Whirlpool Refrigerator Gasket & Seal

This rear icebox gasket seals the freezer/icebox compartment to help maintain proper temperature and reduce frost buildup. It restores the door seal so the appliance runs more efficiently and prevents moisture intrusion. What it does:

• Seals the icebox/freezer compartment to keep cold air in and warm, humid air out
• Helps prevent frost and ice buildup inside the icebox
• Reduces temperature fluctuations that can cause food spoilage
• Can stop condensation or water pooling caused by a failing door seal

• Unplug the appliance before attempting replacement
• Remove the old gasket fully and clean the mounting channel before installing the new seal
• Press the new gasket into the channel evenly; allow time for the gasket to form to the door

The Door Gasket is an OEM part for Whirlpool refrigerators. This gasket provides a seal between the freezer door and the main cabinet, ensuring a tight closure and preventing cold air from escaping. It is made of high-quality materials that provide a reliable barrier against temperature fluctuations and help maintain cooling efficiency.

A bad freezer door gasket can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as frost buildup inside the freezer, decreased cooling performance, or a loose-fitting freezer door, it may be time to replace the  the worn-out or damaged freezer door gasket with this genuine OEM part.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• Decreased cooling performance
• A loose-fitting freezer door

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Door Gasket is an OEM part for Whirlpool refrigerators. It creates an essential seal around the refrigerator door, helping to maintain cool interior temperatures and energy efficiency.

Causes of a bad door gasket can include cracks, tears, or compressions from repeated closing of the door over many years of use. Exposure to heat or sharp objects may also damage the sealing material.  

Symptoms of a bad door gasket include: 

• Ineffective sealing allowing warm air into the refrigerator 
• Increased cooling requirement from the compressor to maintain temperatures
• Frost or moisture buildup around the door seal
• Gaps are visible along the door frame where the gasket makes contact

Color: Grey 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement door gasket creates an airtight seal around the refrigerator door to help keep cold air in and reduce frost buildup. It restores proper sealing to improve cooling consistency and energy efficiency. What it does:

• Seals the door edge to prevent cold air loss and reduce moisture/frost inside the cabinet
• Helps the compressor run less frequently by maintaining a stable internal temperature
• Commonly used when the existing gasket is torn, stretched, flattened, or no longer seals evenly
• Reduces warm spots and food spoilage that can result from a failing door seal

• Clean the door surface and gasket mounting channel before installing to ensure a tight seal
• Align the gasket evenly around the door and press into the channel; warm the gasket with a hair dryer if needed to ease installation (low heat only)
• Check door closing and seal after installation; avoid using sharp tools that can damage the gasket

Color: White

The door gasket is an OEM part for Whirlpool refrigerators. It forms a seal between the refrigerator door and body, working to ensure peak cooling and energy efficiency. This rubber gasket acts as insulation, preventing warm air from entering the refrigerator compartment each time the door is opened.

Causes of a bad door gasket can include cracks, tears, or compression from repeatedly opening and closing the refrigerator door over an extended period of time.

Symptoms of a bad door gasket include:

• Inefficient cooling and higher energy costs
• Warm air leaking into the refrigerator
• Moisture buildup or frost inside the body
• Difficulty properly sealing the door shut

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This door gasket creates a tight seal around the refrigerator door to keep cold air in and humid room air out. Replacing a worn gasket helps maintain proper temperatures and reduces condensation and frost at the door opening. What it does:

• Seals the door perimeter to limit warm air infiltration
• Helps keep interior temperatures stable for consistent cooling
• Reduces moisture and frost buildup near the door opening
• Replaces a gasket that is torn, warped, brittle, or won't seal properly

• 1 door gasket

• Disconnect power before servicing
• Remove the old gasket from the retaining channel; on some models, loosen retainer screws to release it
• Warm the new gasket in hot water or with low heat to relax folds; seat corners first, then press fully into the channel all around
• Close the door to check for even contact; adjust door alignment if needed and allow up to 24 hours for the gasket to conform

This refrigerator door gasket forms an airtight seal between the door and cabinet. Replacing a worn seal helps stop warm air leaks, reduce frost and condensation, and keep temperatures stable for better efficiency and food preservation.

