Whirlpool Wall Oven Knob, Dial & Button

Color: White. For biscuit use WP8522567, for black use WP8522566.

RF Black

Color: Black

The Surface Element Knob is an OEM part compatible with Whirlpool ranges. It is designed to provide a secure and convenient grip for controlling the surface elements on your range.  

A bad surface element knob can occur due to regular use, accidental damage, or wear and tear. If you notice issues such as a loose or broken knob, difficulty in turning or adjusting the surface element, or the knob not staying securely in place, it may indicate a problem with the surface element knob.

Symptoms of a bad surface element knob include:

• Difficulty in turning or adjusting the surface element
• Loose or wobbly knob
• Inability to control the temperature of the element

Replace your faulty surface element knob with this genuine OEM part to restore your range.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This control knob replaces a worn or missing knob on your range or cooktop, allowing you to select heat and function settings smoothly again. Restore precise control and a clean, finished look with a direct-fit replacement.

• Attaches to the control shaft of a valve or switch to select burner/heat settings
• Restores smooth, positive engagement if the old knob is cracked, stripped, or loose
• Helps resolve issues like slipping, wobbling, or difficulty turning settings
• Ideal when the original knob is missing or its markings are no longer readable

• Disconnect power at the breaker and shut off gas before servicing
• Pull the old knob straight off; avoid prying against the control panel
• Align the new knob with the stem orientation (set stem to Off if keyed) and press on firmly
• Verify smooth operation through all settings after installation

Color: Black. Measures about 2 inches in diameter. Other colors: For white use WP9750372FW, for biscuit use WP9750372FC.

This control knob lets you set a burner's heat level on many gas cooktops/ranges. A worn or broken knob can make temperature adjustments difficult or impossible—replacing it restores smooth, accurate control.

• Turns the surface burner valve stem to adjust flame/heat
• Common failure signs: cracks, stripped insert, knob won't grip shaft, missing or hard-to-turn knob
• Cosmetic wear or discoloration on the old knob
• Restores clear pointer alignment and tactile feedback

• Disconnect power and allow burners to cool before replacing
• Pull the old knob straight off the valve stem; align the new knob's insert with the flat on the stem
• Press on firmly until fully seated—do not force or twist on misaligned

This replacement control knob restores smooth, precise control when the original becomes cracked, stripped, or missing. It attaches to the control shaft so you can select settings with a secure, positive feel. What it does:

• Attaches to the control stem to operate the switch, valve, or timer
• Lets you select cycles, temperatures, times, or burner levels
• Restores proper engagement when the old knob spins freely or won't grip the shaft
• Common symptoms: cracked or missing knob, falls off, hard to adjust, won't change settings

• 1 control knob

• Disconnect power; for gas appliances, also shut off gas before servicing
• Pull the old knob straight off the shaft—do not pry against the panel
• Align the new knob with the stem (match flat/D orientation) and press firmly until seated
• Rotate through settings to ensure smooth operation

This replacement surface burner control knob restores smooth, accurate control of your range or cooktop. Replace cracked, stripped, or missing knobs so you can reliably turn burners on/off and adjust heat to the desired setting.

• Attaches to the valve or switch shaft to power the surface burner on/off and set the heat level
• Replaces knobs that are cracked, stripped, loose, or missing
• Restores proper indexing so Off/Low/High markings align correctly
• Common symptoms include a knob that spins freely, wobbles, falls off, or won't engage the stem

• Allow all cooking surfaces to cool and turn controls off; disconnect power if servicing near internal controls
• Pull the old knob straight off the stem—avoid prying tools that could damage surrounding trim
• Align the new knob with the shaft (match the flat/D-shape) and press straight on until fully seated

Replace a worn or missing surface-burner knob with this black infinite switch control knob. It restores smooth, accurate heat selection on your range or cooktop when the original knob is cracked, stripped, loose, or missing. What it does:

• Interfaces with the surface burner's infinite switch to select OFF through Low–High heat levels
• Restores positive, secure control of the burner
• Typical symptoms: knob cracked, spins freely, falls off, or can't adjust temperature
• Helps ensure consistent response when turning the burner on/off and setting heat

• Disconnect power and allow the cooking surface to cool completely
• Pull the old knob straight off the switch shaft
• Align the new knob with the shaft and press on until fully seated; do not force
• Rotate through all settings to confirm smooth operation

The Knob is an OEM part for Whirlpool ranges and cooktops. This component is essential for controlling the settings of your appliance, such as temperature and function selection.

