Parts for Lg LDF5545SS/00: Base Assy Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

This lower frame is the factory replacement trim piece that mounts to the base of the appliance door/cabinet, restoring proper fit and finished appearance. It helps protect the lower edge and keeps the door aligned. What it does:

• Replaces a damaged, cracked or bent lower cabinet/door frame to restore proper sealing and appearance.
• Supports the bottom edge of the door or cabinet opening to help maintain alignment and smooth operation.
• Prevents debris and moisture from collecting under the door trim.
• Helps eliminate rattling or loose trim caused by broken or worn lower frame pieces.

• One lower frame

• Basic removal of the door or front panel may be required; retain screws and fasteners for reassembly.
• Handle panels and sharp edges with care; wear gloves to protect hands.
• Disconnect power (and water if applicable) to the appliance before beginning any disassembly.

Detergent and rinse aid dispenser

Secures dishwasher to countertop or cabinet to prevent tipping. Includes mounting brackets for stable installation. Replace if broken, missing, or worn.

This factory-assembled replacement installs in the same location as the original assembly on your appliance. It restores proper fit and operation when the original component is broken, worn, or missing.

• Replaces the complete assembly specified for your model
• Restores correct fit, alignment, or movement of the associated mechanism
• Helps resolve issues caused by cracks, wear, or physical damage in that area
• Match by part number and model for an exact fit

• Disconnect power before servicing; shut off water or gas supply if applicable
• Use your model's parts diagram to confirm location and orientation
• Transfer any mounting hardware or brackets from the original assembly
• Handle sharp edges carefully and verify proper operation before final reassembly

Small sleeve bushing that supports pivoting or rotating joints in your dishwasher. Replace when worn, cracked, or causing excess friction between moving parts.

Door won't stay open or slams shut? This dishwasher door hinge spring provides counterbalancing tension for smooth opening and closing operation.

The Dishwasher Door Cable Connector Assembly is an OEM replacement part for LG dishwasher. The cable connector assembly works with the door cable to properly guide and support the door as it moves through the full range of opening and closing motions. 

Causes of a bad door cable connector can include wear and tear over time resulting in cracks, loose connections, or broken or damaged connectors that no longer securely attach the cable. 

Symptoms of a bad door cable connector include:

• The door not properly aligning when closed 
• Difficulty opening or closing the door smoothly
• Noisy operation or rattling sounds from the door area
• The door not latching securely in place

This OEM LG part is also compatible with select Sears/Kenmore brand models.

This drum roller supports the dryer drum for smooth rotation and quieter operation. Replacing a worn roller helps reduce noise and drum wobble so the dryer runs more reliably. What it does:

• Supports the drum rim and allows the drum to spin smoothly under load
• Reduces squeaks, thumps and vibration caused by worn or damaged rollers
• Helps prevent uneven drum wear and excessive belt stress
• Works as a direct replacement for the factory roller in compatible dryers

• Disconnect power (and gas, if applicable) before beginning any service
• Access the roller per the manufacturer's service instructions (panel/drum removal is typically required)
• Inspect the drum, belt and other rollers/shafts while the unit is open; replace any worn components
• After installation, rotate the drum by hand to ensure smooth movement before reassembly

The WATER LEVEL SENSOR ASSEMBLY is an OEM component specifically designed for LG dishwashers. It is an electronic sensor responsible for monitoring and detecting the water level inside the dishwasher tub during each cycle. Precise water level detection allows the dishwasher to optimize water usage and ensure all cycles run as intended. 

Causes of a bad sensor assembly can include the buildup of sediment or minerals on the sensor contacts over time, leading to improper readings. Physical damage from impact could also affect sensor function.

Symptoms of a bad water level sensor assembly include:

• Incomplete or failed wash cycles 
• Error codes related to water issues
• Inability to fill or drain properly
• Flooding or leaks from the dishwasher 

Replace yours today with this genuine OEM LG part to maintain proper dishwasher operation. This OEM LG part is also compatible with Sears/Kenmore.

