Yard Machines Fastener

This genuine MTD shoulder screw is an OEM replacement for use on select MTD machines and outdoor power equipment. The shoulder screw has several applications depending on the exact model of equipment, although it is often used to hold handles in place on push mowers. These screws can become worn or get lost over time, necessitating a replacement. It's important to always use genuine OEM parts when making a replacement on outdoor power equipment. This OEM shoulder screw is manufactured to exact standards by MTD and designed to work with several machines that are manufactured by the brand, along with select models from other outdoor power brands. It is sold as an individual unit, and those who need more than one will have to purchase additional quantities. This part can generally be replaced with minimal effort and won't usually require much disassembly. Gloves should be worn for safety whenever working on outdoor equipment, and it may be a good idea to disconnect the spark plug, as well.

Shield mounting screw for lawn tractors and walk-behind mowers. Secures protective shields and covers. Replace if stripped, missing, or damaged.

Replacement spacer for chipper shredder assemblies. Maintains proper spacing between components. Order a new one if your original is missing or damaged.

Push rod guide secures and aligns the valve push rod in your engine. Replace if cracked, worn, or missing to restore proper valve train alignment.

Secures hoses to the carburetor on outdoor power equipment engines. Replace if clamp is rusted, broken, or missing to prevent fuel or air leaks.

Replacement muffler stud that secures the muffler to the engine body. Replace if loose, stripped, rusted, corroded, or missing from your equipment.

This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.

Threaded stud secures carburetor to intake manifold on lawn mower and outdoor power equipment engines. Replace if stripped, corroded, or missing.

Hex screw fastener for lawn tractors and outdoor power equipment. Secures components throughout the machine. Replace if stripped, overtightened, or missing.

Seals the fuel tank where the filter and neck meet on gas-powered equipment. Replace if worn, cracked, or missing to prevent fuel leaks and maintain seal.

Spacer component for chipper shredder hose hanger assembly. Reduces friction between mounted parts. Replace if worn, cracked, or missing for proper fit.

Replaces a worn, damaged, or missing valve spring retainer in your outdoor power equipment engine. Essential small fastener component for valve assembly.

Exhaust valve spring installs in small engines to control valve operation. Replace if spring is broken, weakened, or missing to restore proper valve function.

This is an M5 x 8 bolt used in lawn equipment and other devices. It is typically used as a fastener on the top of the machine. Over time, the bolt may loosen and fall out. If the bolt is missing, it must be replaced for the equipment to continue to operate safely and efficiently.Before beginning a replacement, allow the engine to cool completely to prevent burns and other injuries. Wear protective gloves. If there is a damaged bolt, remove it before installing the new replacement part. Install the new bolt with a wrench or the appropriate sized socket. Secure tightly to ensure it stays fit.The M5 x 8 bolt is a genuine OEM replacement part. It is sold individually. The bolt is supplied by the manufacturer and made of high-quality, durable materials. It is compatible with machines from Troy-Bilt, Yard Machines, Cub Cadet, and MTD brand equipment. The bolt is usable in a variety of engines, including those found in tillers, blowers, chippers, log splitters, and other various lawn equipment types.

This is an M8 x 55 bolt typically used in small engines and lawn equipment. Due to regular wear and tear, bolts in lawn equipment may become lost or damaged over time. If the equipment is performing poorly, or vibrating excessively, a bolt may be the issue and replacement will be required.Be sure to wear gloves when replacing an M8 x 55 bolt. Allow the motor in your equipment to cool completely before disassembly. Once cooled, a damaged or missing bolt can be replaced using an appropriately sized wrench or socket set.The M8 x 55 bolt is an authentic OEM replacement part sourced directly from the manufacturer. It is sold individually. It is made of durable, high-quality material. The M8 x 55 bolt is used in various machines, including tillers, log splitters, chippers, and other small engines. The bolt is compatible with equipment made by Troy-Bilt, Yard Machines, Cub Cadet, and MTD.