Weedeater Parts

Replacement brake return spring for lawn tractors and riding mowers. Installs on the brake assembly to restore proper brake release function when original is broken, stretched, or missing.

Right-hand spindle assembly connects the front wheel to the axle on riding mower tractors. Replace if cracked, bent, or worn for proper steering.

Replacement mulch door for walk-behind lawn mowers. Closes the discharge chute to enable mulching. Replace if cracked, bent, damaged, or won't stay in place.

Mandrel pulley for riding mower tractors. Mounts on the mower deck spindle to drive cutting blades. Replace if cracked, worn, or damaged.

Replacement spring for gas and grass line trimmers. Installs to connect moving parts. Replace if stripped, broken, or no longer holds tension properly.

Hinge rod for walk-behind mower discharge chutes. Allows chute to pivot while staying attached. Replace if bent, broken, or missing to secure chute.

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

Wheel gauge bracket kit for 42-inch riding mower decks. Replaces cracked, bent, or missing brackets that support gauge wheel assemblies.

Mower won't move forward or backward? This transmission gear connects to the drive shaft to transfer power to the wheels. Direct fit replacement.

This replacement v-belt is designed for use in select high-wheeled trimmers. The belt is responsible for driving the cutter head, and is sometimes called the drive belt or trimmer drive belt. It attaches to the axle and the cutter and as the belt rotates, it turns the cutter head so that it can do the trimming. Over time, this belt can become worn, stretched, or twisted. This will require a replacement in order to ensure peak performance of the trimmer. With this OEM trimmer v-belt replacement, it will be easy to get back to work. This genuine OEM v-belt is designed for use in trimmers from Husqvarna, Poulan, Craftsman, Roper, and Weed Eater. It is made of durable composite rubber material and includes a one-year warranty from the manufacturer against defects. Replacing the belt requires a screwdriver and pliers. Always allow the engine to cool completely and wear gloves for hand protection. Beware of pinching or crushing injuries when replacing belts and other tensioned parts. This belt is sold individually and does not include any hardware or additional components.

Handle knob for lawn mowers, snowblowers, and trimmers. Attaches to upper or lower handle adjustment levers. Replace when cracked, broken, or missing.

Deflector shield for riding mower bagging chute. Guides clippings and debris into bag. Replace if cracked, broken, or missing for proper collection.

Cotter pin fastener for riding mowers and lawn tractors. Secures moving parts and linkages. Replace if bent, broken, or missing to restore proper assembly.

This steering bushing is a genuine MTD part, sold individually. This steering bushing can be used as a replacement part in a lawn mower. The purpose of the steering bushing is to mitigate and prevent the excessive vibration and shocks that could result from the steering wheel during the operation of the lawn mower.The steering bushing in a lawn mower might have to be removed and replaced by this genuine OEM replacement part if it can no longer serve its function of minimizing vibration. It is a simple replacement process that will require only basic tools to properly execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This steering bushing is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, Ariens, and Dixon.

Spring clip retainer fastener for riding mower and tractor assemblies. Replace this clip if broken, missing, or no longer holding components securely.