Check valve that prevents water backflow in the appliance's supply line, helping restore proper water flow to the ice maker or dispenser. Replaces a failed valve to address leaking, slow fills, or no-fill conditions. What it does:

• Stops reverse flow in the water line so water only moves toward the dispenser or ice maker
• Helps prevent water leaks and cross-contamination of the supply line
• Common symptom fixes: intermittent or no water to ice maker/dispenser, weak fills, or water pooling
• Fits inline with existing water tubing and works with the appliance's fill system

• Shut off water supply and unplug the appliance before replacing the valve
• Confirm tubing size and orientation before installation; install with correct flow direction
• Tighten fittings to prevent leaks but avoid overtightening plastic fittings

The Diverter Motor Assembly is an OEM part for LG dishwashers. It is a critical component used to control the direction of water flow within the dishwasher, ensuring that water is properly diverted between the different spray arms during various wash cycles.

Symptoms of a failing Diverter Motor Assembly include:

• Inadequate cleaning of dishes, with some areas remaining dirty
• Unusual noises, like humming or clicking, indicating the diverter motor is struggling to operate
• Error codes displayed on the dishwasher that relate to water distribution problems
• Water not reaching all spray arms

Causes of a bad diverter motor can include wear and tear from regular use, electrical issues such as faulty wiring or motor failure, and mechanical obstructions or debris that prevent the diverter from moving smoothly.

This OEM LG part is also compatible with Sears/Kenmore models.

The Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting when the door is securely closed prior to starting a cycle. This important safety feature prevents accidental exposure to hot water, detergent, and chemicals. 

Causes of a bad micro switch include degradation from years of repeated use, debris interfering with mechanisms, or damage from attempts to force or slam the dishwasher door closed.

Symptoms of a bad micro switch include:

• Cycles failing to start despite a closed door
• Hot water or steam visible escaping when running 
• The dishwasher not detecting the closed door position
• Error codes displayed related to door position sensors

This OEM LG part is also compatible with Sears/Kenmore. Replacing only when truly faulty helps ensure safe and reliable dishwasher function.
 

Fix spray arms not rotating or dishes not getting clean. This water distribution shaft assembly directs water to spray arms during wash cycles.

Replaces a cracked, damaged, or discolored dishwasher front cover assembly. This panel forms the exterior face of your appliance door for a clean look.

Dishwasher not draining, making loud humming or whining noises, or showing HE error code? The circulation pump assembly is likely the issue. DIY-friendly.

The Lower Cover Assembly is an OEM part for LG dishwashers. Made of sturdy steel, this lower cover adds structure and protection along the bottom of the appliance.

Causes can involve general wear from years of use and repeated washing cycles. Exposure to moisture also contributes to degrading metal over time.

Symptoms of a bad lower cover include:

• Rust, dents or other damage compromising integrity
• Exposed wires or sharp edges posing a safety hazard
• Drafts or debris entry through openings in the cover
• Loose or misaligned panel affecting performance

This OEM LG part is also compatible with some Kenmore models.

This guide assembly is the sliding rail that supports and aligns the freezer drawer. When worn or damaged, it can cause sticking, sagging, or poor sealing; replacing it restores smooth operation and proper drawer closure.

• Supports the freezer drawer and lets it glide smoothly in and out
• Keeps the drawer square and aligned with the front panel
• Helps the drawer close fully to maintain a proper seal
• Common symptoms: drawer hard to open/close, crooked or sagging drawer, grinding/squeaking, frost from incomplete closure, visible rail damage

• Disconnect power before servicing; empty the freezer drawer
• Pull the drawer out, remove the front panel and basket as needed
• Remove mounting screws and the old guide; reuse existing hardware if applicable
• Install the new guide, then verify both sides move evenly and the drawer seals properly

This inlet hose directs the incoming water supply into the appliance so it can fill and operate properly. Replacing a damaged or worn inlet hose restores a secure water connection and helps prevent leaks and fill issues. What it does:

• Channels household water from the supply to the appliance's fill system.
• Ensures a watertight connection at the water inlet to reduce leak risk.
• Restores normal fill behavior when a cracked, split, or clogged hose causes slow fill or no fill.
• Works with standard inlet fittings and clamps used on compatible appliances.

