Parts for Ge PTD90EBST0WS: Backsplash, Blower & Motor Assembly Parts

This selector knob is the replacement control knob that lets you choose settings on your appliance's control panel. It restores a secure, easy-to-grip interface so selections are clear and reliable. What it does:

• Replaces a worn, cracked, or missing control knob so you can reliably change appliance settings.
• Provides a tactile grip and visible pointer for accurate selection of cycles or functions.
• Stops slipping or loose rotation that can prevent correct setting selection.
• Matches the original shape to engage the control shaft properly.

• Remove power to the appliance before replacing the knob to avoid accidental operation.
• Most installations simply pull the old knob straight off the control shaft and push the new knob fully onto the shaft until seated.
• If fit is tight, align the internal spline with the control shaft and press firmly; do not force at an angle.

Fix a dryer that won't start, stop mid-cycle, or run too long with a new main control board. This board manages motor, heater, and cycle timing.

Fix unresponsive dryer controls or blank displays with this user interface control board assembly. Moderate difficulty repair requiring basic tools.

Rear access panel for dryers. Covers the back of the dryer cabinet and provides access to internal components. Replace if cracked, damaged, or missing.

Secures dryer panels and internal components to the cabinet frame. Replace if screw is stripped, missing, or loose to prevent vibration and rattling.

Size: 8-32 t. Includes 12 screws.

Replace a cracked, worn, or missing washer in your dryer. This small hardware component ensures proper spacing and tension between parts during operation.

This Wi-Fi & Bluetooth control board restores wireless connectivity so your appliance can pair with smart devices and communicate with apps or hubs. It replaces a failed or unresponsive wireless module to re-enable remote monitoring and control. What it does:

• Provides Wi-Fi and Bluetooth radio functions for appliance app connectivity and smart features
• Enables remote diagnostics, notifications, and appliance-to-app communication when supported
• Replaces boards that show no wireless connection, intermittent pairing, or failed network registration
• Works as the appliance's primary wireless interface; does not include separate display or main control board functions

• One Wi-Fi & Bluetooth control board with instructions

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Follow manufacturer instructions for board handling and ESD-sensitive components
• Verify wiring harness connections and antenna leads are secured and routed per OEM guidance

8-18 hi/lo 5/8

The Blower Wheel is an OEM component specifically designed for GE dryers. It is responsible for circulating air during the drying cycle, directing airflow through lint and clothes to remove moisture. The plastic blades of the blower wheel push air through the dryer and out the vent when the motor is running. 

Symptoms of a bad blower wheel include:

• Slow or inefficient drying times even on low moisture loads    
• Strange noises from inside the dryer cabinet      
• Excessive vibrations felt through the dryer door or cabinet
• Bent or cracked blower wheel blades

Causes can include normal wear and tear over time, accidents that damage the blades, or failures in the secure mounting of the blower wheel.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Secures your dryer motor to the cabinet to reduce vibration and noise. Replace if motor shifts or rattles during operation. Confirm fit with your model.

Dryer drive belt connects the drum to the motor for tumbling action. Replace if your drum won't turn or you hear squealing. Confirm fit with your model.

Idler pulley for dryer drum assembly. Maintains belt tension to enable smooth drum rotation. Replace if worn, cracked, or causing noise during operation.

Dryer idler arm tensions the drive belt for smooth drum rotation. Replace if your dryer is noisy, squealing, or the drum won't turn. Verify fit by model.

Seals the blower-to-exhaust duct connection in your dryer. Replace if torn, brittle, or causing heat loss and longer dry times. Confirm fit by model.

Channels heated air from drum to vent for efficient drying. Replace if cracked or damaged to restore airflow and reduce noise. Confirm fit with model.

Is your dryer overheating or taking too long to dry? A damaged exhaust duct restricts airflow. This vent connector restores proper ventilation.

Fixes dryer overheating or not heating issues. This thermostat regulates drum temperature by controlling power to the heating element during cycles.

This plate motor drives the microwave/oven turntable, keeping the glass tray rotating for even cooking and heating. Replaces a worn or failed motor to restore tray rotation and reduce uneven heating. What it does:

• Turns the glass turntable so food cooks evenly
• Stops rotation or hesitates when motor fails or wears out
• May make buzzing, grinding, or intermittent noises before failing
• Prevents the turntable from rotating if the motor no longer engages

• One replacement plate (turntable) motor

• Disconnect power before servicing to avoid shock; verify unit is fully powered off
• Remove the turntable glass and roller guide to access the motor underneath the oven/microwave floor
• Typical install requires removing interior fasteners and unplugging the motor connector; retain hardware for reassembly

Dryer shuts off mid-cycle or overheats? The outlet control thermistor monitors exhaust temperature. Moderately difficult repair requires drum removal.

Fastens panels, brackets, and trim to appliance cabinets. Replace this screw when the original is missing, stripped, or damaged during service work.

Replacement idler spring for dryers. Provides tension to keep the idler pulley and drive belt aligned. Replace if spring is stretched, broken, or worn.

Secures the idler assembly to the dryer chassis to maintain proper belt tension. Replace if screw is stripped, missing, or won't hold the tensioner.

Fix a dryer that won't tumble or has no airflow with this motor and blower assembly. Restores drum rotation and proper air circulation.