Ace Parts

The sprocket/gear assembly is a genuine replacement part that helps drive the chain in select MTD chainsaws. It is located under the engine cover housing and connects to the chain drive to create the motion that rotates the blade. Over time and with constant use, the gear and sprocket can both become worn down or develop issues that cause them to affect the operation of the saw. In this case, the best option is to replace the defective or damaged parts. This sprocket and gear assembly provides an exact fit for compatible equipment since it is an identical part. This genuine OEM replacement part is compatible with dozens of chainsaws and pole saws and is manufactured to exact standards. This durable sprocket and gear are made of premium composite and metal materials and the assembly is sold as a single unit. Allow the engine to cool completely and wear gloves for safety whenever performing any type of engine repairs. The spark plug should also be disconnected before working on the engine for the safe repair of all parts.

This is a genuine OEM oil seal sourced directly from the manufacturer for use in the engines of snowblowers and snowthrowers. Oil leaks are prevented using this oil seal on the worm shaft and beside the bearing-flange. It is made from durable plastic that is designed for heavy use; however, over time, the seal can become worn or damaged. Damage or wear to the oil seal can result in oil leaks and loss of engine performance. The oil seal will need to be replaced if oil is leaking from the snowblower. Replacing the oil seal will require a wrench set, pliers, and socket set. Following the diagram for the correct equipment model, disassemble the engine to reach the worm shaft and remove the damaged oil seal. Clean any old lubricant on the area. Install the new oil seal with fresh lubricant. Replace the engine parts in reverse order. Regular lubrication of the worm shaft will add to the engine's performance and prolong the life of the oil seal.This oil seal is sold individually. It is made for snowblowers and snow throwers manufactures by Ryobi, MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky.

This spring washer has a conical shape with an open center. It has a shape like a traditional washer but is smaller than a typical coiled spring. These washers can handle a larger load than a coiled spring and are used in lawn and garden equipment to cushion heavy loads. Over time, these washers can experience wear and tear which will lead to damage or breakage. When this occurs, the spring washer will need to be replaced.Visually inspect the spring washer for damage like scratches, breaks, and dents. If these occur or the washer is warped, it needs to be replaced. The process involves removing the nut or screw above the washer with a screwdriver or other tool. After accessing the spring washer, it can be removed and a replacement part can be added to the equipment. Reassemble the parts and the equipment should work again.This is a genuine OEM spring washer replacement part that is sold individually. It's sourced directly from the manufacturer. It is compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, chainsaws, string trimmers, and edgers by Craftsman, MasterCut, Toro, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Husky, Montgomery Wards, Murray, Huskee, Yard Machines, and MTD.

This is an authentic OEM replacement flat washer that has been sourced directly from the manufacturer. It is used with bolts and screws for fastening components on various lawn and garden equipment parts. Flat washers spread the load of the bolt or screw or are used if the hole for the fastener is larger than necessary. The washer fills in the gap, making it more secure. Washers may also be used to prevent the bolt or screw from coming in contact with the component and creating heat or friction that could damage the part. Flat washers are found underneath the head of the bolt or screw, between the fastener and the connected component. Washers may rust or break over time. These changes are visible, and a replacement washer should be installed when necessary.The tools required to remove the bolt or screw depend on what type it is. Wear work gloves when removing and replacing parts. Broken or frayed metal edges can cut. Use the appropriate tool to loosen and remove the fastener. Slide the washer off and place the new one on. Reinstall the bolt or screw and tighten. The flat washer is made of durable metal and sold as an individual component. The flat washer is compatible with chippers, shredders, lawnmowers, tractors, blowers, and other lawn and garden tools manufactured by Craftsman, Bolens, Yard Machines, Troy-Bilt, MTD, Yard-Man, and more.

This reel is a genuine MTD replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The function of a reel in a lawn trimmer is to collect the line in the reel housing and then unspool the line from the housing while the lawn trimmer is in use. Within the lifespan of a lawn trimmer, it is likely that the reel will suffer some damage. This might result in issues with unspooling the line, rendering the lawn trimmer impossible to use. Damage to the reel might occur as a result of general wear and tear, overuse, exposure to the elements, or collision with the ground or another object; additionally, the reel could suffer from gradual deterioration in the form of anything from small cuts and nicks to serious piercings and erosion. If the reel is damaged to the point that the lawn trimmer is unusable, the reel should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This reel is compatible with the following brands: MTD and Craftsman. This part sold individually.

