White Westinghouse Washer Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134511600
The Washer Drive Belt is an OEM part for Frigidaire washing machines. This belt connects the motor to the drum, enabling the drum to rotate during the wash and spin cycles. It ensures the proper transfer of power from the motor to the drum, allowing the washer to agitate and spin effectively.
Common causes of a bad drive belt include normal wear and tear, overloading the washer, or a misaligned drum that puts extra strain on the belt.
Symptoms of a bad washer drive belt include:
- The washer drum not spinning or agitating
- A burning smell during operation
- Unusual noises such as squealing or grinding
- The washer stopping mid-cycle
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Spins slowly
-
Burning smell
-
Pumps but will not spin
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Noisey bearing on spin cycle Neal G. • Klamath Falls , OR • February 14, 2016
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple.
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051000
The Drum Drive Belt is an OEM part for Frigidaire dryers. It connects the drum to the motor, enabling the drum to rotate and tumble the clothes during drying cycles. The belt is 54 inches long and 5/8 inches wide
You should replace this drum drive belt if it becomes worn out, frayed, or broken due to the high heat and friction involved in the drying process. Additionally, improper loading or overloading of the dryer can cause the belt to stretch or snap.
Symptoms of a bad drum drive belt include:
- Dryer drum not turning
- A loud thumping or squealing noise during operation
- Dryer stopping mid-cycle
- Clothes remaining wet after the drying cycle
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Severe banging during spin cycle Vince V. • Benson , AZ • March 03, 2019
With more difficulty and frustration than expected but it works fine now.
Things learned:
1. Order only 3 replacement pins. One comes with the shocks that you can't be sure you see in the picture.
2. A circuit board in a plastic box mounted to the floor, left rear, must be removed by two screws to be able to get pliers onto the head of the pin more easily. This helps installation too.
3. A 1/2" deep socket pushed onto the retaining tab of the pin stays there while you pull with pliers from the...
Read more
More
$21.95
- Compare At:
-
$30.17
- You Save:
-
$8.22
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051003
The Drive Belt is an OEM part for Frigidaire washing machines. This part transfers the rotational force from the motor to the drum, enabling the tumbling action during wash cycles.
Causes of a bad Drive Belt include wear and tear over time, exposure to excessive heat or moisture, or physical damage from improper installation or foreign objects.
Symptoms of a faulty Drive Belt include:
- Loud squeaking or grinding noises during the wash cycle
- The drum not spinning or rotating properly
- Slipping or failure to agitate during wash cycles
- Excessive vibrations or shaking from the washer
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No error codes; just lots of noise and movement James S. • Winchester , TN • April 29, 2023
After a few days of our 16 YO Frigidaire Affinity front-loading washer (model ATF7000EG0) dancing around the room bellowing like an elephant in musth, I decided to fix it. Well, technically, my wife decided I would fix it. I postulated that the OEM tub suspension system was rapidly deteriorating, so I ordered the shock absorber kit (5304485917), three nylon pins (131268300), two suspension springs (134362800), and a new drive belt (134051003) for good measure. These parts all arrived in...
Read more
More
Maintaining a White Westinghouse washer becomes straightforward with White Westinghouse washer belt replacement parts. These essential components ensure your washing machine runs smoothly, providing the reliable performance you've come to expect. Whether you need to keep your appliance in top condition or maintain its functionality, replacing the washer belt is crucial.
Washing machines are vital in keeping our clothes clean and fresh, and White Westinghouse washer parts play a significant role in ensuring these appliances work efficiently. The washer belt connects the motor to the drum, allowing it to spin during wash cycles. This small yet mighty part can wear out over time, affecting the machine's performance. Choosing OEM replacement parts guarantees quality and compatibility, ensuring your washer operates as intended.
Quality White Westinghouse washer belts are readily available, providing peace of mind. These belts meet the exact specifications needed for optimal performance. When it comes to maintaining or restoring your washing machine, having access to reliable parts means you can keep your appliance working like new, ensuring longevity and efficiency.
More