Whirlpool Refrigerator Gasket & Seal

This replacement door gasket creates an airtight seal around the refrigerator door to help keep cold air in and reduce frost buildup. It restores proper sealing to improve cooling consistency and energy efficiency. What it does:

• Seals the door edge to prevent cold air loss and reduce moisture/frost inside the cabinet
• Helps the compressor run less frequently by maintaining a stable internal temperature
• Commonly used when the existing gasket is torn, stretched, flattened, or no longer seals evenly
• Reduces warm spots and food spoilage that can result from a failing door seal

• Clean the door surface and gasket mounting channel before installing to ensure a tight seal
• Align the gasket evenly around the door and press into the channel; warm the gasket with a hair dryer if needed to ease installation (low heat only)
• Check door closing and seal after installation; avoid using sharp tools that can damage the gasket

Color: White

The door gasket is an OEM part for Whirlpool refrigerators. It forms a seal between the refrigerator door and body, working to ensure peak cooling and energy efficiency. This rubber gasket acts as insulation, preventing warm air from entering the refrigerator compartment each time the door is opened.

Causes of a bad door gasket can include cracks, tears, or compression from repeatedly opening and closing the refrigerator door over an extended period of time.

Symptoms of a bad door gasket include:

• Inefficient cooling and higher energy costs
• Warm air leaking into the refrigerator
• Moisture buildup or frost inside the body
• Difficulty properly sealing the door shut

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This door gasket creates a tight seal around the refrigerator door to keep cold air in and humid room air out. Replacing a worn gasket helps maintain proper temperatures and reduces condensation and frost at the door opening. What it does:

• Seals the door perimeter to limit warm air infiltration
• Helps keep interior temperatures stable for consistent cooling
• Reduces moisture and frost buildup near the door opening
• Replaces a gasket that is torn, warped, brittle, or won't seal properly

• 1 door gasket

• Disconnect power before servicing
• Remove the old gasket from the retaining channel; on some models, loosen retainer screws to release it
• Warm the new gasket in hot water or with low heat to relax folds; seat corners first, then press fully into the channel all around
• Close the door to check for even contact; adjust door alignment if needed and allow up to 24 hours for the gasket to conform

This refrigerator door gasket forms an airtight seal between the door and cabinet. Replacing a worn seal helps stop warm air leaks, reduce frost and condensation, and keep temperatures stable for better efficiency and food preservation.

• Creates a continuous perimeter seal between the door and cabinet to prevent air infiltration
• Helps maintain correct temperatures and reduce moisture/frost buildup
• Restores proper door closing when the old gasket is torn, warped, or permanently compressed
• Common symptoms: door not sealing or popping open, condensation around the door, temperature swings, frost along the door edges

What's included: 1 door gasket Installation notes:

• Disconnect power before servicing
• Let the new gasket relax at room temperature or warm it in water to remove kinks
• Pull the old gasket from the door channel; clean the mating surface
• Seat corners first, then press the gasket fully into the channel; use gentle low heat to smooth waves if needed

The Fip Gasket is an OEM part compatible with Whirlpool refrigerators. Located around the refrigerator door opening, the fip gasket forms an air seal when the door is closed. 

Causes of a bad fip gasket can include tears, cracks or compression issues from years of door opening/closing cycles. Mineral or food residue buildup can also cause sealing problems.

Symptoms of a bad fip gasket include: 

• Fluctuating interior temperatures  
• Higher energy costs due to inefficient sealing
• Condensation or frost buildup around the door 
• Warm or cool air detected entering around the door seal
• The door not sealing closed properly

This OEM Whirlpool replacement fip gasket is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore refrigerators. 

The Door Gasket is an OEM part for Whirlpool refrigerators. It forms an insulating perimeter around the refrigerator door opening to maintain cool interior temperatures during use.

Causes relate to the breakdown of sealing materials from repeated compression cycles over many years. Cracks or loose areas compromise the barrier.

Symptoms of a defective door gasket can include:

• Warm air entering around the door edges
• Interior humidity increases causing frost or condensation
• Higher electric bills from lost cooling efficiency
• Inability to maintain set temperatures over long periods

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: Color - Grey

Color: Grey

The Freezer Door Gasket is an OEM part for Whirlpool refrigerators. It forms an air tight perimeter around the freezer door opening to prevent moisture and air seepage into frozen items.

Causes of failure can include cracking or separation of the adhesive backing from the door flange over repeated use. General deterioration is also common from exposure to temperature extremes.

Symptoms of a defective freezer door gasket include:

• Frost or condensation build up inside the freezer
• Higher energy bills from lost insulation
• Inability to maintain below freezing temperatures
• Faster ice cube melting or frost patterns on packages

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement gasket seals the appliance door to help maintain proper temperature and prevent leaks, keeping the interior efficient and protected. Use it to restore a tight door seal and reduce energy loss from gaps. What it does:

• Forms a secure seal around the door to keep heat or cold inside the appliance
• Prevents water, steam, and air leaks that can cause poor performance or messes
• Helps maintain consistent internal temperature for efficient operation
• Reduces cycling and energy waste caused by a damaged or worn seal

• One replacement gasket

• Disconnect power and empty the appliance before starting any repair
• Inspect the door frame and mounting channel for damage or debris before installing
• Install by seating gasket evenly into the channel or following the OEM mounting clips/adhesive method

This is the rear crisper seal that fits along the back edge of the refrigerator crisper compartment to help maintain the crisper enclosure and reduce air leakage. It restores a tighter seal for better humidity control and food storage. What it does:

• Replaces a worn or torn rear crisper gasket to help reduce cold air loss from the crisper area
• Helps maintain crisper humidity so produce stays fresher longer
• Prevents gaps that can cause uneven cooling or frost build-up near the drawer
• Can reduce draft noise or rubbing caused by a damaged seal

• One rear crisper seal (matches OEM part number)

• Remove the crisper drawer to access the rear seal before replacing
• Peel out the old seal and press the new seal firmly into the gasket channel; ensure an even, continuous fit
• Avoid using sharp tools that could damage the cabinet or new seal
• Unplug the refrigerator or switch off power if needed for safe access to nearby components

Replace a worn or torn refrigerator door gasket to restore a tight seal and help maintain proper cooling. This exact-service door gasket in Apollo Gray fits the door edge and compresses to keep cold air in and warm air out. What it does:

• Seals the refrigerator/freezer door to help maintain internal temperature and energy efficiency.
• Prevents warm, humid air from entering and forming frost or condensation inside the compartment.
• Helps eliminate drafty edges, clicking door behavior, and uneven cooling near the door.
• Restores proper door closure when the original gasket is cracked, flattened, or damaged.

• High-level replacement: remove the old gasket, align the new gasket in the door channel, and press into place; follow factory warm-water or heat-stretch procedures if required by the OEM.
• Inspect the door flange and mounting channel for damage or debris before installing the new gasket.
• For best seal, allow gasket to settle for 24 hours and check for gaps; use care when heating or stretching to avoid distortion.
• Disconnect power only if instructed by the appliance manufacturer for your specific model.