Parts for Lg LWC3063ST/00: Assembly Parts

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

A flat washer used with the appliance's fastening hardware to distribute load and reduce wear. Helps maintain secure connections and prevents damage to mating surfaces for reliable operation. What it does:

• Provides an even bearing surface for bolts or screws to prevent pull-through
• Reduces friction and wear between fasteners and housing parts
• Helps keep fasteners tight and resists loosening from vibration
• Commonly used where a smooth, protective spacer is needed

• Verify correct location and orientation before reassembly
• Use manufacturer-recommended fasteners and torque specifications
• Power off and unplug the appliance before accessing internal components

Replacement mounting screw for microwaves and wall ovens. Secures internal components and panels. Order a new screw if yours is stripped, missing, or lost.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

This hardware washer helps distribute fastener load and maintain proper spacing in your LG appliance. Replacing a missing or worn washer restores secure mounting and alignment, reducing vibration and rattling from loose assemblies.

• Distributes the load of a screw or bolt and protects mating surfaces to maintain alignment
• Helps keep components secure and at the correct spacing
• A damaged or missing washer can lead to loosening, vibration, or rattling during operation
• Ensures correct hardware stack-up during reassembly after service

• Disconnect power and shut off water or gas before servicing
• Note the order and orientation of any washers/spacers; take a reference photo
• Use the correct driver or wrench and tighten snugly—do not overtighten
• Replace companion hardware if corroded, stripped, or damaged

Replacement washer that secures fasteners and distributes load at connection points in ranges and ovens. Needed when original is missing, worn, or damaged.

This customized screw secures appliance components where a standard fastener won't fit, helping keep panels, brackets and small assemblies stable. It's a direct-fit replacement when the original specialized screw is missing or damaged. What it does:

• Fastens and holds appliance panels, brackets or small parts in place
• Prevents rattling, loose trim or misaligned components caused by a missing or stripped screw
• Matches the OEM fit and thread pattern for proper engagement and alignment
• Used in locations that require a non-standard or customized fastener

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten securely but do not overtighten; overtightening can strip threads or crack parts
• Keep removed hardware organized so you can reinstall in the original location

This hardware washer helps distribute fastener load and maintain proper spacing in your LG appliance. Replacing a missing or worn washer restores secure mounting and alignment, reducing vibration and rattling from loose assemblies.

• Distributes the load of a screw or bolt and protects mating surfaces to maintain alignment
• Helps keep components secure and at the correct spacing
• A damaged or missing washer can lead to loosening, vibration, or rattling during operation
• Ensures correct hardware stack-up during reassembly after service

• Disconnect power and shut off water or gas before servicing
• Note the order and orientation of any washers/spacers; take a reference photo
• Use the correct driver or wrench and tighten snugly—do not overtighten
• Replace companion hardware if corroded, stripped, or damaged

The Common Nut is an OEM part for LG ranges. It secures the fan blade to the motor shaft. This nut maintains the fan's stability and preventing it from becoming dislodged during use.

Causes of a bad common nut can include loosening over time due to vibration, improper installation, or damage from impact or mishandling.

Symptoms of a bad common nut include:

• Excessive noise or vibration from the fan assembly
• The fan blade becoming loose or detached, causing poor air circulation
• Potential risk of the fan blade becoming a projectile if completely detached

This OEM LG part is also compatible with some Kenmore models.a

Replacement mounting nut for cooktops and ranges. Secures components during installation. Order a new nut if yours is stripped, missing, or damaged.

Range not heating or control panel unresponsive? This control board assembly restores oven functions. Moderate difficulty repair requiring basic tools.

Fix a range that won't heat, cycle on, or respond to buttons. This control board assembly interprets inputs and restores reliable oven operation.

This cover insulator is the replacement insulation panel that helps reduce heat transfer and protects surrounding components. It restores proper thermal shielding to help appliances run safely and quietly. What it does

• Covers and thermally insulates internal components to help control heat transfer.
• Protects wiring and nearby parts from excess heat and reduces risk of heat-related damage.
• Can reduce noise by dampening vibration where installed.
• Commonly used when insulation is torn, missing, or degraded.

• Disconnect power before accessing internal components; ensure appliance is fully de-energized.
• Handle carefully to avoid tearing the insulation; use gloves if sharp edges or adhesive are present.
• Reinstall using original mounting points and fasteners; do not modify the part.