• Creates a continuous perimeter seal between the door and cabinet to prevent air infiltration
• Helps maintain correct temperatures and reduce moisture/frost buildup
• Restores proper door closing when the old gasket is torn, warped, or permanently compressed
• Common symptoms: door not sealing or popping open, condensation around the door, temperature swings, frost along the door edges

What's included: 1 door gasket Installation notes:

• Disconnect power before servicing
• Let the new gasket relax at room temperature or warm it in water to remove kinks
• Pull the old gasket from the door channel; clean the mating surface
• Seat corners first, then press the gasket fully into the channel; use gentle low heat to smooth waves if needed

The Door Gasket is an OEM part for Whirlpool refrigerators. It forms an insulating perimeter around the refrigerator door opening to maintain cool interior temperatures during use.

Causes relate to the breakdown of sealing materials from repeated compression cycles over many years. Cracks or loose areas compromise the barrier.

Symptoms of a defective door gasket can include:

• Warm air entering around the door edges
• Interior humidity increases causing frost or condensation
• Higher electric bills from lost cooling efficiency
• Inability to maintain set temperatures over long periods

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: Color - Grey

This replacement gasket seals the appliance door to help maintain proper temperature and prevent leaks, keeping the interior efficient and protected. Use it to restore a tight door seal and reduce energy loss from gaps. What it does:

• Forms a secure seal around the door to keep heat or cold inside the appliance
• Prevents water, steam, and air leaks that can cause poor performance or messes
• Helps maintain consistent internal temperature for efficient operation
• Reduces cycling and energy waste caused by a damaged or worn seal

• One replacement gasket

• Disconnect power and empty the appliance before starting any repair
• Inspect the door frame and mounting channel for damage or debris before installing
• Install by seating gasket evenly into the channel or following the OEM mounting clips/adhesive method

The Freezer Door Gasket is an OEM replacement part for Whirlpool bottom-mount refrigerators. This white freezer door gasket is responsible for maintaining a tight air seal around the entrance to the freezing compartment. It helps retain cold air inside and prevents warm drafts or humidity from affecting food freshness and freezer efficiency. 

Symptoms of a bad freezer gasket include: 

• Difficulty keeping consistent temperatures inside the freezer section
• Visible moisture, frost, or condensation around the door perimeter
• Noticeable warm air infiltration reducing cooling performance

Causes of freezer gasket failure involve regular opening and closing of the door. Over time, the flexible material breaks down from continuous use exposing it to changing environmental temperatures. Physical damage from overstuffing shelves or slamming the door can also prematurely damage the gasket.

This OEM replacement is also compatible with some KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

This is the rear crisper seal that fits along the back edge of the refrigerator crisper compartment to help maintain the crisper enclosure and reduce air leakage. It restores a tighter seal for better humidity control and food storage. What it does:

• Replaces a worn or torn rear crisper gasket to help reduce cold air loss from the crisper area
• Helps maintain crisper humidity so produce stays fresher longer
• Prevents gaps that can cause uneven cooling or frost build-up near the drawer
• Can reduce draft noise or rubbing caused by a damaged seal

• One rear crisper seal (matches OEM part number)

• Remove the crisper drawer to access the rear seal before replacing
• Peel out the old seal and press the new seal firmly into the gasket channel; ensure an even, continuous fit
• Avoid using sharp tools that could damage the cabinet or new seal
• Unplug the refrigerator or switch off power if needed for safe access to nearby components

This pan gasket seals the refrigerator's drain/drip pan to help channel condensate and prevent water from leaking under the appliance. Replacing a worn gasket restores proper drainage and reduces puddling. What it does

• Seals the evaporator/drip pan to keep condensate contained and routed to the drain.
• Helps prevent water from collecting beneath or around the refrigerator.
• Commonly replaced when you see water on the floor, persistent puddles, or poor drainage.
• Works with the existing drain pan and support components to maintain correct drainage.

• One pan gasket

• Always unplug the appliance or disconnect power before starting work.
• Remove necessary access panels and the drip pan to access the gasket; handle panels and clips gently.
• Clean the pan and sealing surfaces before installing the new gasket to ensure a tight fit.
• If the pan is cracked or damaged, replace it too—gasket replacement alone won't stop leaks from a broken pan.