• One inlet hose.

• Turn off the water supply and unplug or disconnect power before servicing.
• Use the correct fittings and clamps; hand-start threads to avoid cross-threading, then snug with a wrench—do not overtighten.
• Inspect hose ends and inlet seal for damage; replace clamps or seals if needed.
• After installation, restore water and power, run a short fill cycle and check thoroughly for leaks.

A small snap-on trim cap used to cover and protect exposed fasteners or openings, restoring the appliance's finished appearance and helping keep debris out of the cavity. What it does

• Covers and conceals exposed screw heads or shaft ends for a clean look
• Helps prevent dust and lint from entering small openings
• Restores damaged or missing finish trim on the appliance
• Fits as a simple cosmetic/protective replacement — commonly used where a snap-fit cap is required

What's included

• One cap cover

Install notes

• Snap into place over the exposed fastener or opening; no special tools usually required
• Disconnect power or follow appliance safety procedures if working near electrical components
• Replace only with the matching part number to ensure proper fit

The Drain Pump Case Assembly is an OEM replacement part for LG dishwashers. This component houses the drain pump, which is responsible for removing water from the dishwasher tub during the drain cycle.

Causes of a bad drain pump case assembly can include physical damage or cracks in the case, worn-out seals or gaskets, or issues with the internal components, such as the pump impeller or motor.

Symptoms of a bad drain pump case assembly include:

• Water not draining from the dishwasher tub
• Loud grinding or humming noises during the drain cycle
• Leaks around the pump area
• Error codes or indicators related to drainage problems

This OEM LG part is also compatible with Sears/Kenmore dishwasher models.

The Lower Spray Arm is an OEM part for LG dishwashers. It is responsible for cleaning dishes positioned in the lower rack through its rotating spray of water.

Causes of failure can be mineral or limescale buildup inhibiting rotation, broken or loosened mounting brackets, or damage from impact.

Symptoms of a bad lower spray arm include:

• Items in the lower rack remaining dirty or soiled after cycles
• Noticeable reduction in spray pressure from the lower rack
• Arm not rotating or spinning during the wash cycle

This OEM LG part is also compatible with some Kenmore models.

The Shaft,Nozzle is an OEM part for LG dishwashers. This part is located inside the dishwasher's spray arm assembly and is responsible for distributing water to the spray arms during the wash cycle.

Causes of failure can be mineral deposits that clog the nozzle openings or flexible shaft deterioration over time.

Symptoms of a bad shaft or nozzle include:

• Inadequate or uneven spray coverage inside the dishwasher
• Dirty dishes, especially on hard to reach areas
• Reduced water pressure during the wash cycle

This OEM LG part is also compatible with some Kenmore models.

The Fill Funnel Gasket is an OEM part for LG dishwashers. It is located inside the fill funnel that pours water into the dishwasher during cycles. The gasket seals around the fill funnel to prevent leaks and direct water as intended. 

Symptoms of a bad fill funnel gasket include:

• Water leaking from the fill funnel area into the interior tub during washing cycles
• Puddles forming inside the tub, not related to normal operation  
• Gaps or tears appearing where the funnel meets the surrounding gasket seal

Causes of a bad fill funnel gasket can be wear and tear over time if the funnel is moved often during loading or maintenance. Chemical residue or mineral buildup could also deteriorate the rubber material.

This replacement part is also compatible with Sears/Kenmore models for simple installation and reliable repairs.

Fixes poor cleaning and spotty dishes caused by weak water spray. This dishwasher spray nozzle assembly restores proper water distribution. Moderate DIY.

Fix poor cleaning or weak spray with a new dishwasher spray arm manifold. Distributes water to all spray arms for complete dish coverage. DIY repair.

Captures food particles and debris to maintain proper water flow. Replace when clogged or damaged to restore filtering performance. Confirm fit with your model.

