Parts for Bosch SHV68E13UC/32: Base Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Dishwasher not filling with water or leaking? The aquastop valve prevents floods by shutting off water supply. Moderate DIY repair in 30-60 minutes.

Leaking water around the inlet valve? This rubber inlet seal creates a watertight connection at your dishwasher's water inlet to stop drips and leaks.

Connection piece for dishwasher installation. Replace this component if your original is cracked, broken, or missing to ensure proper connections.

Channels wastewater from your dishwasher to the household drain. Replace if brittle, cracked, clogged, or leaking to restore proper drainage.

Spring-style hose clamp secures water hoses to prevent leaks at connections. Replace if worn, rusted, or if you notice dripping around hose fittings.

Small precision insert that secures and aligns mating components in your dishwasher. Replace when worn, cracked, or missing to restore proper fit.

Dishwasher bottom case base assembly forms the lower enclosure protecting internal components. Replace if cracked, broken, or damaged to restore stability.

Leveling foot that installs at the base of your dishwasher to adjust height and keep it stable. Replace if cracked, broken, worn, or missing.

This replacement spring restores proper tension in the specific mechanism it supports, helping the connected component operate smoothly. A worn or broken spring can cause weak action, poor latching, or parts that won't return or stay in position.

• Provides controlled tension/return force for moving parts per your model's design
• Helps doors, lids, latches, or dispenser mechanisms open/close or release reliably
• Symptoms of failure can include weak or uneven tension, components not staying shut/open, or sluggish operation
• Replace if the spring is stretched, broken, deformed, corroded, or missing

• Disconnect power and shut off water supply before servicing
• Note the spring's orientation and anchor points; take a photo for reference
• Use needle-nose pliers for removal/installation and avoid over-stretching
• If your model uses paired springs, replace both to maintain balanced tension

This float switch assembly detects the water level inside the dishwasher tub and signals the control board to stop filling when the correct level is reached. It acts as an overfill protection device to prevent water from flooding out of the machine. Replace this switch if the dishwasher overfills, does not fill with water at all, or triggers error codes related to water level sensing.

This float switch assembly detects the water level inside the dishwasher tub and signals the control board to stop filling when the correct level is reached. It acts as an overfill protection device to prevent water from flooding out of the machine. Replace this switch if the dishwasher overfills, does not fill with water at all, or triggers error codes related to water level sensing.

Fix dishwasher spray arm not rotating with this spindle shaft. Restores proper water distribution when the rotating shaft is worn or broken.

Door hinge for dishwashers. Secures and supports the door during opening and closing. Replace if cracked, broken, or worn to restore proper door function.

Connects the dishwasher door hinge to the tension spring to counterbalance door weight. Replace if cable is frayed, broken, or detached from spring.

Plastic bushing that guides and supports the dishwasher door hinge assembly. Replace if cracked, broken, or worn causing noisy or misaligned door movement.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

The Dishwasher Hinge Lever is an OEM replacement part for Bosch dishwashers. This hinge lever is crucial for the operation of the dishwasher door, supporting smooth movement as it opens and closes. It works alongside the door springs to provide balanced tension, ensuring that the door stays securely in place when opened or closed. 

Over time, hinge levers may wear out due to regular use, strain from overloading the door, or corrosion from prolonged exposure to moisture. A damaged hinge lever can disrupt the door’s movement, leading to issues with opening, closing, or improper sealing of the dishwasher door.

Symptoms of a bad Dishwasher Hinge Lever include:

• Difficulty opening or closing the dishwasher door
• The door dropping open without resistance
• A loose or sagging door that won’t stay securely in place
• Unusual noises when moving the door 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Dishwasher cover component for protecting internal parts. Replaces cracked, broken, or missing covers. Essential for proper appliance assembly.

Guides door cables for smooth opening and closing. Replace if cracked, broken, or worn. Keeps cables aligned and ensures balanced door operation.

Replace your dishwasher's door hinge if it's cracked, broken, or worn. This hinge attaches the door to the cabinet frame and allows smooth opening.

Replacement door hinge that restores proper alignment and pivot support. Needed when original is cracked, worn, or causing door sagging and uneven closing.

Dishwasher indicator light not working or staying on? This light signals cycle status and alerts. Common fix for control panel display issues.

This junction box kit includes a power cord and wiring connections used to supply electrical power to the dishwasher. It mounts beneath the dishwasher and provides a safe, enclosed connection point between the household wiring and the appliance. Replace this kit if you notice a damaged or frayed power cord, loose wiring connections, or if the dishwasher intermittently loses power or won't turn on.

Fix dishwasher control panel not responding or display errors with this cable harness. Restores electrical connections between controls and sensors.

Replacement mounting hardware kit for securing dishwasher panels and components. Includes fasteners and clips to restore proper support and stability.

Protective base panel for dishwashers that covers internal components and provides a finished appearance. Replace if cracked, damaged, or discolored.

Lower front trim panel that covers the kick area of your dishwasher. Replace if cracked, broken, or missing to restore a finished appearance.

This base panel is the lower access kickplate that covers and protects the appliance's underside components while keeping a finished look at the front. It restores protection and appearance after damage or corrosion. What it does:

• Covers the appliance's lower front area to protect wiring, motors and other internal parts from debris
• Helps prevent drafts and keeps the cabinet base looking finished
• Common symptom: cracked, bent or missing lower panel exposing components
• Common symptom: rattling or scraping noises from loose or damaged kickplate
• Common symptom: cosmetic damage or rust on the lower front of the appliance

• One base panel

• Disconnect power (and water, if applicable) before beginning any work
• Typically installs from the front with a few screws or clips; small hand tools are usually required
• Handle edges carefully—metal panels can have sharp edges
• Secure all fasteners before returning the appliance to service

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.