Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

White Westinghouse Washer Switch

White Westinghouse Water Level Pressure Switch (Washer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762000

This water level pressure switch senses tub water level through an air hose and signals the control when to stop filling and allow spin. Replacing a failed switch restores proper fill levels and reliable cycle progression. What it does:

  • Monitors water level via air pressure from the tub's air dome hose
  • Signals the control to start/stop filling at the correct level
  • Prevents overfilling and enables spin only when the tub is empty
  • Common symptoms: overfills or underfills, won't fill, keeps filling, won't advance or won't spin
What's included:
  • Pressure switch
Install notes:
  • Disconnect power and water supply before servicing
  • Access the switch (typically under the top or rear panel) and release its mounting clip/screws
  • Transfer wires one at a time; move the air hose to the new switch and ensure a tight, unobstructed connection
  • Secure the switch and run a test fill/spin; inspect the air hose for kinks, cracks, or soap residue

Do-It-Yourself Stories from Customers like You Washer would stop after about 30 second on fill cycle diagnostic code of e32   Kenneth B. • Friendswood , TX • June 04, 2016

The E32 diagnostic code that the Frigidaire washer was throwing after a quick water fill attempt was not in the supplied Data Sheet that came with the washer and Frigidaire would not provide and updated Data Sheet because, "it's a liabiliity issue" was their statement, but they did tell me that the problem was in the Fill Pressure Sensor/Wire Harness or the Main Control Board (the display board). I ordered the Pressure Sensor and Main Control Board from AppliancePartsPros after checking... Read more

More
$81.70
Compare At:
$96.41
You Save:
$14.71

IN STOCK
Ships Today Guaranteed
Add to Cart
White Westinghouse Switch-Pressure
Genuine Frigidaire part
By: Frigidaire
Part Number: 134680100

 

This part fixes the following symptoms
  • Will not stop filling with water
See more...
More
$81.72
Compare At:
$97.25
You Save:
$15.53

IN STOCK
Ships Today Guaranteed
Add to Cart
White Westinghouse Switch-Temp
Genuine Frigidaire part
By: Frigidaire
Part Number: 134404900

 

More
$47.37
Compare At:
$56.37
You Save:
$9.00

IN STOCK
Ships Today Guaranteed
Add to Cart
White Westinghouse Pressure Switch (Pressure Sensor), 1 Count
Genuine Frigidaire part
By: Frigidaire
Part Number: 134411600

This pressure switch is a replaceable pressure-sensing control that tells the appliance when system pressure has reached a set level so the unit can advance through cycles correctly. Installing a working switch restores reliable pressure-based control. What it does:

  • Senses system air/water pressure and sends a signal to the control board
  • Helps the appliance detect fill, drain or airflow conditions used to advance cycles
  • Common symptom: appliance shows pressure or fill-related errors or fails to progress through cycles
  • Can correct intermittent or no-response behavior when the original switch is faulty
What's included:
  • One pressure switch
Install notes:
  • Disconnect power (and water if applicable) before servicing
  • Remove and replace only with the exact matching part number
  • Handle vacuum/pressure tubing carefully; ensure airtight connections
  • Verify operation with a multimeter or by following OEM test procedures

Do-It-Yourself Stories from Customers like You Pressure switch for water level selection broken on washer   Brandon S. • Bowdon , GA • June 18, 2018

First I unplugged the power cord for the washer. I removed the back plate of the control panel. Then removed the knob and unscrewed the screw holding the broken pressure switch. I then swapped the three electrical cables one at a time and placed on the new pressure switch. Then I put the screw in to hold the switch in place. I replaced the knob, plugged in the washer and turned it on. The appliance immediately worked. Read more

More
$99.45
Compare At:
$119.34
You Save:
$19.89

IN STOCK
Ships Today Guaranteed
Add to Cart
White Westinghouse Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134403500

 

More
$15.23
Compare At:
$17.97
You Save:
$2.74

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
White Westinghouse Switch-Temp
Genuine Frigidaire part
By: Frigidaire
Part Number: 134404200

 

More
$30.54
Compare At:
$36.65
You Save:
$6.11

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
White Westinghouse Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134892900

 

More
$12.95
Compare At:
$15.41
You Save:
$2.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
White Westinghouse Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 137014900

 

More
$29.63
Compare At:
$34.96
You Save:
$5.33

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
White Westinghouse Switch, Water Level
Genuine Frigidaire part
By: Frigidaire
Part Number: 131395500

 

More
$124.34
Compare At:
$146.72
You Save:
$22.38

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
White Westinghouse Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 137014600

 

More
$43.54
Compare At:
$52.25
You Save:
$8.71

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
White Westinghouse Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 137014700

 

More
$18.24
Compare At:
$20.29
You Save:
$2.05

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

White Westinghouse washer switches play a crucial role in keeping your laundry running smoothly. These essential components ensure that your washing machine operates efficiently and reliably. Whether you're starting a wash cycle or managing water levels, a dependable switch is key to seamless performance.

White Westinghouse parts, including washer switches, are designed to maintain and restore the functionality of your appliance. These switches are the unsung heroes that communicate between the various elements of your washer, making it possible for your cycles to run as intended. Having a high-quality, compatible switch ensures your washer continues to meet your household's needs.

Opting for OEM replacement parts guarantees that the components fit perfectly and function just as well, if not better, than the originals. This not only prolongs the life of your washing machine but also maintains its efficiency. OEM White Westinghouse washer switches are crafted to meet the exact specifications of your machine, ensuring a seamless fit and reliable performance.

If you ever find yourself in need of a White Westinghouse washer switch, rest assured that top-quality and well-fitting options are available to keep your washing machine in peak condition. Making the right choice with these replacement parts means your appliance remains a steadfast helper in your home.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store