Yard Machines Gasket & Seal

Seals the cylinder head to the engine block, preventing compression and oil leaks. Replace if you notice oil seepage, overheating, or loss of power.

This silencer plate is used on a variety of outdoor lawn and garden machines to reduce the noise from the air intake. This molded plastic part sits on top of the carburetor and houses the air filter. It provides an added layer of noise muffling. Exposure to wind, rain, and heat can cause the plastic to become brittle and cracked. The silence plate should be replaced if damage is discovered during routine maintenance. A screwdriver is needed to replace the silence plate. Before working on the machine, make sure the engine is cool and remove the spark plug. Remove the air filter cover and the air filter to access the silencer plate. Remove the screws holding the plate in place. Install the new silencer plate. Tighten the screws. Install the air filter and housing cover. This silencer plate is made of durable molded plastic and is sold individually. It is a genuine OEM replacement part sourced directly from the manufacturer. This part is compatible with tillers, chippers, shredders, and small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This choke temperature control gasket is an authentic OEM replacement part sourced directly from the manufacturer for use small engines that utilize a choke. The temperature control gasket helps to create a seal inside the choke that prevents air from seeping in or out of the choke. If the gasket is worn or damaged, air and contaminants could infiltrate the choke and cause the choke to fail. The choke temperature control gasket should be inspected and replaced if it is damaged. The choke uses a mixture of fuel and air to start the engine combustion process. If the choke temperature control gasket is not fully functioning, too much air could get in, and the ratio would not be optimal for the ignition process. If the engine is rough starting or starts and dies quickly, the choke's gaskets should be inspected and replaced as needed. Wear gloves when working on the choke and ensure that the spark plug is removed to prevent accidents.This choke temperature control gasket is sold as an individual part. It is designed for use in small engines that utilize a choke manufactured by MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt.

This part is a carburetor gasket. A carburetor mixes fuel and air before delivering it to the engine. The carburetor gasket creates a seal between the carburetor and cylinder that ensures that air is where it's supposed to be.The carburetor gasket may need to be replaced if the seal is broken and it is allowing air in. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It it is sold individually. This carburetor gasket is compatible with engines, lawnmowers, log splitters, and trimmers manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This seal kit is a genuine MTD part, sold individually. This seal kit provides a variety of replacement seals for use in a log splitter.The seal kit in a log splitter might have to be ordered as a complete replacement part if one or more seals show signs of damage. If the seals in a log splitter allow external materials such as dirt, debris, pebbles, and dust to pass into the appliance or if there are frequent oil leaks stemming from the area of one or more seals, this seal kit should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This seal kit is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

Replace this carburetor-to-muffler gasket when you notice exhaust leaks or loss of engine performance. Confirm fit with your tiller model number.

Engine o-ring gasket seal prevents oil and fuel leaks. Replace when cracked, flattened, or leaking. Verify fit with your model number before ordering.

Carburetor gasket seals the insulator and carburetor connection for proper engine compression. Replace if your engine runs rough, misfires, or leaks fuel.

Seals the dipstick oil fill tube on mowers and small engines. Replace if leaking oil or cracked to prevent engine damage. Confirm fit by model.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Seals the intake valve to prevent oil leaks and maintain proper compression in small engines. Replace if you notice oil consumption or performance loss.

Intake valve seal prevents air and fuel from escaping during engine operation. Replace if you notice oil consumption or reduced performance. Verify fit with your engine model number before ordering.