This refrigerator water filter cartridge helps reduce common impurities and improves the taste and clarity of drinking water and ice. It's a direct-replacement style designed to fit compatible LG refrigerator filter housings. What it does

• Reduces sediment, chlorine taste and odor commonly found in household water supplies
• Helps improve the taste and clarity of ice and dispensed water
• Restores proper filtration when your fridge shows reduced water quality or off-flavors
• Maintains normal water flow when properly installed and not clogged

• Replace with power on and water supply turned on; follow refrigerator manufacturer instructions
• Flush several gallons of water through the filter after installation to remove trapped air and loose carbon fines
• Dispose of used cartridge according to local recycling/disposal rules
• If you continue to experience poor water quality or low flow after installation, check the refrigerator's filter housing and water supply line

This case assembly is the outer housing that holds and protects the appliance's control components and switches, restoring a finished appearance and keeping electronics secure. It's a direct-replacement style part for visible control areas. What it does:

• Provides a protective enclosure for control boards, switches and user interface components
• Restores a secure, stable mounting point for buttons, levers and display elements
• Helps prevent dust, moisture and debris from reaching internal electronics
• Can resolve loose or damaged control bezel issues and improve appliance appearance

• Handle carefully to avoid scratching the visible surfaces and damaging tabs or mounting points
• Power off and unplug the appliance before starting work to reduce risk of shock
• Retain and reuse any clips, screws or gaskets from the original part unless replacements are supplied

This safety switch assembly replaces a failed door/interlock switch to restore the appliance's ability to detect and respond to door position, helping ensure cycles only run when the door is closed. Fits as a direct replacement for the original switch assembly. What it does:

• Detects door/lid position and prevents operation when the door is open
• Helps stop the motor or heating function if the door is opened mid-cycle
• Commonly replaces units that show no power to controls or won't start with the door closed
• Can address intermittent operation or machines that behave as if the door is open

• Disconnect power before servicing to avoid shock or injury
• Replacement requires access to the door/lid area; basic hand tools needed
• Verify proper wiring orientation and secure connectors before reassembly

Replace your dishwasher's door liner assembly if it's cracked, warped, or damaged. This inner door panel covers components and provides insulation.

Inner door liner assembly for dishwashers. Replaces the plastic panel inside the door when cracked, warped, or damaged. Includes mounting structure.

This Door Seal is an OEM part for LG dishwashers. It plays a crucial role in preventing water leaks by creating a watertight seal around the dishwasher door. 

Over time, door seals can degrade due to constant exposure to water, detergents, and varying temperatures. This can lead to a compromised seal, increasing the risk of leaks during operation.

Symptoms of a failing door seal in a dishwasher include:

• Water leaking from around the dishwasher door.
• Visible signs of wear, cracks, or damage to the seal.
• The door not closing as tightly or securely as it used to.
• Dampness or water marks on the floor near the dishwasher after use.
• An increase in noise during operation, potentially due to water escaping the seal.

This OEM LG part is also compatible with some Sears/Kenmore models.
 

This parts assembly is a direct-replacement assembly used to restore the original mechanical/electrical components it contains so the appliance can operate as designed. It replaces a worn or damaged assembly to help resolve related failures. What it does

• Replaces the factory assembly that houses the appliance's internal components and connections.
• Restores proper component alignment and secure mounting to prevent intermittent faults.
• Addresses symptoms such as failure to operate, unusual noises, loose or damaged internal parts, or intermittent electrical/connectivity issues.
• Works as the factory-specified repair for units showing wear or damage in the affected assembly area.

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or injury.
• Handle internal components carefully to avoid damage to wiring, connectors, or sensors.
• Follow the OEM service manual and wiring diagrams for correct installation and routing.

Supports and guides moving components inside your dishwasher. Replace if your rail is cracked, broken, bent, or missing to restore smooth operation.

Holds utensils and small items upright in your dishwasher's lower rack. Replace if the basket is cracked, broken, or missing prongs that no longer secure items.