This plate assembly is the structural mounting plate that secures internal components and helps stabilize the appliance chassis for consistent operation. It restores proper fit and reduces movement of parts during use. What it does:

• Provides a stable mounting surface for internal components and assemblies
• Helps keep components aligned to prevent rubbing, noise, or premature wear
• Reduces chassis vibration and movement that can cause rattling or improper operation
• Used when the original base plate is bent, cracked, or missing fastener points

• Disconnect power to the appliance before beginning any repair
• Use appropriate tools and retain all fasteners; some disassembly of panels may be required
• Handle edges carefully; metal parts can be sharp

Replacement window glass for range oven doors. Restores clear viewing area when original glass is cracked, chipped, cloudy, or shattered. Installs inside door.

Front cover assembly for wall oven microwave combination units. Replaces cracked, damaged, or discolored exterior panel. Installs on the front face.

Replace a damaged or missing inner cover panel that exposes internal wiring or components. This panel restores interior appearance and protection. Moderate DIY.

Inner cover panel for wall ovens. Replaces cracked, damaged, or missing interior covers. Installs inside the oven cavity to restore appearance and protect.

Microwave door won't close or seal properly? This door assembly fixes damaged, bent, or cracked doors to restore proper sealing and appearance.

Structural support component that installs inside your wall oven cavity. Replace this supporter if it's bent, cracked, broken, or missing to restore stability.

Mounting bracket for wall ovens. Secures oven to cabinet cutout. Replace if bracket is bent, cracked, or missing to ensure safe oven installation.

Fix a wall oven that won't heat, won't start, or displays error codes with this main control board. Manages heating, timing, and all oven functions.

Fixes oven not heating, display issues, or erratic operation. This control board restores power distribution and core functions. Moderate DIY repair.

Wire harness for ranges and wall ovens. Connects electrical components within the appliance. Replace if wires are damaged, frayed, or connectors are broken.

Shields the waveguide from grease and food splatter to prevent arcing and maintain heating performance. Replace when damaged, stained, or burned. Verify fit by part number for your microwave model.

This flat case is the outer cover that protects and secures internal components, helping restore a clean, finished appearance and prevent debris or accidental contact. It's a direct replacement for the original flat housing piece. What it does:

• Replaces worn, cracked, or missing outer housing to restore proper enclosure
• Keeps wiring and components protected from dust and impact
• Helps reduce rattling or vibration caused by loose or damaged panels
• Restores alignment so adjacent panels and controls fit correctly

• One flat case outer cover

• Disconnect power before beginning any repair to avoid shock or injury
• Remove retaining screws or clips from the existing case and retain hardware if reusing
• Align the replacement case carefully, then secure with original fasteners
• If mounting requires additional parts or hardware, verify those separately; no extra hardware is assumed included

Replace your cracked, broken, or missing microwave glass turntable tray. Tempered glass design rotates to provide even heating during cooking.

Microwave light bulb holder assembly secures and powers your interior bulb. Replace if bulb won't light, holder is cracked, or connections are loose. Verify fit by model number before ordering.

This is a circular wire harness holder that secures and organizes internal wiring within the range. It clips onto the frame or mounting points to keep wires routed properly and away from heat sources. Replace this part if it is broken or missing, which can cause loose wiring or potential contact with hot surfaces.

Fix uneven heating or wobbling rotation. This microwave turntable assembly includes the glass tray and roller guide for stable, smooth spinning.

Turntable stopped rotating or making grinding noise? This synchronous motor restores smooth tray rotation for even heating. Simple DIY fix with a screwdriver.

Fix a microwave turntable that won't spin or wobbles during heating. This replacement shaft restores smooth glass tray rotation for even cooking.

Oven not heating or cooking unevenly? This heating element generates the heat needed to cook food. Common fix for temperature issues in electric ovens.

This circulating motor drives air movement inside the appliance to maintain proper airflow and temperature distribution. Replaces a worn or failed fan motor to restore normal ventilation and performance. What it does:

• Spins the internal circulation fan to move air through the appliance
• Helps maintain even temperature and proper airflow for cooling/heating cycles
• Common symptom: little or no airflow, unusual grinding or humming sounds

• One circulating motor

• Disconnect power before attempting any service to avoid shock or injury
• Handle the motor and fan blades carefully to avoid damage to fittings and wiring
• Verify mounting orientation and wiring color codes match the original during replacement

Mounting bracket secures your wall oven to the cabinet cutout. Replace if bracket is bent, cracked, or missing to ensure proper installation support.

