Yard Machines String Trimmer Parts

The gas-powered trimmer may not seem as if it requires a complicated clutch assembly, but this is a system within a trimmer that can fail and cause problems. A trimmer uses a centrifugal clutch that features a drive shaft inside a housing. If this clutch is failing, it will impair the trimmer's performance and even allow an engine to overheat or burn out. This replacement clutch is made of durable metal and runs in Bolens, MTD, and Yard Machine trimmers. It is compatible with a long list of models. It includes the clutch drum, clutch and hardware. This is an OEM replacement part that ships as a kit and which can be installed easily using a set of pliers and a screwdriver.

This is a genuine MTD air cleaner cover that is designed for use with select models of outdoor lawn and garden engines. The air cleaner cover is designed to fit over the air cleaner and keep debris from getting into the filter and the engine. Over time and even with the best care, air filters can become clogged, dirty, and even damaged, and they should be checked during regular routine maintenance. For those who want to replace a damaged cover or housing at the same time as the cleaner filter, this part is going to do the job. A screwdriver will be needed to install the part. Be sure to allow the unit to cool and wear gloves when performing repairs.This is an OEM replacement from MTD that is manufactured to specific standards. It can be used with select trimmers from Troy-Bilt, Cub Cadet, Yard Machines, and MTD. It includes the filter cover and the two bolts that hold it in place. The air cleaner element is also included in this assembly, which is sold as an individual unit.

This cutting head holds the line that trims weeds and grass on several specific handheld gasoline trimmers. It is covered with a thick plastic cap that is bumped against the ground so that line can be released from the spool. The plastic bump head can endure an indefinite number of bumps against the ground. The cutting head not only experiences all the same bumps but also turns at 12,000 and must stop and start rapidly. As a result, after continual use, the cutting head sometimes requires replacement. There are several clues to suggest that a cutting head needs to be replaced. Most often, the bump function ceases to work or works sporadically. To replace the cutting head, press the slots in the bump housing to release the lower part of the housing. After removing the bump head, a ratchet is needed to remove the old head. Reverse the process to install the new cutting head. If a user must replace a cutting head, it is essential that it be replaced with a genuine OEM part made by Cub Cadet such as this one. This replacement cutting head is guaranteed to perfectly match the specifications of the original part it is replacing.

This genuine replacement part is a muffler assembly for use with a lawn mower. The muffler is an essential part for the safe and reliable operation of a lawn mower. A muffler can help minimize the sound of the lawn mower engine. Additionally, it can help prevent exhaust sparks from exiting the mower and igniting dry grass, leaves, or debris. It can also help improve fuel economy of the mower. The main signs that a muffler may need to be replaced are a change in operating volume, lower fuel economy, or a bad odor during operation. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench may be needed for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair. Perform repairs only in a well ventilated area.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt, and more lawn mowers. Please note: original part number 751-14429 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a metal tappet that is used with many types of lawn equipment with small motors. The tappet is a component that attaches to the push rod. Tappets take the rotating motion provided by the camshaft and transfer it into linear motion so the valves operate properly. Over time, the tappet can break or become damaged and will require replacement.When replacing a tappet, users will need a set of pliers. It's best to wear work gloves during the process and make sure the spark plug wire is disconnected. Items like the mufflers, crankcase breather, and other parts will need to be removed to access the tappet. A visual inspection of the tappets can be done by removing them from the engine to check for damage. Remove the old tappet and replace it with a new part.This tappet is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The tappet is made for use with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, Yard-Man, and MTD.