The Blower Motor Casing Assembly is an OEM part for LG dishwashers. This part houses the blower motor which generates airflow through the wash arms and drying vent. The casing is precision-engineered to fit securely within the dishwasher's structure.

Causes of a bad blower motor casing assembly can include cracked or warped plastic from repeated heating and cooling cycles. The seals around the motor connection points may also deteriorate over time.

Symptoms include:

• Incomplete or overly long drying cycle times
• Water pooling in the bottom of the dishwasher after cycles
• Sloshing or excess moisture noise heard coming from inside
• Irregular or strange smells emanating from within the unit

This LG part is also compatible with some Kenmore models.

This locker lock is the replacement latch mechanism that secures the appliance door during operation, restoring proper door closure and helping the unit run safely and reliably. Use when a door won't stay closed or the machine won't start. What it does:

• Replaces a worn or broken door latch to restore secure door closure
• Helps ensure the appliance detects a closed door and can start cycles
• Commonly used when the door is loose, won't latch, or causes door-sensor errors
• Fits into the door strike area and engages the cabinet catch for a firm hold

• Locker lock (single replacement latch)

• Disconnect power and water supply before servicing to avoid shock or injury
• Remove the outer door panel or access cover as needed to reach the latch area
• Verify alignment of the latch and striker when reinstalling to ensure proper engagement

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

Replacement mounting screw for dishwashers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

This is a replacement mounting screw designed for securing appliance panels and components where the original fastener is customized for fit. It restores proper attachment and helps reduce rattling or loose parts. What it does:

• Secures panels, brackets or components to maintain proper alignment and operation
• Replaces missing or stripped fasteners that can cause vibration or noise
• Matches the appliance's customized fastener locations for correct fit
• Helps prevent further wear or damage from loose parts when properly installed

• Disconnect power and unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Replace like-for-like; use the same screw type and length for secure fastening
• Inspect and repair damaged mounting holes or threads before reinstalling

Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.

The Cover Assembly is an OEM component specifically designed for LG dishwashers. This assembly consists of the outer tub cover and inner mounted components that protect internal mechanisms.

Causes of a bad cover assembly can include cracks, dents, or other physical damage from regular loading and unloading of dishes. Harsh or abrasive cleaners can degrade protective surfaces over time as well. 

Symptoms of a bad cover assembly include:

• Water leaks inside or outside the dishwasher 
• Loose, unstable, or damaged outer tub cover
• Detached or broken mounting clips for inner components

This OEM LG part is also compatible with Sears/Kenmore dishwashers. Replacing the entire cover assembly restores integrity to protect sensitive inside parts. Proper maintenance extends the lifespan of exterior components.
 

This door boot gasket seals the opening between the door and tub on front-load washers, keeping wash water contained. Replacing a worn boot restores a tight seal to prevent leaks and ensure proper door closure.

• Creates a watertight seal between the washer door and front tub
• Helps prevent leaks, drips, and moisture at the front of the machine
• Common signs of failure: visible tears/cracks, persistent mildew, clothes snagging, or the door not sealing flush
• Restores correct door sealing to maintain efficient wash performance

• Unplug the washer and turn off water supplies before servicing
• Remove the outer and inner spring/clamp rings; note orientation of the gasket and drain port
• Lightly soap the lip to ease installation and align the drain/weep holes at the 6 o'clock position
• Reinstall clamps securely and run a short cycle to check for leaks

This blower cover is the outer housing piece that directs airflow from the blower assembly and protects the fan motor and internal components. It helps maintain proper airflow path and reduces contact with moving parts. What it does:

• Directs and channels airflow from the blower to the unit's vents for efficient circulation
• Protects the blower wheel and motor from debris and accidental contact
• Helps reduce rattling and vibration when the cover is intact and properly seated
• May cause decreased airflow or unusual noise if cracked, warped, or missing

• Disconnect power to the appliance before performing any service
• Typically installed with a few screws or clips after removing the front grill or access panel
• Handle plastic tabs gently to avoid breakage; align clips before tightening fasteners

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

The Drain Hose Assy is an OEM component specifically designed for LG dishwashers. This hose works with the drain pump to effectively drain wash water from the dishwasher tub after each cycle. 