This replacement reflector restores proper light/heat direction and helps protect the internal lamp area from damage. It installs in the appliance's interior to improve illumination and component coverage. What it does:

• Directs light or heat toward the intended area for consistent performance
• Protects the lamp/sensor area from direct contact and debris
• Replaces cracked, warped or missing reflectors that cause uneven lighting
• Helps eliminate rattling or loose-fit issues when the original reflector is damaged

• Disconnect power before starting any repair to avoid shock or injury
• Handle the reflector carefully to avoid scratches or bending that reduce effectiveness
• Use the same mounting hardware and fasteners removed during disassembly; do not overtighten

Metal drip tray installs inside your wall oven to support cookware and catch spills. Replace if cracked, warped, rusted, or missing for a clean cavity.

Halogen bulb that illuminates the cavity or cooktop below your microwave. Replace when dim, flickering, or burned out. Confirm fit with model number.

Wall oven stopped moving or cycling intermittently? This AC synchronous motor assembly restores precise rotation and timing. Moderate DIY repair.

Oven not heating properly or taking too long to reach temperature? This halogen heating element restores concentrated heat for normal baking and roasting.

This rear cover is the factory-style cabinet rear panel that protects internal components and helps maintain appliance structure. It restores the appliance's enclosure and keeps wiring and parts shielded for safe operation. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Helps reduce noise by enclosing moving parts and support structure
• Provides mounting surface for internal parts and routing for wiring
• Prevents exposure that can lead to sparks, shorting, or further component damage
• Common symptom: missing, cracked or loose rear cover, rattling or exposed components

• Disconnect power (unplug or switch off breaker) before starting any repair
• Use correct screws and fasteners; do not force or bend the panel into place
• Wear gloves to avoid cuts from sharp sheet-metal edges and check for pinched wiring after reassembly

This is a metal oven rack that slides into the guide rails inside a wall oven cavity. It provides a flat, stable surface for holding cookware and bakeware at various height positions during cooking. Replace this rack if it is bent, warped, rusted, or no longer slides smoothly in and out of the oven.

This replacement part is a slide rack that has been manufactured by LG and is compatible with wall ovens. The slide rack is an internal component of the oven that provides a stable, heat-safe surface on which to balance cookware and place food inside the oven. Over time, this part could become bent, dented, warped, corroded, lost, or broken, requiring replacement. No tools are required to replace this part. Simply slide out the old rack and slide the new one into place. Ensure that oven is completely cooled down before attempting this to prevent serious burn injuries. This is a genuine OEM part that has been sourced directly from the manufacturer. This is an authentic part made of high-quality, durable, non-corrosive metal and is compatible with different wall ovens manufactured by LG and other brands. This part is only sold individually.

This water housing assembly routes and supports the refrigerator's internal water path, providing a sealed connection for water flow to the dispenser and icemaker. Replaces a cracked or leaking housing to restore proper water delivery. What it does

• Channels water from the supply line to internal dispenser/icemaker components
• Provides sealed mounting surfaces and ports for water lines and valves
• Stops leaks caused by cracked or warped housings
• Helps resolve weak or no-water flow symptoms when housing damage interrupts the path

• One water housing assembly

• Turn off refrigerator power and shut off the water supply before beginning service
• Use proper tools and a towel to catch residual water; inspect seals and O-rings and replace if damaged
• Check all connections for leaks after restoring power and water

Catches drips, crumbs and grease during cooking to protect your oven floor and simplify cleanup. Replace if warped, rusted or missing. Confirm fit with your model.

Fix unresponsive control panel buttons with this tactile switch replacement. Restores reliable button response. Simple DIY repair, typically under 5 minutes.

This is a micro switch that detects whether the microwave door is properly closed and latched. It is part of the safety interlock system that prevents the microwave from operating with the door open. Replace this switch if the microwave does not start when the door is shut, runs with the door open, blows a fuse when the door closes, or stops mid-cycle intermittently.

The Switch, Micro is an OEM part for LG microwaves. This micro switch is crucial for the operation of the microwave door mechanism, ensuring that the microwave only operates when the door is securely closed.

Causes of a bad micro switch can include wear and tear from frequent use, damage due to electrical faults, or physical impact that disrupts its functionality.

Symptoms of a bad micro switch include:

• The microwave not starting or stopping unexpectedly
• The door not latching properly
• The microwave light not turning on or off correctly
• Error messages appearing on the control panel

This OEM LG part is also compatible with Sears/Kenmore models.

Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.

