White Westinghouse Range Valve

Genuine Frigidaire part

White Westinghouse Surface Burner Valve

By: Frigidaire

Part Number: 5303935305

This is the gas control valve for a surface burner. It regulates gas flow to the burner head so you can ignite the flame and adjust heat output safely and smoothly.

Controls and meters gas to an individual cooktop/range burner
Worn or leaking valves can cause hard-to-adjust flames, no flame, or gas odor
A sticking or stripped valve stem can make the knob hard to turn or fail to shut off fully
Helps restore precise flame control and reliable ignition

What's included: One surface burner valve only Install notes:

Disconnect power and shut off the gas supply before servicing
Allow the appliance to cool; work in a well-ventilated area
Transfer any mounting hardware or orifice components from the old valve
Check for leaks with an approved leak-detection method after reassembly and gas restoration

Do-It-Yourself Stories from Customers like You A failed stove top burner valve Robert S. • Ventura , CA • December 08, 2015

After turning off the gas and unplugging the electricity, I removed all the burners from the stove top using a 3/16" hex socket. Then used a 1/4" socket to removed two or three screws under each burner which hold the burner base to the bottom of the top panel. Then pulled all the knobs and removed the front panel which was held in by two Phillips screws accessible from underneath the panel. It helps to open the oven door to get at these screws. With the knob panel gone, I removed two screws... Read more

$59.95

Compare At:: $71.34
You Save:: $11.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Frigidaire part

White Westinghouse Surface Burner Gas Valve

5.0 (2)

By: Frigidaire

Part Number: 5304458372

This is a replacement surface burner gas valve. It controls gas flow to a cooktop/range burner so you can safely turn the flame on/off and adjust heat. Replacing a worn or leaking valve restores precise flame control and safe shutoff. What it does:

Opens and closes to supply gas to a surface burner
Provides smooth flame modulation from low to high
Helps ensure a complete shutoff in the Off position
Common symptoms: knob hard to turn or loose, gas odor at the control area, flame won't adjust or won't shut off completely

What's included:

1 gas valve

Install notes:

Disconnect power and shut off the gas supply before servicing
Note valve orientation and tubing layout before removal
Use an approved gas-rated thread sealant on male pipe threads; do not overtighten
After installation, leak-test all connections and verify proper burner operation

Do-It-Yourself Stories from Customers like You Stove burner valve leaked Ron F. • Jerome , MI • July 27, 2015

Ordered a new valve from you which was shipped the same day and arrived two days later,With excellent tracking. Had a little trouble installing it. However, I called , talked to your service rep who emailed me a service manual and even told me what page to look on. It can't get much better than that. Read more

$45.95