The drain hose assy is responsible for efficiently draining wash water during and after the dishwashing cycle. It allows used water to be drained properly, keeping the dishwasher tub and components clean and dry between cycles. 

Symptoms of a bad drain hose assy include:

• Incomplete draining of wash water after cycles
• Water remaining or pooling in the bottom tub 
• Leaks or puddling near the drain pump or hose area
• Loud noises or vibrations from the drain pump

This OEM LG part is also compatible with select Sears/Kenmore.

Creates a watertight seal around the dishwasher tub opening. Replace if you notice leaks, excess noise, or poor wash performance. Confirm fit with your model.

This hose connector links two components in the appliance's water path to create a flexible, leak-resistant connection. Replacing a worn or cracked connector helps stop leaks and restore proper water flow and performance.

• Joins fittings or assemblies within the internal water system
• Maintains a watertight seal under normal operating pressure
• Helps resolve leaks, pooling, or related error codes/performance issues
• Common failure signs: visible cracks, swelling, brittleness, or a loose fit at the connection points

• Disconnect power and shut off the water supply before servicing
• Note hose routing and orientation; take a photo for reference
• Transfer and correctly position any clamps; tighten securely without over-tightening
• After installation, run a test and inspect all joints for leaks

Fix dishwasher electrical issues with this wire harness connector assembly. Restores secure electrical connections between internal components.

The Drain Hose Assembly is an OEM component specifically designed for LG dishwashers. It safely directs wash water and waste from the dishwasher to a drain source such as the garbage disposal or vent pipe after each wash cycle.

Causes of failure typically include wear and tear over multiple years of daily use carrying hot, soapy water. Hoses can become weakened from kinking, impact damage or deterioration of plastics from chemical exposure. 

Symptoms of a bad drain hose include:

• Puddles or water leakage from the dishwasher 
• Inability to fully drain all wash water after cycles
• Damp containers inside from standing water issues

This OEM LG part is also compatible with select Sears/Kenmore dishwashers.

Lower rack assembly for dishwashers. Holds dishes, utensils, and cookware during wash cycles. Replace if cracked, broken, or wheels are worn or missing.

Replacement upper rack assembly for dishwashers. Restores secure dish and glassware support when original rack is damaged, bent, warped, or missing.

Door hinge for dishwashers. Connects door to main frame for smooth opening and closing. Replace if hinge is cracked, bent, or loose causing door misalignment.

Replace a cracked or broken dishwasher door hinge. This connector piece allows the door to swing open and closed smoothly during loading and unloading.

Replacement roller for dishwasher lower rack. Installs on the dishrack axle to enable smooth gliding. Replace if cracked, broken, or missing.

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

The Holder is an OEM part for  LG dishwashers. It is a mounting bracket or clip located inside the dishwasher that securely holds racks, baskets and other accessories in place during wash cycles. The holder plays a supporting role, making sure dishes and utensils are stabilized for cleaning.

Causes of a bad holder typically include breakage or cracks in plastic mounting clips from repeated uses. Fatigue of metal brackets may also occur over time due to vibrations.

Symptoms of a bad holder can include:

• Accessories that no longer stay firmly fixed in position during the wash cycle
• Items may dislodge or racks may become loose

This LG part is also compatible with some Kenmore models.

Secures tine rows to dishwasher rack assembly. Replace if clip is cracked, broken, or missing, causing tines to become loose and unable to hold dishes properly.

Upper dish rack assembly for dishwashers. Holds dishes during wash cycles. Replace if rack is cracked, broken, or prongs are damaged or missing.