This high-voltage transformer supplies the high-voltage power needed by the microwave's magnetron so the oven can heat food. Replaces a failed transformer to restore proper microwave operation when the HV supply is the issue. What it does:

• Converts incoming mains voltage to the high voltage required by the magnetron
• Commonly fails when the oven produces little or no heat
• Can cause loud humming, burning smell, or visible arcing if damaged
• Failure may be accompanied by blown fuses or a tripped thermal cutoff

• Disconnect power and fully discharge the high-voltage capacitor before servicing
• Handle carefully; contains components that store dangerous voltage even when unplugged
• Follow OEM service manual wiring and mounting instructions; replace grounding and insulation parts as required

This magnetron is the microwave high-voltage tube that produces the microwave energy used to heat food, restoring oven heating performance and cooking consistency for compatible microwave ovens. What it does:

• Generates the microwaves that heat and cook food in the oven cavity.
• Replaces a failed magnetron when the microwave stops heating or takes much longer to cook.
• Can resolve symptoms such as little or no heating, uneven heating, loud buzzing or humming, and unusual burning or arcing smells.
• Works with the oven's high-voltage circuitry and waveguide to deliver power into the cooking cavity.

• One magnetron

• High-voltage risk: always unplug the appliance and discharge the high-voltage capacitor before servicing.
• Inspect and replace any damaged waveguide covers, seals, or mounting hardware to prevent arcing.
• Do not operate the oven with the outer cover removed or with damaged door interlocks.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

This thermostat controls refrigerator temperature by opening and closing the cooling circuit as needed to maintain set temperatures. Replaces a failed or intermittent temperature control to help restore consistent cooling and food safety. What it does:

• Senses cabinet temperature and signals the cooling system to cycle on or off
• Stops continuous running when thermostat fails closed or restores cooling when stuck open
• Commonly used to address inconsistent temperatures, warm spots, or compressor short-cycling
• Passive electromechanical component—no programming required

• Disconnect power to the appliance before starting any repair
• Handle terminals and sensor capillary carefully to avoid bending or damage
• Confirm wire connections match the old thermostat and secure spade terminals firmly

Microwave won't heat or makes loud buzzing noise? The diode regulates magnetron current flow. Simple repair—test with multimeter for continuity.

Fix F9 error code or oven not heating issues. This thermal safety thermostat monitors temperature to prevent overheating. DIY repair in 15-60 minutes.

If your oven won't reach the right temperature or shows an F9 error, the temperature sensor may be faulty. Simple DIY repair in under 45 minutes.

Mounting bracket for microwaves. Secures the unit to cabinetry or wall. Replace if bent, cracked, or missing to ensure proper installation support.

Replace a broken or damaged motor bracket causing loose or misaligned oven fan motor. Straightforward repair that restores proper motor mounting and support.

Fix inaccurate oven temperatures with this range temperature sensor. Restores proper heating cycles when your oven runs too hot or cold.

Fix range control panel display issues or power failures with this DC power jack. Restores electrical connection to control board. Moderate DIY repair.

This thermostat controls oven/dryer temperature by opening or closing its contacts as the appliance reaches set temperatures, helping maintain safe and consistent operation. Replaces a worn or failed thermostat to restore proper temperature regulation. What it does:

• Senses temperature and interrupts heating when limits are reached to prevent overheating
• Re-establishes heating when temperature falls, maintaining normal cycle performance
• Commonly installed when an appliance won't heat, overheats, or cycles erratically
• Works as a direct replacement for the OEM thermostat designed for compatible LG units

• One thermostat

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Note wire locations or take a photo before removing wiring; reconnect wires to the same terminals
• Use a multimeter to verify thermostat continuity and correct operation before and after replacement

Oven not cooling properly or overheating? This fan assembly restores airflow and temperature control. Includes motor and blade for complete repair.

This reflector assembly restores proper reflection inside the appliance, helping redirect light/airflow as intended for consistent performance. Replace a cracked, dented, or missing reflector to reduce glare, rattling, or uneven operation. What it does

• Directs reflected light and airflow within the appliance to maintain designed performance.
• Helps prevent hot/cold spots or uneven airflow caused by a damaged reflector.
• Stops loose or broken reflector pieces from rattling during operation.
• Restores proper fit and alignment when the original reflector is bent, cracked, or missing.

• Disconnect power (unplug or switch off circuit breaker) before starting any repair.
• Handle carefully; edges may be sharp—wear gloves and eye protection.
• Remove panels and fasteners as shown; retain original screws for reinstall.

Replace a sheath heater when your wall oven won't heat properly or heats unevenly. This heating element is a moderate repair taking 30-60 minutes.