Causes of a bad knob can include wear and tear from frequent use, accidental impact that causes cracking or breaking, or exposure to high heat that may warp the knob.

Symptoms of a bad knob include:

• Difficulty turning the knob
• The knob feeling loose or wobbly
• Cracks or visible damage to the knob
• The knob not staying securely in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This selector switch escutcheon is the black trim plate that fits around the control knob on the console. It restores a clean, finished look and proper alignment around the switch when the original bezel is cracked, missing, or faded.

• Finishes the opening around the selector switch and protects the panel edges
• Helps the control area look clean and aligned with the knob
• Replace when the bezel is cracked, warped, missing, or discolored
• Cosmetic component; the switch itself may be faulty

• Disconnect power before servicing
• Pull the control knob straight off the switch shaft
• Release tabs or remove screws (as applicable), lift off the old escutcheon, and align/install the new one
• Reinstall the knob and restore power; verify smooth knob movement

This black control knob replaces a worn or broken knob for an electric range or cooktop infinite switch. It restores a clean look and lets you set your surface burner heat smoothly and reliably.

• Attaches to the infinite heat switch shaft to select surface burner temperature
• Replaces cracked, stripped, loose, or missing knobs that won't turn the switch properly
• Helps settings align and stay in place during use
• Common symptoms: knob slips on the shaft, falls off, hard to turn, or is missing

• Safety first: turn off power at the breaker and allow all elements to cool before work
• Pull the old knob straight off the control shaft—do not pry against the panel
• Align the new knob with the shaft orientation and press straight on until fully seated
• After installation, rotate through settings to ensure smooth operation and correct "Off" alignment

The Knob(wht) is an OEM part for Whirlpool ranges and ovens. This white knob is designed to blend seamlessly with the appliance's aesthetic while providing a durable solution for controlling the temperature and functions of your range or oven. The knob is an essential interface between the user and the appliance, ensuring precise adjustments can be made to the cooking settings.

Causes for replacement often include prolonged use leading to wear and tear, accidental damage, or exposure to heat and cleaning chemicals that can degrade the material over time.  

Symptoms of a bad Knob include:

• Difficulty in turning or adjusting the knob 
• Cracks or breaks in the knob itself 
• Fading or wear of the indicator marks 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This thermostat knob fits onto the control shaft so you can select and adjust cooking temperature. Replace a cracked or stripped knob to restore smooth operation and a clean, finished look.

• Attaches to the thermostat stem to allow manual temperature selection
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob spins without engaging or won't stay on the shaft
• Restores proper control feel and appearance

• Disconnect power to the appliance and allow surfaces to cool before service
• Pull the old knob straight off the thermostat shaft
• Align the new knob with the shaft and press straight on until fully seated; do not force
• The pointer aligns with the control markings before use

The Burner Control Knob is an OEM part for Whirlpool ranges and cooktops. This knob allows users to adjust the flame or heat level of the burners, providing precise control over cooking temperatures. It is designed to fit securely onto the control shaft and offer smooth operation for adjusting the settings.

Causes of a bad burner control knob can include physical damage such as cracks or breaks from impact, wear and tear from frequent use, or melting due to excessive heat exposure. Misalignment or loosening of the knob can also impair its functionality.

Symptoms of a bad Burner Control Knob include:

• Difficulty in turning the knob
• The knob not staying in place or feeling loose
• Cracks, chips, or visible damage on the knob
• Inconsistent or unresponsive burner adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.