This replacement parts assembly restores the original sub-assembly function in compatible LG appliances, letting the appliance operate as designed. Use it when a worn or damaged internal assembly is preventing normal operation. What it does:

• Replaces a damaged or worn internal sub-assembly to restore proper operation
• Addresses symptoms such as intermittent operation, a component not responding, or unusual noises coming from the affected area
• Restores mechanical or electrical connections within the appliance where this assembly is used
• Useful when disassembly reveals broken clips, connectors, or mounting features on the original part

• Disconnect power and water (if applicable) before beginning any repair
• Keep all mounting hardware and connectors; some may need to be reused

The Tine Row Holder is an OEM part for LG dishwashers. It is a molded plastic bracket located inside the dishwasher that firmly holds the horizontal tine rows of the upper spray arm assembly in place. Subject to vibrations during the wash cycle, the tine row holder must securely grip this assembly.

Symptoms of a bad tine row holder include:

• Loosened or detached upper spray arm that causes insufficient washing 
• Rattling noises from loose components inside the tub 
• Potential leaks if the plastic material cracks fully over time

Causes of failure can include cracking of the holder plastic from solvent exposure and mineral buildup over thousands of wash cycles. Replace with this OEM LG part to ensure balanced water distribution to all areas of dishes. It is also compatible with Sears/Kenmore dishwasher models.

Replace broken or missing tines in your dishwasher's dish rack. This component supports and secures dishes during wash cycles. Easy replacement part.

The Noise Filter Assembly is an OEM part for LG dishwashers. It is designed to reduce electrical noise and interference that can affect the dishwasher's operation. The noise filter helps ensure that the electronic components function smoothly and without disruption, contributing to the overall efficiency and reliability of the appliance.

Causes of a bad noise filter assembly can include electrical surges, wear and tear over time, or damage due to moisture or physical impact.  

Symptoms of a bad noise filter assembly include:

• The dishwasher not starting or stopping unexpectedly
• Error codes related to electrical issues
• Intermittent power loss during a cycle
• Unusual noises coming from the control panel area

This OEM LG part is also compatible with some Kenmore models.

Replace broken or missing tines in your dishwasher's dish rack. This prong holds and spaces dishes securely during wash cycles. Ideal for cracked tines.

Incudes latch and safety switches.

Replace your dishwasher door gasket to stop leaks and restore a watertight seal. Install when water escapes during cycles. Confirm fit with your model.

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

This wire rack provides a sturdy shelf surface for holding cookware or items inside the appliance, restoring proper storage and airflow. It replaces worn, bent, or missing racks so shelves sit level and cooking or storage functions return to normal. What it does

• Provides a stable shelf surface for cookware, bakeware, or stored items
• Replaces racks that are bent, rusted, or no longer supporting weight
• Restores correct spacing and airflow where the rack is used
• Helps stop items from sliding or tipping due to damaged shelving

• One wire rack

• Turn off and unplug the appliance before installing to avoid injury
• Remove any contents and existing damaged rack before installing the replacement
• Slide the rack into the track or support brackets until it sits securely and level
• If edges are sharp or mounting clips are damaged, replace clips or handle with care

Upper rack assembly for dishwashers. Installs in the top position to hold cups, glasses, and small dishes. Replace if cracked, broken, or wheels are worn.

Replacement dishwasher rack restores storage space when your original is cracked, bent, or broken. Supports dishes and cookware securely for proper organization.

Replaces damaged, bent, or broken upper dishwasher rack. Holds dishes, cups, and small items securely for organized loading and better spray access.

This water guide directs and supports water flow inside the refrigerator to the dispenser or ice-making path, helping ensure consistent delivery and reducing misdirected leaks. It's a small plastic channel used where tubing or water needs routing. What it does

• Guides and stabilizes the water flow path between the supply tubing and dispenser or ice-maker components
• Helps prevent water from spraying or pooling by keeping the line aligned
• Can stop intermittent leaks caused by misrouted tubing or broken guide clips
• Reduces vibration-related noise by supporting tubing in place

• One water guide

• Disconnect power and turn off the water supply before installing
• Replace only with the exact replacement part; inspect adjacent tubing and seals while open
• Handle the guide gently to avoid cracking the plastic; use basic hand tools only

Dishes not getting clean or water not spraying properly? This dishwasher nozzle assembly sprays water during wash cycles. Moderately easy DIY repair.

