Whirlpool Cooktop Knob, Dial & Button

This replacement control knob provides a secure, easy-to-grip interface for operating a range or oven control shaft so you can select heat and function settings confidently. Restores tactile control when an original knob is missing, cracked, or worn. What it does:

• Replaces a worn, cracked, or missing control knob so you can turn the control shaft easily
• Fits a standard push-on control shaft and transmits user input to the appliance control
• Helps stop slipping or spinning problems caused by stripped or damaged knobs
• Improves safety and usability by restoring a reliable grip and clear pointer position

• Push the knob straight onto the control shaft until it seats; do not force or twist excessively
• Always unplug the appliance or shut off power at the breaker before working near controls
• Inspect the shaft and splines for damage; replace the shaft or switch if the knob still slips
• Keep removed hardware and broken pieces away from children and pets

This replacement dial is the printed indicator plate that sits behind a control knob. It restores clear, easy-to-read setting marks so you can quickly choose the desired option and operate the appliance confidently.

• Mounts behind a selector/control knob to display settings and reference marks
• Helps ensure accurate selection and proper knob orientation
• Replace when markings are faded/illegible or the dial is cracked, warped, or missing
• Symptoms include difficulty reading settings and cosmetic damage on the control panel

• Disconnect power to the appliance before servicing
• Pull the control knob straight off the shaft
• Remove the old dial; align the new dial with the panel/indexing
• Reinstall the knob and verify pointer-to-mark alignment

RF White

This white control knob replaces a worn, cracked or missing control knob so you can reliably select settings on your appliance's control shaft. It provides a clean, easy-to-grip interface for adjusting temperature or function settings. What it does:

• Fits onto a splined control shaft to allow selection of settings or temperatures
• Restores secure, tactile rotation when the original knob is loose or damaged
• Eliminates slipping or inability to turn the control caused by broken knobs
• Helps prevent accidental changes by providing a proper grip and stop alignment

• Disconnect power (and gas if applicable) before servicing the appliance for safety
• Pull the old knob straight off the control shaft; align splines and push the new knob on until fully seated
• Do not force the knob; if it does not fit easily, confirm spline type and orientation
• After installation, restore power and verify proper control operation

The Range Burner Knob is an OEM replacement part for Whirlpool electric ranges. Due to regular use, high temperatures, or accidental impact, the knob can degrade over time, resulting in issues like slipping, cracking, or improper alignment with the infinite switch.

Color: Stainless

Symptoms of a faulty Range Burner Knob include:

• Difficulty in adjusting burner settings
• Slippage or looseness when turning the knob
• Cracks, breaks, or a missing knob

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This white control knob replaces a worn, cracked, or missing selector knob so you can restore tactile control and accurate setting selection. Simple cosmetic and functional replacement for common Whirlpool control panels. What it does

• Replaces a damaged or faded control knob so settings can be selected reliably.
• Provides a secure grip for turning temperature, cycle, or function selectors.
• Helps stop slipping, wobbling, or incomplete engagement when rotating the control.
• Restores a clean, matching appearance to the appliance control panel.

• Disconnect power (or unplug) before replacing to avoid electric shock.
• Most installations are tool-free — knob typically pulls straight off the shaft; if a set screw is present, loosen it first.
• Align the knob on the control shaft and press firmly into place; verify full function before reapplying power.

This replacement control knob restores a secure, easy-to-grip interface for selecting settings on compatible appliances. It replaces a cracked, loose, or missing knob so you can reliably turn controls and change cycles or temperatures. What it does:

• Provides a firm grip for rotating a control shaft to select settings
• Replaces damaged, worn, or missing knobs that slip or won't engage
• Restores proper alignment with the control shaft splines for accurate selection
• Commonly used when a knob is cracked, loose, or completely broken

• Disconnect power to the appliance before servicing to avoid shock or injury
• Most knobs pull straight off the control shaft; align splines and push the new knob fully onto the shaft
• If knob is secured with a set screw, loosen/tighten with the appropriate screwdriver; do not overtighten

Color: White.

This replacement control knob provides a simple, reliable way to operate your appliance's settings. It restores a secure grip and clear pointer for accurate selection of temperature or function. What it does:

• Fits onto the control shaft to allow turning of temperature or function settings.
• Replaces cracked, stripped, loose, or missing knobs that are hard to grip or won't stay set.
• Provides a clear pointer for easier reading of dial positions.
• Restores normal manual control without needing a full console replacement.

• Disconnect power (or shut off gas) before servicing to avoid injury.
• Most knobs pull straight off the control shaft and push on the new knob until seated; align the pointer as needed.
• If the knob is tight or stuck, use steady, even force or a gentle pull tool; do not force at an angle.

Color: Stainless

This replacement control knob lets you set and adjust heating levels on a stove or oven. It restores a secure, easy-to-grip interface so you can accurately choose burner or oven settings. What it does

• Fits onto a stove or oven control shaft to change temperature or burner settings.
• Provides a clear tactile grip for reliable adjustments.
• Helps resolve issues like a broken, stripped, loose, or missing knob that's hard to turn.
• Works as a direct replacement when the original knob is cracked, worn, or lost.

• Disconnect power to the appliance or ensure controls are off before installing.
• Align the knob splines with the control shaft and press firmly until seated.
• If the old knob is stuck, use a gentle pulling motion or a plastic puller to avoid damaging the shaft.

The Burner Knob is an OEM replacement part for Whirlpool ranges. It is designed to control the individual burners on your range, allowing you to adjust the heat levels for cooking.

A bad burner knob can occur due to wear and tear, damage, or malfunction. If you notice symptoms such as difficulty turning the knob, a loose or wobbly fit, or the inability to adjust the burner heat properly, it may be time to replace the burner knob.

Symptoms of a bad burner knob include:

• Difficulty turning the knob
• Loose or wobbly fit
• Inability to adjust the burner heat properly

Repair your range by replacing the faulty or damaged burner knob with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Stainless

This replacement control knob attaches to a control shaft to select cycles, temperatures, or burner levels. It restores a secure, accurate feel when the original knob is cracked, stripped, loose, or missing.

• Mounts to the control stem to transmit rotation and set the desired function or level
• Provides a firm grip and clear indexing for consistent selection
• Replaces worn or damaged knobs that slip, wobble, or fall off
• Typical symptoms: spins freely, won't stay on the stem, or is visibly broken

• Disconnect power; also shut off the gas supply
• Pull the old knob straight off the stem; wiggle gently—avoid prying on the panel
• Align the new knob with the stem and press straight on until fully seated
• Verify smooth rotation and proper engagement before restoring power or gas

The Knob is an OEM part for Whirlpool ranges. It is responsible for controlling and adjusting the settings of your range, such as the temperature and cooking functions.

A bad range knob can occur due to regular use, accidental damage, or wear and tear over time. If you notice symptoms such as a loose or wobbly knob, difficulty in turning or adjusting the settings, or a broken or cracked knob, it may be time to replace this part.

Symptoms of a bad range knob include:

• Loose or wobbly knob
• Difficulty in turning or adjusting the settings
• Broken or cracked knob

Restore your range by replacing the faulty or damaged range knob with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.