Parts for Ge CTX22DKBL: 03 - Section3 Parts

Wire shelf assembly for refrigerator freezer compartment. Replaces damaged, bent, or broken freezer shelves. Installs inside freezer section for storage.

Replaces the outer housing that supports your refrigerator's ice crusher and dispenser chute. Order a new housing if yours is cracked or broken.

Includes 12 washers.

Includes 12 retainer rings.

Replacement pivot that supports and aligns refrigerator doors or drawers. Needed when original pivot is cracked, broken, or worn, causing misalignment.

Replaces the wire actuator in your refrigerator's ice dispenser assembly. Needed when the original is bent, broken, or missing from the ice bucket.

Ice not dispensing or jamming? This ice dispenser auger blade moves ice from the bin to the chute. Installs in numbered sequence with spacers.

Fix ice dispensing issues with this refrigerator auger blade. Solves crushed ice not dispensing or jamming problems. Moderately easy DIY repair part.

Ice won't crush and gets stuck between blades? This moving dispenser blade restores crushing function. Simple DIY fix for side-by-side refrigerators.

This stationary display blade secures and positions the appliance's front display/overlay so controls and indicators stay aligned and visible. It replaces a cracked, loose, or missing display blade to restore a stable display surface. What it does:

Mounting spacer maintains proper clearance between refrigerator panels, doors, or components. Replace if cracked, broken, or missing to restore fit.

Supports and centers the ice crusher blade assembly in your refrigerator. Replace if cracked, worn, or missing to prevent blade wobble and noise.

This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.

The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.  

Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.  

Symptoms of a malfunctioning Drive Cup include:

• The ice maker fails to eject ice properly, leading to clogs or jams within the system.
• Unusual noises during the ice-making cycle, which could indicate that the drive cup is not engaging correctly with other components.
• Decreased efficiency in ice production, as the mechanism struggles to operate smoothly.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Ice dispenser not crushing ice properly or making grinding noises? This refrigerator ice crusher auger assembly connects the motor to the crushing blades.

Seals the ice bucket to prevent spills, frost buildup, and water pooling. Replace when ice shifts or water collects. Confirm fit with your model.

Includes 12 clips.

Ice won't dispense or auger motor makes no noise? This ice dispenser auger motor drives ice cubes from the bucket. DIY-friendly replacement part.

Motor wiring harness for top-mount refrigerators. Replaces damaged, frayed, or melted wire connections between the motor and control board.

Ice dispenser only making crushed ice instead of cubes? This solenoid valve kit fixes the cube/crushed ice selector. Easy DIY repair with video guide.

This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.

• Converts the solenoid's electrical a

This replacement plunger restores proper valve action in your appliance's water/ice system so the dispenser and ice maker control water flow reliably. It provides a simple, low-cost fix for valve sticking or worn internal parts. What it does

• Moves inside a water/valve assembly to open and close water flow for the dispenser or ice maker
• Helps stop continuous or unwanted water flow when functioning correctly
• Can correct symptoms like slow or no water dispensing, intermittent flow, or ice maker fill issues
• Works as an internal service part when the valve is disassembled for repair

• One plunger

• Disconnect power and shut off the water supply before starting work
• This small internal part requires valve disassembly; follow the valve manufacturer or service manual for safe removal and reassembly
• Inspect valve seals and springs during service; replace any damaged components to ensure a reliable repair

This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.

• Converts the solenoid's electrical a

This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.

• Converts the solenoid's electrical a

Mounting stirrup bracket for refrigerators. Secures internal components in place. Replace if broken, bent, cracked, or missing to restore proper support.

This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.

• Converts the solenoid's electrical a

This bucket cover assembly replaces the top cover for the refrigerator ice bin so ice stays contained and the dispenser seals properly. It helps reduce spills and limits ice exposure to air for cleaner dispensing. What it does:

• Covers and secures the top of the ice storage bin to keep ice contained
• Helps the dispenser chute seal and guides ice toward the auger or chute
• Reduces stray ice and limits exposure that can cause odor pickup or melting
• Fits into the ice bucket assembly and snaps into place for a stable cover

• One bucket cover assembly (single replacement cover)

• Disconnect power to the appliance or unplug the refrigerator before servicing
• Remove the ice bin, lift off the old cover, then align and snap the new cover into place
• Handle carefully to avoid cracking the plastic; do not force broken tabs—inspect and replace any damaged fasteners

Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.

Plastic tubing that routes water through your refrigerator's system. Replace if cracked, brittle, kinked, or leaking to restore proper flow and prevent damage.