Whirlpool Microwave Parts

This thermostat temperature limiter helps regulate oven temperature and prevents overheating by signaling the control when set limits are reached. It replaces a faulty limiter to restore proper temperature control and safer operation. What it does

• Acts as a temperature-sensitive switch that opens or closes at a set temperature to limit heat.
• Prevents the oven from exceeding safe temperatures by cutting power to the heating circuit when triggered.
• Commonly used when the oven won't reach or maintain set temperatures, or when it overheats and shuts down.
• Works as a safety/limit device in the appliance's temperature control system.

• One thermostat temperature limiter

• Disconnect power at the breaker or unplug the appliance before servicing.
• Handle terminals carefully and secure wiring to original connections; avoid bending or stressing the sensor.

This outer door panel restores the refrigerator's exterior after dents, scratches, or corrosion, giving the appliance a clean finished look and protecting internal components. It's the factory-style replacement panel used on select Whirlpool refrigerators. What it does:

• Replaces a dented, scratched, or rusted outer door surface to improve appearance
• Protects internal door components and insulation from exposure
• Restores a straight mounting surface for handles, trim, and hinges
• Helps maintain proper door alignment and sealing when reinstalled correctly

• One outer door panel

• Disconnect power to the appliance and empty the door before starting
• Some handles, trim pieces, hinges, and fasteners may need to be transferred from the old panel
• Use a second person for safe handling and alignment — panels are bulky and can be awkward to position
• Follow OEM instructions for reassembly and torque of hinge fasteners

This coupler connects the motor to the transmission to transfer drive force, restoring reliable agitation or spin. It's a direct-fit replacement that helps stop slipping and irregular spin caused by a worn or broken coupler. What it does:

• Couples the motor shaft to the transmission/driveshaft so the washer can agitate and spin
• Transfers torque from the motor to the transmission for normal cycle operation
• Worn or failed couplers can cause loud grinding, clunking, or loss of agitation/spin
• Replacing a damaged coupler eliminates slippage and restores proper drivetrain function

• One coupler

• Disconnect power and water before beginning any repair
• Installation may require removal of cabinet or access panels; follow OEM instructions
• Inspect adjacent components (motor mounts, transmission, clutch) while replacing the coupler

This propeller is the small impeller that mounts to the dishwasher circulation pump to move wash water through the spray arms for effective cleaning. Replacing a worn or damaged propeller restores proper water flow and wash performance. What it does:

• Spins on the pump shaft to circulate wash water through the spray arms
• Restores normal water flow when a cracked or stripped propeller reduces circulation
• Helps resolve symptoms such as poor cleaning, weak spray, or inconsistent water movement
• Works with the pump motor; does not include the motor or pump housing

• Disconnect power and water supply before beginning any repair
• Access the pump assembly from the dishwasher base or cabinet front per your model service instructions
• Inspect the pump shaft and seal for wear; replace damaged components to prevent repeat failure
• Reassemble carefully and test operation

The Microwave Control Panel is an essential component for restoring your Samsung microwave's functionality. This genuine OEM part ensures precise operation and seamless integration with your appliance. Designed specifically for Samsung microwave models, it guarantees compatibility and a secure fit. The control panel features intuitive buttons and a clear display, making it easy to navigate settings and cooking options. Its durable construction withstands daily use, providing long-lasting performance. Replacing a faulty control panel with this genuine OEM part helps maintain the efficiency and reliability of your microwave. Installation is straightforward, allowing you to quickly resume your cooking tasks without hassle. Enhance your microwaveGÇÖs performance and enjoy consistent results with the Microwave Control Panel . Trust in a quality part that meets SamsungGÇÖs standards, ensuring your kitchen appliance operates smoothly and effectively for years to come.

A replacement plate used to secure or cover internal components and restore proper fit and protection for your appliance. This stamped metal plate helps keep parts aligned and shields wiring and openings from debris. What it does

• Secures or anchors nearby components to maintain correct alignment and operation
• Covers openings or service areas to protect wiring and insulation from debris
• Helps reduce vibration or rattling by providing a stable mounting surface
• Restores the original enclosure fit and appearance after part removal or repair

• One replacement plate as shown

• Disconnect power to the appliance before beginning any repair
• Installation requires basic hand tools; avoid overtightening fasteners
• Follow OEM instructions for correct placement
• If you encounter damaged fasteners, wiring, or mounting points, address those issues before completing installation

This white microwave door replaces a damaged or worn outer door assembly to restore appearance and safe operation. It provides the exterior panel and handle mounting surface for a finished cabinet look. What it does:

• Replaces a cracked, dented or discolored outer microwave door panel
• Restores the cosmetic finish and proper door closure alignment
• Helps maintain the microwave's protective barrier during operation
• Works when the original door shell, trim or latch-mount area is damaged

• High-level replacement: remove microwave trim/outer screws and transfer any latch or trim pieces as required
• Handle and internal latch components may need to be transferred from the old door
• Disconnect power to the appliance before any service and follow OEM safety instructions

This mounting bracket is a replacement support bracket that secures appliance panels and components, restoring proper alignment and stability so doors, panels, or internal assemblies fit and operate correctly. What it does

• Provides stable support for cabinet panels or internal components to prevent sagging or misalignment
• Restores correct panel or door alignment that can reduce rubbing, catching, or vibration noise
• Replaces cracked, bent, or missing brackets that can cause loose panels or uneven gaps
• Works where a small stamped/formed metal bracket is used to attach or support assemblies

• Disconnect power (and water, if applicable) before starting any repair
• Use basic hand tools; bracket typically fastens with screws or bolts — keep original fasteners if reusable
• Support panels while removing/installing the bracket to avoid dropped parts or pinched wiring

Color: Black

This is a replacement screw used to secure appliance parts and panels. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Secures panels, brackets, or components in place to maintain appliance alignment
• Replaces lost, damaged, or rusted fasteners for a reliable hold
• Helps prevent rattling or movement caused by a missing screw
• Works wherever the OEM screw specification and fit match

• One screw

• Use the matching screwdriver or driver bit; avoid overtightening to prevent stripping
• Disconnect power and follow appliance safety precautions before servicing

This fuse holder secures and connects a replaceable inline fuse to the appliance's electrical circuit, restoring overcurrent protection and helping prevent damage from short circuits or power surges. What it does:

• Holds and connects a replaceable fuse in the appliance's electrical circuit
• Completes the fuse's electrical connection so current flows through the protective element
• Replaces a cracked, burnt, or loose holder that causes intermittent power or blown fuses
• Helps restore proper overcurrent protection when the fuse itself is intact

• Disconnect power to the appliance before inspecting or replacing electrical parts.
• Inspect nearby wiring and connectors; replace any damaged components to ensure a secure connection.

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This air deflector redirects airflow inside the appliance to help channel heated or cooled air where it's needed for proper operation. It's a simple replacement that restores intended air pathing and performance. What it does:

• Directs internal airflow to improve circulation and temperature consistency
• Prevents air from blowing directly on sensitive components
• Helps reduce uneven cooking/cooling symptoms and localized hot or cold spots
• Can eliminate abnormal airflow noise caused by misdirected vents

• One air deflector

• Disconnect power (and gas if applicable) before servicing
• Access may require removing exterior or interior panels; keep track of screws and fasteners
• Replace with the correct orientation so air passages align with vents