Support bracket that secures internal components to the dishwasher chassis. Replace if bracket is cracked, broken, or missing to restore proper alignment.

The Control Board Assembly is an OEM replacement part for LG dishwashers. As the central electronic control unit, it governs all dishwasher functions like wash cycles, heating, water inlet and drainage. The control board receives inputs from sensors to power relays, motors and send output signals accordingly.

Symptoms of a faulty control board include:

• Failure to start or complete cycles 
• Inoperative or faulty display/buttons
• Unusual noises from improperly regulated components  
• Inability to sense soil levels or temperature accurately

Common causes are moisture damage, loose connections leading to shorts, and standard wear over time under high-heat working conditions.

This authentic LG part is also compatible with select Kenmore brands. 

The Control Panel is an OEM part for LG dishwashers. It is the interface that allows users to select and control various washing cycles and settings on the dishwasher. The control panel includes buttons or a touchpad that sends signals to the dishwasher's main control board, ensuring the correct operation of the appliance.

Causes of a bad control panel can include electrical malfunctions, physical damage to the buttons or touchpad, or wear and tear from frequent use. Moisture intrusion or accidental impacts can also contribute to the failure of the control panel.

Symptoms of a bad Control Panel include:

• Unresponsive buttons or touchpad
• Inability to select or change cycles
• Error messages or flashing lights
• The dishwasher not starting or stopping unexpectedly

This OEM LG part is also compatible with Sears/Kenmore.

The Dishwasher Inlet Valve is an OEM part for LG dishwashers. This valve controls the flow of water into the dishwasher, opening to allow water in at the start of the wash cycle and closing to prevent any further water entry once the desired level is reached. It ensures that the dishwasher receives the correct amount of water for optimal cleaning performance.

Causes of a bad inlet valve can include mineral deposits or debris clogging the valve, electrical issues, or general wear and tear from prolonged use. A malfunctioning valve can lead to improper water levels and potential flooding.

Symptoms of a bad dishwasher inlet valve include:

• The dishwasher not filling with water
• Water entering the dishwasher even when it is turned off
• Incomplete or prolonged wash cycles
• Leaks or puddles of water under the dishwasher

This OEM LG part is also compatible with Sears/Kenmore models.

Guides dishwasher rack smoothly along its track. Replace if racks stick, wobble, or derail during loading. Confirm fit with your model number.

A replacement damper assembly that controls airflow between compartments to help the refrigerator maintain proper temperatures. Restores the air pathway so the fresh food and freezer sections cool more consistently. What it does:

• Regulates airflow between freezer and fresh-food compartments for balanced cooling
• Stops or reduces abnormal clicking or air-flap noises when the damper motor is stuck
• Re-establishes proper airflow after a damaged or broken damper prevents opening/closing

• Disconnect power before beginning work to avoid electrical shock
• Handle surrounding trim and shelves carefully; some panels may need removal to access the damper
• Verify fit and orientation against the original part; do not force the new assembly into place

Cabinet base for dishwasher. Provides structural foundation and support for the unit. Replace if cracked, damaged, or warped to restore stability.

The Leg is an OEM part for LG dishwashers. It serves as a critical base component that elevates the dishwasher body above the floor for proper drainage. Legs are constructed with durable corrosion-resistant materials and adjustable height features to accommodate most flooring types. 

Symptoms of a bad leg can include:

• The dishwasher wobbles or is uneven during operation
• Standing water or improper draining of wash water  
• Visible damage like cracks, bending, or rust affecting stability

Causes of leg failure typically arise from normal wear over extended use of hard flooring. Replacing deteriorated legs restores the appliance's security and balance for optimum performance.

This affordable OEM LG part ensures the dishwasher stays firmly in place during cycles while conveniently adjusting to most installation situations. It provides customers with many more trouble-free years of use. This replacement leg is also compatible with KitchenAid models.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.