If this is occurring, the gear set kit can be used to replace the parts.A socket set and a small bearing puller are both useful for making the replacement on an edger. The blade will need to be removed, followed by the gear cover. Take out the bolt that holds the clutch hub and drive gear together. Remove these from the case and pull the bearings off. At this point, the old drive gear can be replaced with components from the kit.This kit is sold as a single unit. It is an authentic OEM replacement kit that is sourced directly from the manufacturer. The gear set kit is made to be compatible with a selection of edgers from Weed Eater and Craftsman.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This genuine Husqvarna gasket kit for a hedge trimmer or a string trimmer contains the gasket and the fastening components required to attach the gasket to the engine and seal the engine, thereby protecting it from damage. Symptoms of a blown gasket can include smoke pouring out of the exhaust, an overheating engine, or oil leakages. If any of these symptoms can be directly attributed to the gasket, it should be removed and replaced immediately before using the hedge trimmer or string trimmer again. If the blown gasket has also damaged the fastening components, a full gasket kit should be ordered to replace every component of the gasket. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This gasket kit is compatible with the following brands: MTD and Cub Cadet. This part is sold individually.

This replacement part is a throttle kit. It is a genuine replacement part made by Husqvarna. It is important that this part is able to be used properly so that the user is able to operate the machine effectively and efficiently. A new throttle kit might be needed if the current machine is having trouble starting up or is starting slow. This can be due to the throttle not being connected properly. It is true that the throttle can become worn down over time and it is recommended that it be replaced if this is the case. Be sure to reference the specific owner's manual for more details on how to install this part on the device. This part is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This certified OEM replacement part is a carburetor kit for a gas-powered leaf blower engine. For gas to ignite in an engine, there has to be the right amount of air in the system. Without oxygen, the spark won't light and the gasoline will not ignite. A carburetor is responsible for maintaining the right balance of air and gasoline. Therefore, without a properly functioning carburetor, the engine will also not function properly. Carburetors begin to break down over time because of built up exhaust and gunk in the engine. As this grime builds up, the carburetor cannot get enough air and the balance is thrown off. While carburetors can sometimes be cleaned, if it has become overly clogged or damaged, it will need to be replaced. Signs of a faulty carburetor include shakiness and black smoke, backfiring, hard starts, or an engine that will not start at all. Replacing a leaf blower's carburetor requires the crankcase line, primer line, fuel line, air filter, and throttle linkage to all be disconnected using pliers and a screwdriver. This part is intended for Craftsman, Poulan, Weed Eater, and Husqvarna leaf blowers and is sourced from the original manufacturer. It ships individually.

This is a starter pulley that is used with various types of string trimmers from major manufacturers.The pulley keeps the starter rope in the right location so that the chainsaw comes on and offers cutting power. Through wear and tear or impact, the starter pulley can break or become damaged.If a user pulls the starter rope and the engine does not start, the starter pulley may not be working correctly. It will need to be replaced. Before the replacement is made, make sure the tool is turned off and the spark plug wire is disconnected. The starter pulley and rope can be reached by disassembling the trimmer. The recoil spring should be rewound before the rope is threaded back in.This starter pulley is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is made for use with string trimmers manufactured by Turf King, Craftsman, Paramount, Weed Eater, Poulan, and Poulan Pro.

This hub is a genuine Husqvarna replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The hub is a crucial piece of a lawn trimmer that turns the string with enough force to cut through plant material. The hub contains the string that is unspooled when the engine is running and a cap with piercings through which the string is unspooled. A lawn trimmer hub might have to be replaced if an incompatible string is used on the lawn trimmer, such as a heavier string that cannot be properly spooled and unspooled by the hub. Additionally, a hub might have to be replaced from general overuse or long-term use. To remove and replace the hub, one will need a Phillips screwdriver, a flathead screwdriver, and an adjustable wrench. If the hub is damaged to the point that the lawn trimmer is unusable, the hub should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This hub is compatible with the following brands: Husqvarna, Poulan, and Weed Eater. This part sold individually.

This left hand runner bracket is a genuine Husqvarna part, sold individually. This left hand runner bracket can be used as a replacement part in a lawn mower. This part is used to secure components within the appliance.If the left hand runner bracket suffers damage in the form of puncturing, scraping, denting, cracking, chipping, warping, or eroding, it should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. It is a simple replacement process that will only require basic tools to conduct.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This left hand runner bracket is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This tire is a genuine Husqvarna part, sold individually. This tire can be used as a replacement part for a lawn mower. The purpose of a tire is to facilitate the steering of the appliance so an operator can navigate the appliance over a variety of surfaces in order to mow and clip the greenery.The tire of a lawn mower might have to be replaced at some point within the standard lifespan of the appliance if the tread or the internal structure is punctured, torn, ripped, scraped, or eroded beyond repair. If this occurs, the tire should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. It is a simple repair process that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.