Whirlpool Cooktop Knob, Dial & Button

This is the thermostat knob that mounts on the control shaft so you can set the temperature. Replace a cracked, stripped, or missing knob to restore smooth, reliable adjustments and clear control of your settings.

• Attaches to the thermostat shaft to select and adjust temperature
• Restores secure engagement if the original knob is cracked or stripped
• Helps ensure settings can be changed as intended
• Common signs include a loose, wobbly, broken, or missing knob

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying that could damage the shaft
• Align the new knob with the keyed/flat side of the shaft and press on firmly
• If your model uses a set screw, align the knob and tighten it before testing operation

The Grommet is an OEM part for Whirlpool gas cooktops. It forms a protective barrier and seal where wiring or mounting bolts pass through ventilation cutouts.

Causes of a bad grommet typically include degradation of the rubber material over time due to heat exposure during cooking. Physical stress from repeated installation/removal can also crack or loosen the seal.

Symptoms of a bad grommet include:

• Air leaks appearing around wiring/bolt openings  
• Drafts disturbing burner or element temperatures
• Noise from loose fixtures rattling 
• Risk of sparks near exposed connections

Replacing with an OEM grommet restores the protective seal while blending seamlessly with range aesthetics. Compatible brands include KitchenAid, Jenn-Air, and select Kenmore cooktop models. 

This white control knob replaces a worn or missing knob so you can smoothly select settings on your appliance again. It restores dependable turning feel and a clean, like-new appearance on the control panel.

• Attaches to the control shaft so you can select levels or functions
• Common fix for cracked, stripped, loose, or missing knobs
• Helps when the knob spins freely or is hard to turn
• Maintains clear alignment with the panel's indicator marks

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the shaft
• Align the new knob with the flat or splined shaft and press on until fully seated
• Verify smooth movement from OFF through all settings

Color: Black

This replacement knob controls the AccuSimmer surface burner on select ranges/cooktops. It restores smooth, accurate setting selection—including delicate simmer—when the original knob is cracked, stripped, loose, or missing.

• Provides user control to turn the burner on/off and set heat levels, including low AccuSimmer settings
• Common symptoms: cracked or missing knob, loose or free-spinning fit, or worn markings that make settings hard to read
• Helps restore proper feel, alignment, and readability at the burner control
• Note: A damaged or deformed valve stem will prevent proper operation even with a new knob

• Disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; align the new knob with the stem and press straight on until fully seated
• Ensure both the valve and the new knob are set to Off before installation
• Do not force; if resistance is excessive, inspect the valve stem for damage

Color: White simmer knob

Color: White

This white replacement control knob restores a secure grip and clear setting indicator on an appliance control panel. It lets you select temperatures, cycles, or functions accurately when the original knob is cracked, loose, or missing. What it does:

• Fits onto the control shaft to rotate and select settings on the appliance control panel.
• Provides a visible indicator to line up the desired temperature, cycle, or function.
• Replaces knobs that are cracked, stripped, loose, missing, or no longer engaging properly.
• Simple cosmetic and functional replacement to restore user control without replacing the entire control assembly.

• Disconnect power to the appliance before performing any service.
• Pull the old knob straight off the control shaft; press the replacement knob onto the shaft, aligning the indicator to the selected setting.
• If the knob does not pull off or push on easily, check for a retaining clip or set screw.

This is the black control knob that mounts on your range or cooktop's control shaft, letting you select heat levels and settings with a clear, factory look. Replacing a worn knob restores proper grip and accurate pointer alignment.

• Mounts on the control shaft to select burner or function settings
• Restores smooth turning and positive indexing
• Ideal replacement for cracked, stripped, loose, or missing knobs
• Helps ensure settings are clearly indicated and easy to adjust

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the new knob with the shaft and press firmly until fully seated
• After installation, verify smooth operation and correct pointer alignment

Color: Black

This control knob is the user interface dial that lets you select settings on compatible appliances. It restores a secure grip and clear position indication for reliable operation during normal use. What it does:

• Replaces a worn, cracked, or missing control knob so you can change settings easily
• Provides a tactile grip and visible pointer for accurate selection of cycles or temperatures
• Fits onto the appliance control shaft and engages the selector mechanism for normal function
• Helps eliminate slipping or loose knob movement that can make controls hard to set

• Slide the knob straight onto the control shaft until fully seated; no tools typically required
• If the old knob is stuck, gently pull straight out while wiggling to avoid damaging the shaft
• Disconnect power before working near energized controls and follow all safety warnings in your manual
• If the knob does not seat properly, double-check shaft style and part compatibility before forcing

Replacement bezel that fits around a control knob to restore a clean appearance and secure knob fit. Helps reduce knob wobble and protects the control shaft from dirt and spills for reliable knob operation. What it does:

• Covers the control shaft and provides a finished look to the knob area.
• Restores a snug, centered fit when the original bezel is cracked, worn, or missing.
• Reduces knob wobble and play that can affect control feel.
• Helps keep debris and liquids away from the control shaft to prevent interference.

• Disconnect power (unplug appliance or shut off circuit) before removing or replacing knobs.
• Remove the control knob, then pry or unclip the old bezel from the panel; install new bezel by aligning and snapping into place.
• Inspect for broken clips or mounting points; replace any damaged fasteners to ensure a secure fit.

The Knob is an OEM part for Whirlpool electric ranges. It provides a comfortable grip and smooth rotation, allowing you to accurately adjust the heat levels for your cooking needs.

A bad knob can occur due to various reasons, such as regular wear and tear, accidental damage, or exposure to high heat. If you notice symptoms such as a loose or wobbly knob, difficulty in turning or adjusting the temperature, or a cracked or broken knob, it may be time to replace it.

Symptoms of a bad electric range knob include:

• Loose or wobbly knob
• Difficulty in turning or adjusting the temperature
• Cracked or broken knob

Restore the function and appearance of your Whirlpool electric range by replacing the worn-out or damaged knob with this genuine OEM part.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Black Control Knob is an OEM part for Whirlpool gas and electric ranges. 

Causes of a bad control knob are often due to wear and tear over time making it difficult to turn accurately or stay securely in position. Excessive heat exposure can also damage knob labeling.

Symptoms of a bad control knob include: 

• Difficulty selecting desired burner settings or oven modes
• Loose fit that causes unintentional changes 
• Faded or illegible markings for burner/oven identification
• Cracked or broken knob base attachment area

This genuine Whirlpool replacement knob is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and Kenmore range models.

This control knob replaces a damaged or missing knob on your range or cooktop. It mounts on the control shaft so you can select burner settings with a secure, accurate feel, finished in white to match the original. What it does:

• Provides hand control for burner/temperature selection by turning the valve or switch shaft
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores smooth rotation and proper alignment of settings
• Color: White to match original finish

• 1 control knob

• Disconnect power and shut off gas supply before servicing
• Pull the old knob straight off the shaft; avoid prying or twisting sideways
• Align the new knob with the shaft and press straight on until fully seated
• Do not force; if the underlying valve/switch is damaged or binding, address that issue before installing the new knob

Color: White. Other colors: For black use WP9750372FF, for biscuit use WP9750372FC.