Need Help?
Call or text
Fix an ice maker that stopped working or leaks water into the bin. This ice mold tray replacement takes about 10-20 minutes with our step-by-step video.
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level. With guidance from the video, I removed the icemaker from the wall of the freezer. The... Read more
Ice maker won't stop making ice or overflows? The shut-off arm signals when the bin is full. Simple DIY fix—just press both ends into place.
Replaced the ice level arm Read more
Ice not dispensing? A worn auger drive bar with stripped threads prevents ice from moving through the chute. Moderate DIY repair with video guidance.
I replaced the auger motor. You have to remove complete ice maker. Everything is just like help video to do except yoke dispenser. I watched video several times. Yoke will not just tap loose, after 30 minutes of tapping, I was using screwdriver to brace. I used a Dremel tool to cut part of shaft, came off easy then. After that, the repair went great. I have ice, I noticed motor I received was stronger. Parts came on time stated and worked great. I will order again on other repairs. Read more
Ice maker stopped working or want to add ice production? Complete add-on kit includes icemaker head, auger motor, and hardware. DIY install in 10-20 minutes.
Replaced it Read more
Ice won't dispense or auger jammed? Cracked ice bucket causes crushing problems. DIY replacement in under 30 minutes with our step-by-step video guide.
All the corners of the Ice Bucket were cracked and was causing the screw inside the bucket to jam. Read more
Ice bin overflowing or ice maker won't stop making ice? The shut off arm signals when to stop production. Simple install in under an hour.
Replaced it completely in less than an hour. Part was exact OEM replacement and worked perfectly. Read more
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Replaced icemaker and shutoff arm. Easy project. Read more
Ice maker leaking or shutoff arm broken? This fill cup and bearing assembly directs water into the mold and supports the arm. 15-minute DIY fix.
Watched online video and worked along - it was easy and quick - I was amazed! Read more
Ice dispenser not working or coupling spins freely? This motor coupling connects the dispenser motor to the auger. 10-minute fix with channel lock pliers.
I first thought it was the auger in the ice container so I changed it and it was not the problem. I then talked to ApplianceParts customer service that it might be the yoke on the motor that turned the auger or even the motor itself even though it worked. I ordered the parts, the yoke was supposed to be able to be changed by itself but mind would not come off the motor shaft so I had to cut it off just to remove it from the unit so I had to change the motor anyway because of this. So I advise... Read more
Ice won't switch between crushed and cubed? The dispenser solenoid controls the crusher mechanism. Most DIYers replace it in 25-30 minutes with basic tools.
Although the solenoid I purchased did not fix the problem, nor the "mother electronic board", or the motor, my experience with Appliance Parts Pros has been excellent. Extremely easy to look-up parts for my model refrigerator. Best part is their video instruction that gives you step-by-step hands-on how to remove and install. I would highly recommend these folks. If a lady such as myself can do repairs based on their instruction, anyone can. Thank you for providing such an informative... Read more
Ice maker not producing ice? This complete ice maker kit replaces failed units in 30-60 minutes. Includes all components to restore ice production.
Purchased the kit, followed instructions, within 30 minutes had the new ice maker installed. Works wonderfully. We were quoted over $350 to fix it from a repair agent, but it only cost $150 including shipping from you guys. Very happy. Read more
Ice won't dispense or auger jammed? This end cap secures the auger shaft and blade stack in the ice bin. Simple 5-minute DIY repair restores dispensing.
Removed old cap replace with new 5 min. works like new received new part in 2 days Read more
Cracked ice bin causing jams or leaks? This refrigerator ice container stores cubes beneath the icemaker and guides them to the dispenser door.
Called into AppliancePartsPros.com, gave them my serial number and they provided my part number and assisted me with getting my order processed. Read more
Ice won't dispense or jams in chute? Cracked bin or broken auger blades stop ice flow. This ice bin assembly restores dispensing. Easy DIY, no tools.
Replaced ice bin assy. Read more
Ice dispenser not working or making loud grinding noise? This ice auger and crusher blade assembly is often the fix. Simple 5-minute DIY repair.
Replaced both parts Read more
Ice maker overflowing or not stopping? This shut-off arm extension clips onto the bail arm to help the bin detect when full. Simple 5-minute fix.
Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes ! Read more