This is a genuine OEM throttle cable that is designed for use with select gas string trimmers. The throttle cable connects to the carburetor and is used to stop the engine from running when the lever is shifted from throttle to choke. Over time, this cable is extended and retracted frequently and can become worn with use. It consists of the metal throttle cable and the plastic housing, and those can get broken or damaged as well, which will require the need for a full replacement. Without a functioning throttle cable, the engine may not run correctly, or the speed of the engine will not be able to be controlled. This replacement cable is ideal for compatible devices. This OEM throttle cable is manufactured to exact standards by MTD. It can be used with a variety of models of trimmers from MTD, Troy-Bilt, Yard Man, Cub Cadet, and Yard Machines. It is made of durable metal with a composite plastic housing. The trigger and screws are sold separately and will require an additional purchase if needed. Be sure to wear gloves when performing any equipment repairs.

The clutch assembly uses centrifugal force to connect the shafts and create the drive shaft motion that powers the machine. The drive shaft nests inside the other shaft, and over time these parts can wear and become damaged with regular use. Today's parts can even continue to function long past when they should, so it may not be apparent that a clutch assembly needs to be replaced until the entire unit is bad. If the engine is not performing as it should or if the drive shaft seems unstable, it may be time to replace the clutch assembly. This genuine OEM part includes everything needed for the job. This OEM clutch replacement is designed for use with various cultivators, edgers, and trimmers. It can be used on machines from MTD, RYOBI, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, Murray, and Husky. This assembly includes the clutch, clutch drum, washer, and left-hand threaded screw. Always disengage the spark plug and allow the engine to cool completely before beginning repairs.

As an air filter for trimmers used in the yard, this component helps keep the engine running smoothly when doing work. A clean air filter supplies the engine with clean air for the best performance. A visual inspection of the filter will offer insight into whether a replacement is needed. Maintaining the air filter will ensure it lasts longer and keeps debris from clogging the carburetor of the trimmer. If the original air filter has obstructions or large amounts of debris, it’s best to replace it. Tears in the filter also indicate a replacement is required to prevent any damage to the engine. This will entail removing the old air filter and placing a new one where it was. Opening the engine cover will give you access to the area where the air filter is housed. This replacement air filter is an OEM product that is directly from the manufacturer. It comes as an individual item and is designed for use with various Craftsman, Yard-Man, Cub Cadet, Bolens, Troy-Bilt, MTD, Murray, and Yard Machines trimmers. A screwdriver may be required to install the new air filter into the equipment.

This is a replacement belt that can be used on select edger/trimmer models of lawn and garden equipment. This is the main drive belt that is responsible for driving the trimmer blades. Belts are made of rubber and exposed to constant and repetitive motion, which can cause them to stretch or wear out over time. Eventually, they may become so loose or damaged that they will not be able to drive the blades and will need to be replaced. Without a properly functioning drive belt, the trimmer blades will not work. A genuine replacement part like this provides an exact fit for compatible units. This OEM drive belt is manufactured by MTD and can be used with select models of trimmers from the brand and a few models from Troy-Bilt, as well. This belt is sold as an individual unit and does not include any additional components or hardware. In order to replace the drive belt, a set of wrenches is required. It is advised to clean the pulleys before installing the new belt to ensure optimal performance and extend the life of the belt. Be sure to disengage the engine and wear gloves when replacing this belt or other internal parts.

This replacement blade is a genuine MTD part for select models of edgers. The edger blade is responsible for cutting the weeds and grass from the edges of concrete, landscaping, and other elements. Over time and with regular use, blades can become dull or damaged. They also contact the ground regularly, which can lead to dents or other damage. In the event that the edger blade is damaged or warped in any fashion, it should be replaced immediately for safe operation of the machine. This replacement part provides an exact fit for compatible units. This genuine edger blade from MTD is compatible with multiple units, including hundreds of models from Troy-Bilt, MTD, Yard Machines, Yard Man, Husky, and Bolens. This model has a 5/8” center hole for attaching the blade nut to secure the blade. Always wear gloves when replacing edger blades and be sure to disable the engine for added safety. This repair will require a wrench or socket set to remove the blade nut and replace it once the blade is changed. This blade is sold as a single unit and comes un-sharpened.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This V-belt is a certified genuine OEM replacement part for a snowblower engine. A V-belt is essentially just a loop of rubber but it is one of the most essential parts of the engine. The V-belt loops around a series of pulleys, and as the drive pulley is turned by the engine, the V-belt transfers that motion and turns the other pulleys. This allows the engine to run more efficiently. While an engine is running, the V-belt is constantly in motion, meaning that it receives a lot of wear. Over time, the rubber material will begin to fray, and if left too long, it will eventually slip or even snap. If the V-belt breaks, the transmission will no longer run and the auger blades will not turn. Therefore, it is important to check the V-belt's condition frequently. As soon as it begins to fray, replace it using a set of socket wrenches. Be sure to follow the owner's manual as a guide for how to loop the new belt. This replacement V-belt is compatible with MTD, Troy-Bilt, and Craftsman snowblowers and it comes sourced from its original manufacturer. This part ships individually.