This AC fan motor powers the appliance's cooling fan to move air across coils for proper heat exchange and temperature control. Designed as a direct replacement to restore normal airflow and cooling performance. What it does:

• Spins the cabinet/condensing/evaporator fan to circulate air for heat exchange
• Restores airflow if fan is noisy, intermittent, or not running
• Helps prevent overheating by maintaining proper condenser/evaporator ventilation
• Reduces cycling issues caused by poor air movement

• Disconnect power before servicing to avoid shock or injury
• Handle the motor and fan blades carefully to prevent damage to wiring and connectors
• Verify mounting orientation and connector fit before securing the motor

Fix loose or misaligned range components with this retaining ring. Secures parts in place to prevent excess movement and wear. Simple installation.

The convection fan blade is the spinning component inside your oven that circulates hot air evenly throughout the cooking cavity during convection cooking. By moving air continuously, it helps food cook faster and more evenly than standard bake mode. Replace this part if you notice uneven cooking results, longer bake times, or if the fan is making a rattling or grinding noise during operation.

This Fan Blade is an OEM part for LG microwaves. It is a critical component designed to circulate air within the microwave, aiding in heat dissipation and ensuring even cooking. 

Fan blades in microwaves can suffer from wear, imbalance, or damage due to regular use or accumulation of debris. A malfunctioning fan blade can lead to inadequate ventilation, affecting the microwave's cooking efficiency and potentially causing overheating.

Symptoms of a bad fan blade include:

• Unusual noises during operation, such as rattling or buzzing, indicate a loose or damaged blade.
• The microwave overheating or shutting off prematurely.
• Inconsistent cooking or hot spots in food suggest poor air circulation.
• The fan not starting, or stopping unexpectedly during use.
• Visible signs of damage or wear on the blade.

This OEM LG part is also compatible with some Sears/Kenmore models.
 

This is the motor housing or support bracket that holds the convection fan motor in place inside the oven. It secures the motor and ensures proper airflow for even cooking during convection baking. Replace this housing if it is cracked, warped from heat exposure, or if the convection fan vibrates excessively or sits loosely.

Idle bracket for wall ovens. Mounts internally to support and secure components in place. Replace if bracket is bent, broken, or missing during repair work.

Fixes power connection issues or arcing at the terminal block. This socket connects your range power cord to internal wiring. Moderate DIY repair.

Door hinge bracket for wall ovens. Secures and supports the door hinge mechanism. Replace if bracket is cracked, bent, or broken causing door misalignment.

This is a sheath-style heating element mounted at the top of the oven cavity that provides high, direct heat for broiling. It glows red when functioning properly and is responsible for searing and browning food from above. Replace this element if it no longer heats up, heats unevenly, has visible cracks or blistering, or if the broil function stops working entirely.

This heater sheath is the protective cover that surrounds the dryer's heating element, helping protect wiring and other components from direct heat. It lets the heater run safely and reduces the chance of element contact with other parts. What it does:

• Covers and shields the heating element from contact with the dryer drum and internal components
• Helps maintain proper airflow around the heater assembly
• Can prevent arcing or shorting caused by a damaged or mispositioned element
• Commonly replaced when the sheath is cracked, deformed, or shows heat damage

• One heater sheath

• Disconnect power before starting — this part is part of the dryer's high-temperature electrical system
• Access usually requires removing the dryer front panel or drum per the model's service instructions
• Inspect the heating element, thermostats and wiring while the unit is open; replace any damaged components
• Use proper fasteners and routing to keep the sheath positioned so it does not contact the drum

Replace your worn range oven door gasket to restore proper heat sealing and improve cooking efficiency. Verify fit with your model number before ordering.

Packing gasket creates a secure seal to prevent leaks and air loss in your oven. Replace if worn, cracked, or damaged to restore proper function. Verify fit.

Replace your wall oven's vent assembly if it's cracked, damaged, or missing. This assembly installs at the top or rear to ensure proper ventilation.

Fix poor ventilation or overheating in your wall oven with this air outlet vent. Restores proper airflow and exhaust function. DIY-friendly repair.

This plate guide is the rotating support that centers and stabilizes the microwave's glass tray for smooth, even rotation during cooking. It restores proper turntable movement and helps prevent wobbling or scraping. What it does:

• Supports and centers the glass turntable so it rotates evenly
• Keeps the tray aligned with the drive coupling to prevent slipping
• Reduces wobble and noise caused by a worn or broken guide
• Can resolve symptoms like an off-center, wobbly, noisy, or non-rotating turntable

• One plate guide

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove the glass tray and roller ring to access and replace the guide
• Handle glass parts carefully to avoid chips or cuts; reinstall components in proper order
• No special tools typically required; test rotation after reassembly