Weedeater Parts

This steering bushing is a genuine MTD part, sold individually. This steering bushing can be used as a replacement part in a lawn mower. The purpose of the steering bushing is to mitigate and prevent the excessive vibration and shocks that could result from the steering wheel during the operation of the lawn mower.The steering bushing in a lawn mower might have to be removed and replaced by this genuine OEM replacement part if it can no longer serve its function of minimizing vibration. It is a simple replacement process that will require only basic tools to properly execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This steering bushing is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, Ariens, and Dixon.

This ignition switch kit is a genuine MTD part, sold individually. This ignition switch kit can be used as a replacement part in a lawnmower. The purpose of the ignition switch kit in a lawnmower is to provide all of the necessary components and fasteners required to replace an ignition switch, which is used to power on the engine and operate the lawnmower across a variety of surfaces.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This ignition switch kit is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.

This replacement part is a grip handle. This is a genuine replacement part made by Husqvarna. This grip handle allows the user to have a stronger and more secure grip while maneuvering the machine to the desired areas. A new grip handle might be needed if the current one is missing or damaged. If the handle is not up to working condition it might not feel comfortable to hold. This might mean that the user will not be able to maneuver the machine. If this is the case the grip handle should be replaced as soon as possible. The repair should be fairly easy and only require common household tools. This grip handle is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a replacement knob for a trimmer. The plastic bump knob, which is connected to a spring, is used to secure the spool. A bump knob on a trimmer may get stuck or seized and will need a replacement. Before replacing the bump knob, remove the wire from the spark plug to avoid the accidental starting of the engine. Pull off the trimmer head housing and then use a flat head screwdriver to detach the old knob. Rotate it and then remove the component. Make sure the spring is in place then align the knob before rotating and snapping it in place. Take note that pulling the knob off may take extreme force when pulling. Some knobs are screw-mounted and a counterclockwise turn is necessary to unscrew it. This genuine OEM replacement part is sold individually and is compatible with specific trimmer models from Poulan and Weed Eater.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This part is a replacement carburetor assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective carburetor in leaf blowers.Carburetors are critical for the proper functioning of an internal combustion engine as they enable the proper mixture of air and fuel for ignition. If the carburetor is faulty, the equipment may not run properly or may not turn on at all. Thus, the carburetor will need to be replaced. When working on or near an engine it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this carburetor assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This carburetor assembly can be used with different models of leaf blowers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

Blowers are often designed with gas-powered engines. When a blower has adequate fuel, but the engine does not start, it could be a problem with the carburetor. This is the part that mixes air and fuel to send into the engine. If an engine starts and dies or fails to start at all, the carburetor may need replacement. This replacement for a blower carburetor works with Craftsman and Poulan blowers, and is compatible with a long list of models. This is an OEM replacement part that features a metal body and which incorporates the rubber primer bulb necessary to begin the starting process. It ships individually and is will require pliers and a screwdriver to make the repair.

This piston kit is an important component for many brands of gas-powered leaf blowers. The piston is tasked with separating the combustion chamber of the engine from the crankcase and the connecting rod that drives the crankshaft. As a kit, this product comes with both the needle bearing and the rod pin needed to replace the piston components. If a leaf blower is no longer starting, it could be related to this component. If that's the case, it will need to be replaced.The piston kit can be used to replace a damaged piston. A wrench set and a screwdriver will be required to make the replacement. Start by placing the leaf blower on a solid surface and removing the spark plug wire. After disassembling the leaf blower to gain access to the engine, the engine will also need to be disassembled to put in the new piston kit components.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as a single component. The piston kit is designed to fit leaf blowers manufactured by Poulan, Poulan Pro, Craftsman, and Weed Eater.

This replacement part is a carburetor assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This carburetor assembly is used in leaf blowers and snow blowers and is part of the engine. This part is one of the most important parts of the machine and is responsible for allowing it to run smoothly.A new carburetor assembly might be needed if the current engine is slow to start, slow to stop, or won't start at all. This can be due to a malfunctioning carburetor and create problems within the machine. Be sure the appliance is completely powered down before replacing this part. work gloves are recommended to ensure safety during any type of repair.This carburetor is sold individually and is a genuine OEM replacement part. This is also sourced directly from the manufacturer.

The air filter on lawn machines protects from dirt and debris. Lawn equipment typically creates a substantial amount of dust and dirt, and the air filter is needed to ensure that dirt does not get into the engine and the carburetor. The air filters are designed to trap dirt, which means that they will eventually need to be replaced. The longer they are used, the more clogged they will become. This can prevent enough air from getting into the carburetor, which could result in issues with the engine misfiring and starting properly. Owners should regularly check the condition of the air filters and replace them when they become too dirty. This is a genuine OEM part sold individually that will replace air filters on trimmers, leaf blowers, and pole pruners. The part is compatible with a range of brands including Craftsman, Weed Eater, Poulan, and Husqvarna.