White Westinghouse Range Parts

• Won't start
• Element will not heat

After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty. One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove... Read more

• Gas smell
• Gas igniter glows, but will not light
• Little to no heat when baking
• Won't start

My Tappan Range, which I paid a grand total of $65.00 for, and have been using since Katrina, (Katrina in 2005 is how we measure time in South Mississippi.) I live in an old house, and I am old, too. Last winter was the coldest I can remember, and my husband (older than I and far more hard-headed) used the oven like a heater. I read all user's manuals, because I use only used stuff, I can download the manuals or read them online, and it clearly stated in there NOT to use the oven as a... Read more

My Kenmore 790.74139310 gas range was taking over 30 minutes to reach 350F. It used to take a little less than 10 minutes. The problem was the ignitor for the lower gas burner. It would glow but not pass sufficient current to increase the gas flow to the lower burner. Once at temperature, there is of course loss of heat when loading the oven with room temperature food. This took too long to recover, so we did not have proper temperature for proper cooking for the first 30 to 40 minutes. Food... Read more

• Element will not heat

I googled "drip pans for electric range" and came upon your web site as well as some others. After looking at three or four I decided to go with your company. The choices clearly described the pans available so I didn't have to guess which one would fit. The price was very good and they arrive in the mail two days after I ordered them. The drip pans fit perfectly. Thank you. Charles Cummings Read more

Replaced igniter. Problems solved. Read more

I googled "drip pans for electric range" and came upon your web site as well as some others. After looking at three or four I decided to go with your company. The choices clearly described the pans available so I didn't have to guess which one would fit. The price was very good and they arrive in the mail two days after I ordered them. The drip pans fit perfectly. Thank you. Charles Cummings Read more

• Element will not heat
• Won't start

The receptacle that held the burner element in place was broken so the burner would not make a connection and heat up. I ordered the receptacle kit. There was even an online video that showed how to make the repair. It just took a screwdriver and wire cutters and about 15 minutes and the job was done. The burner works great. Read more

• Oven is too hot
• Oven not heating evenly
• Little to no heat when baking
• Won't start

Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove... Read more

• Element will not heat

I went to a local stove parts store to find a replacement. The store ordered the element for me and promised that it would arrive the next day. I waited for seven 'working' days,but the part never came. So I went online, and found the part in AppliancePartsPros.com. I ordered it in the evening of November 5, 2014, and the part was delivered the next day, November 6 at 11.08AM! Fantastic! I don't know how they could deliver that fast. But clearly, nobody could beat that service. The part fits... Read more

• Little to no heat when baking
• Oven not heating evenly
• Won't start

One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it... Read more

I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair. Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same... Read more

• Won't start
• Element will not heat

My old White Westinghouse stove has easy replacement of the elements & drip pans. They literally pop in & out with no effort or education necessary. Read more

Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more

Replaced guides Read more

First off, shipping was ridiculously fast. Ordered at 3:30pm EST, shipped same day, and arrived at my house by 10:30am the following day. This was with standard shipping. Granted, the package only was delivered from one state away, but WOW, was not expecting that. Replacement of the control board was much easier than I expected. I truly had it fixed in 15 minutes. The video was pretty much spot on. I user a single edged razor blade to carefully go around the edge of the overlay and remove it... Read more

Replaced ignitor. Very simple project. Read more