Whirlpool Wall Oven Knob, Dial & Button

The Knob Bezel is an OEM part for Whirlpool ranges. As a decorative cosmetic component, the knob bezel surrounds the temperature and function knobs on the oven control panel. It helps protect the knobs while enhancing the aesthetic appeal of the appliance.

Causes of a bad knob bezel include wear and tears such as scratches, dings, or cracks over time from normal use. Exposure to heat and cooking residue can also cause discoloration or warping of the bezel material.

Symptoms of a bad knob bezel include:

• An outdated or worn out appearance on the oven control panel
• Exposure of the internal knobs without cosmetic protection
• Potential interference with knob functionality from tears or cracks

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: This is a kit of 5 bezels.

This control knob replaces a damaged or missing knob on your appliance, restoring a clean look and smooth, accurate selection of settings. It lets you turn the control shaft confidently for everyday, reliable operation.

• Presses onto the control shaft to operate the switch or valve
• Allows you to adjust settings such as heat, temperature, or function
• Common symptoms include cracking, stripped insert, loose/wobbly fit, or the knob not gripping the shaft
• A worn knob can make the control hard to turn or prevent it from turning on/off

• Pull the old knob straight off; avoid prying or side pressure to prevent stem damage
• Align the knob with the shaft orientation (flat/D-shaped as applicable) and press straight on until fully seated
• Confirm the indicator aligns with Off after installation
• Disconnect power and/or shut off gas; verify model-specific fit before installation

The Knob is an OEM part for Whirlpool ranges. It is responsible for controlling oven functions through its precise movements and settings. 

Causes of a bad knob can include wear and tear over time resulting in loosening or difficult turning. Paint fading or peeling on the knob is also common. 

Symptoms of a bad knob include:

• Functions not activating when turned 
• Loose or wobbly movement when adjusting temperature or settings
• Faded, chipped, or peeling paint
• The knob coming off entirely 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: White

The Burner Knob is an OEM part for Whirlpool ranges and cooktops. This knob allows users to control the intensity of the stove's burner, offering a seamless interface for adjusting from a gentle simmer to a rolling boil. 

Over time, burner knobs can wear out or become damaged due to frequent use, exposure to heat, or accidental impacts. 

Symptoms of a bad Burner Knob include:

• Difficulty in adjusting the burner's flame or heat level
• The knob is loose or does not turn smoothly
• Visible cracks or damage to the knob
• The knob does not align properly with the burner settings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This control knob lets you select settings on your appliance. Replacing a worn or missing knob restores smooth, reliable control and a finished look to the front panel. What it does:

• Attaches to the control shaft to adjust appliance settings
• Restores positive engagement when the original knob is cracked or stripped
• Helps ensure accurate, repeatable adjustments
• Common symptoms: knob broken, loose, missing, or spins without turning the control

• Includes 1 control knob

• Disconnect power and shut off gas before servicing
• Pull the old knob straight off the shaft; avoid prying on the control panel
• Align the new knob's hub with the shaft and press firmly until fully seated
• Verify smooth rotation and proper engagement before returning the appliance to service

This replacement control knob restores smooth, reliable selection of your appliance's settings. Installing this part helps you accurately choose cycles, temperatures, or burner levels again.

• Attaches to the control shaft to operate a switch, valve, or timer
• Provides clear position indexing for accurate setting selection
• Typical symptoms: loose or wobbly knob, slips, won't turn the control, or falls off
• Replacing a damaged knob can resolve difficulty selecting cycles, temperatures, or burner output

• Disconnect power before servicing; if working on a gas range, also shut off the gas supply as needed
• Pull the old knob straight off the shaft—do not pry against the control panel
• Align the new knob with the shaft orientation and press straight on until fully seated
• Verify operation by rotating through all positions

Color: chrome. Measures about 1 inch in diameter.

Color: Black. Measures about 2 inches in diameter. For biscuit use WP98008208. For white use WP98006102. Sold individually.

Color: Black   power burner knob

Color: Black   simmer knob.

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. It restores a secure fit on the control stem and smooth turning for accurate adjustments.

• Interfaces with the control stem to set temperatures, cycles, or power levels
• Replaces cracked, stripped, loose, or missing knobs that wobble or won't stay on
• Helps restore smooth turning and a firm, accurate feel
• Common symptoms: knob broken, spins freely, hard to turn, or falls off

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control stem; avoid prying sideways
• Align the new knob with the stem shape and press until fully seated; if your design uses a set screw, tighten gently
• If the knob won't fit or stay on, inspect the control stem for damage

Color: Black

Color: White. Measures about 2 inches in diameter.

LF, LR, RR Black