Parts for Amana UG8091: 09 - Fr Blkhd, Air Duct, Felt Seal & Cylinder Parts

This felt seal assembly cushions and seals the dryer drum to reduce noise, protect garments, and help maintain proper drum alignment for smooth operation. Replaces worn or torn seals that can cause rubbing, scraping, or increased vibration. What it does:

• Cushions the drum edge to prevent fabric snags and wear
• Helps keep the drum properly centered to reduce scraping and noise
• Minimizes air leakage around the drum opening for efficient airflow
• Addresses common symptoms like rubbing sounds, visible felt wear, or fabric damage

• Disconnect power before starting any repairs to avoid shock or injury
• Access typically requires removing the dryer front or drum; keep fasteners organized
• Inspect adjacent drum glides and rollers; replace if worn for best results

This ground screw secures the appliance grounding conductor to the chassis for a reliable electrical ground connection, helping maintain safety and proper operation. It's a direct-fit fastener used where a dedicated ground screw is required. What it does

• Fastens the grounding conductor to the appliance frame to maintain a secure earth/ground connection.
• Helps prevent electrical shock and reduces risk of stray voltage on the chassis.
• Addresses symptoms like intermittent or absent grounding and loose or corroded ground connections.
• Used wherever the original equipment grounding screw has been lost, damaged, or corroded.

• Disconnect power at the breaker and unplug the appliance before starting any work.
• Only attach to designated grounding points on the chassis; ensure the mating surface is clean and free of paint or corrosion.
• Use the correct driver and moderate hand torque—do not overtighten to avoid stripping threads.

The Dryer Glide Felt Pad is an OEM part for Whirlpool dryers. It is located at the front of the dryer drum. It provides a smooth surface for the drum to glide on, reducing friction and allowing it to rotate freely. This helps to prevent excessive wear and noise during the drying cycle.

Causes of a faulty or damaged dryer glide felt pad can include regular wear and tear, accumulation of lint or debris, or accidental mishandling. These factors can result in issues such as squeaking or grinding noises, uneven drum rotation, or damage to the drum.

Symptoms of a bad dryer glide felt pad may include:

• Squeaking or grinding noises during operation
• Uneven drum rotation or wobbling
• Excessive wear or damage to the drum

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

A lint filter or lint trap prevents clogging of the dryer vent. When a garment is tumbling around in the dryer, the high heat combined with agitation can lead to fiber shedding. The lint filter captures the fibers and prevents them from blocking the dryer vent hose. If there is too much accumulation already, the excess fibers may not stay in the filter and could flow into the hose. Installing a brand-new lint filter can solve this problem. It can promote better energy consumption, faster drying, proper airflow, and reduced fire risk. Replacement is simple and straightforward and no tools are needed. Open the dryer and access the lint filter housing. Open the cover and slide the old filter out. Insert the replacement. This SpeedQueen 61376P Lint Filter is a genuine replacement part that will work with dryers made by Amana, Kenmore, SpeedQueen, and Caloric. It has a screen and a plastic frame. This OEM SpeedQueen lint filter is sold individually. A gas valve coil kit is available but sold separately.

This 12-14 x 1/2 screw is a factory fastener used to secure appliance panels, brackets, and components. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and keeps parts properly aligned for reliable operation.

• Secures panels, brackets, and internal components to their mounting points
• Replaces damaged, rusted, or missing hardware
• Helps stop vibration and rattling caused by loose fasteners
• Restores proper alignment and stability of covers or assemblies

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the original screw's location and length; replace one at a time
• Start threads by hand to prevent cross-threading; tighten snugly without over-torquing
• Reinstall any original washers, clips, or spacers used with the screw

This part has been discontinued by the manufacturer and is no longer available.

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.