Whirlpool Refrigerator Gasket & Seal

Ordered new gasket seals and had someone install them, Installed one prior myself and it was very difficult to heat and stretch and wrap doors. Ended up gouging my cabinet when stretching the seal . Leave for professionals and even they struggled. Tight now and working great. Read more

A tree had fallen across our power lines and the resulting power surge fried the circuit board. The diagnosis was a bit difficult and involved an educated guess based on how the frig was acting. The display was dark unless a button was pressed and the inside light worked but that was all. I had to rule out the compressor as the root cause so I back fed power to the compressor and heard it and the condenser fan fire up. I ordered the board and found the only way I could get it overnight was to... Read more

I pulled the old gasket off the door then I used rubbing alcohol to clean the mold along the back of the door and in the insert for the gasket seals . The new gasket fit extremely well and was very easy to put in. I waited 24 hours for the gasket to come back to its normal shape. After putting the gasket in I waited another 24 hours to make sure that I was getting no Icing inside the freezer area. There was no icing so the job is completed. Read more

Replaced gasket. Read more

Refrigerator door gasket. I ordered one gasket from you guys, it was so easy to replace. Everything is working fine Read more

Located appropriately sized door gaskets. Read more

I tried unsuccessfully to find the model numbers for these two appliances until I called your company and your representative found them immediately and sent me the parts I think that the same day or the next day. Instructions were clear and easy and I installed them within moments, neither one was any trouble. Read more

Took me 5 minutes to replace the gasket. No tools required. That’s cheap labor. Read more

Replaced door seal as per video from your resources. went very well no problems Read more

I replaced the freezer door seal. Read more

I replaced the gasket Read more

Instructions are very dumb, but it's an easy fix. Loosen all the nuts that hold the metal bars that hold the old gasket. (Loosen. Don't take them off!) Pull off the old gasket. Slip the new into place all the way around. Get the corners in position, middles can be loose. Tighten the corners, then work the middles into place and tighten as you go. Done. Read more