Parts for Lg LSDF9962ST/00: Base Assembly Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

This refrigerator damper assembly opens and closes the air passage between the freezer and fresh food sections. Replacing a sticking or broken damper restores proper airflow and more stable temperatures, helping resolve warm spots or food freezing in the refrigerator.

• Regulates cold-air flow from the freezer into the refrigerator to maintain set temperatures
• Operates a flap within the air duct under control of the appliance's control system
• Helps reduce temperature fluctuations and improve overall cooling performance

• Disconnect power before servicing
• Access from inside the fresh food compartment; remove shelves and the damper/duct cover
• Remove mounting screws and disconnect the wire harness; transfer any foam seals or clips from the old unit if needed
• Seat the gasket evenly to prevent air leaks and route wiring away from the moving flap

Closes off the bottom of the dishwasher cabinet to protect internal components. Replace if the panel is cracked, missing, or won't stay secured.

Replace a cracked, broken, or clogged dishwasher spray arm nozzle assembly. Installs inside the tub to direct wash water through jets for coverage.

Replace your dishwasher's nozzle assembly if it's broken, cracked, or keeps falling off. Installs on the spray arm to direct water during wash cycles.

The Guide Assembly is an OEM part for LG dishwashers. It directs water from the pump to the middle spray arm, ensuring that water is evenly distributed to clean dishes effectively on the upper racks.

Causes of a bad manifold guide can include wear and tear, accumulation of debris, or damage from heavy items in the dishwasher. A malfunctioning manifold guide can lead to poor cleaning performance and inefficient water distribution.

Symptoms of a bad middle spray arm manifold guide assembly include:

• Dishes on the upper rack not being cleaned properly
• Reduced water pressure from the middle spray arm
• Visible cracks or damage to the manifold guide
• The spray arm not rotating correctly

This OEM LG part is also compatible with Sears/Kenmore models.

Lower dish rack assembly for your dishwasher. Replaces a cracked, rusted, warped, or broken lower rack with damaged or missing tines and wheels.

Replacement handle for dishwasher dishrack. Installs on the upper or lower rack edge. Order when your existing handle is cracked, broken, or missing.

Replace your broken or loose dishwasher door handle to restore proper opening and closing. Direct fit replacement part for multiple LG dishwasher models.

Replacement handle for dishwasher dishrack. Installs on the front edge of the upper or lower rack. Needed when original handle is cracked or broken.

Replacement silverware basket for your dishwasher's lower rack. Holds cutlery during wash cycles. Replace if cracked, broken, or has holes in bottom.

Fix dishwasher electrical failures with this wire harness assembly. Connects control boards, motors, and sensors. Moderate difficulty repair (30-45 min).

Replacement drain hose assembly for dishwashers. Directs used water from the tub to your drainage system. Replace if cracked, leaking, or brittle.

The Rack Assembly is an OEM replacement part for LG dishwashers. It is the lower dish rack used to store and hold dishes during all wash cycles.

Causes of a faulty rack assembly can be damage such as cracks or broken wires, especially after extended use or improper loading that puts excess strain on the components.

Symptoms of a bad rack assembly include:

• Difficulty positioning racks securely due to failure points
• Rattling or loose racks during operation
• Inability to hold heavier dish loads securely

This OEM LG replacement part is also compatible with some Sears/Kenmore models.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

The Rack Assembly is an OEM replacement part for LG dishwashers. It is the lower dish rack used to store and hold dishes during all wash cycles.

Causes of a faulty rack assembly can be damage such as cracks or broken wires, especially after extended use or improper loading that puts excess strain on the components.

Symptoms of a bad rack assembly include:

• Difficulty positioning racks securely due to failure points
• Rattling or loose racks during operation
• Inability to hold heavier dish loads securely

This OEM LG replacement part is also compatible with some Sears/Kenmore models.

Replacement roller for dishwasher lower rack. Installs on the dishrack axle to enable smooth gliding. Replace if cracked, broken, or missing.

Replacement dishwasher holder secures internal components in proper position. Needed when original is cracked, broken, or missing causing rattling.

The Rack Holder is an OEM part for LG dishwashers. This component is designed to fit on the dishrack and functions as an attachment point for the roller wheels. It facilitates smooth movement of the dishrack in and out of the dishwasher.

Over time, the rack holder can wear out or become damaged due to regular use, heavy loads, or accidental impact. Corrosion from moisture exposure or broken clips can also affect the holder's performance.

Symptoms of a bad rack holder include:

• Dishwasher racks not sliding in and out smoothly
•  Racks tilting or collapsing during loading or operation
• Unusual noises from the rack area when moving the racks
• Difficulty in securing the racks within the dishwasher

Causes of a bad rack holder can include wear and tear from regular use, physical damage due to heavy or improperly loaded racks, and corrosion or rust from prolonged moisture exposure.

This OEM LG part is also compatible with Sears/Kenmore models.

Small mounting bracket that secures internal dishwasher components in place. Replace if cracked, broken, or missing to stop rattling and maintain alignment.

Upper rack assembly for LG dishwashers. Replace when rack shows rust, cracked welds, broken rollers, or warped frame. Includes tines and mounting hardware.

The Upper Rack Assembly is an OEM part for LG dishwashers. This part provides a durable and efficient space for washing glasses, cups, and smaller dishes. This assembly maximizes the cleaning capacity of your dishwasher, allowing for the organized placement of items to ensure they are thoroughly cleaned and dried.  

Causes for issues with the upper rack assembly often involve prolonged exposure to water and detergent, leading to rust or corrosion, physical damage from loading or unloading, or wear and tear from regular use.

Symptoms of a malfunctioning Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• Rust or corrosion that can lead to stains on dishes
• Broken or missing tines affecting the rack's ability to hold dishes securely

This OEM LG part is also compatible with some Kenmore models.

Dishwasher dishrack roller and axle assembly. Installs on upper or lower dish rack to allow smooth gliding. Replace if broken, cracked, or missing.

Rack guide assembly for dishwashers. Mounts to the side of the tub to help guide dish racks smoothly along the rails. Replace if cracked, broken, or missing.

Supports and guides your dishwasher drawer for smooth opening and closing. Replace when drawer sticks, misaligns, or won't slide properly. Confirm fit.

Color: blue. It measures about 3 inches wide by 1 inch high.

Mounting bracket that secures dishrack components in place inside your dishwasher. Replace if cracked, broken, or missing to restore stability.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.