Parts for Bosch SGE68U55UC/B3: Base Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

The Prolongation is an OEM replacement part for Bosch dishwashers that connects the dishwasher to the water supply, allowing for the proper filling of water during the wash cycles. It ensures a secure and leak-free connection between your dishwasher an

Dishwasher not filling with water or leaking? The aquastop valve prevents floods by shutting off water supply. Moderate DIY repair in 30-60 minutes.

Leaking water around the inlet valve? This rubber inlet seal creates a watertight connection at your dishwasher's water inlet to stop drips and leaks.

Connection piece for dishwasher installation. Replace this component if your original is cracked, broken, or missing to ensure proper connections.

If your dishwasher has water leaking from the base or won't fill, the aquastop valve may need replacement. Regulates water flow and prevents leaks.

The Adapter is an OEM part for Bosch dishwashers. It is used to connect the dishwasher water inlet hose to the internal water supply component. Proper sealing and connections are critical for leak-free dishwasher operation.

Causes of a bad

Channels wastewater from your dishwasher to the household drain. Replace if brittle, cracked, clogged, or leaking to restore proper drainage.

Spring-style hose clamp secures water hoses to prevent leaks at connections. Replace if worn, rusted, or if you notice dripping around hose fittings.

Small precision insert that secures and aligns mating components in your dishwasher. Replace when worn, cracked, or missing to restore proper fit.

Dishwasher bottom case base assembly forms the lower enclosure protecting internal components. Replace if cracked, broken, or damaged to restore stability.

Replacement leveling foot for dishwashers. Stabilizes and balances your appliance. Replace if cracked, worn, broken, or missing to restore proper positioning.

Replacement door spring for dishwashers. Installs on the door hinge assembly to assist with opening and closing. Needed when original is broken or worn.

E15 or E16 error code? The water level float detects leaks in the base pan. Simple DIY fix with video guide—typically takes 30-45 minutes to replace.

Fix a dishwasher that won't start or runs with the door open. This door switch restores proper door detection so your unit starts and stops reliably.

Fix dishwasher spray arm not rotating with this spindle shaft. Restores proper water distribution when the rotating shaft is worn or broken.

Leveling foot that installs at the base of your dishwasher to adjust height and keep it stable. Replace if cracked, broken, worn, or missing.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Structural support hinge for your dishwasher door. Installs on the side panel to allow smooth opening and closing. Replace if cracked or broken.

Connects the dishwasher door hinge to the tension spring to counterbalance door weight. Replace if cable is frayed, broken, or detached from spring.

Plastic bushing that guides and supports the dishwasher door hinge assembly. Replace if cracked, broken, or worn causing noisy or misaligned door movement.

The Dishwasher Hinge Lever is an OEM replacement part for Bosch dishwashers. This hinge lever is crucial for the operation of the dishwasher door, supporting smooth movement as it opens and closes. It works alongside the door springs to provide balance

Guides door cables for smooth opening and closing. Replace if cracked, broken, or worn. Keeps cables aligned and ensures balanced door operation.

Replacement dishwasher door hinge that restores smooth opening and closing. Installs on the door frame to support and pivot the door. Needed when hinge is cracked, broken, or worn causing misalignment.

Replacement door hinge that restores proper alignment and pivot support. Needed when original is cracked, worn, or causing door sagging and uneven closing.

This electronic control module manages the appliance's automatic functions and user commands, restoring proper cycle selection and timing for reliable operation. Replace a failed control board to regain normal program control and display responsiveness. What it does:

• Interprets user inputs and runs selected programs so cycles start and finish correctly
• Controls motors, valves, pumps, heaters and timing signals according to selected cycles
• Manages display and indicator feedback; can stop unresponsive or blank-control symptoms
• Replaces a board that causes intermittent operation, error codes, or failure to start

• High-level replacement; disconnect power and water before servicing
• Handle the board by edges and avoid static discharge; use proper ESD precautions
• Verify connector fit and wire routing before powering appliance

Fix a dishwasher that won't start, won't advance cycles, or shows error codes with this control module. Replaces faulty electronic controls.

Replacement power cord for dishwashers. Connects appliance to wall outlet. Replace if cord is cracked, damaged, burned, or missing from unit.

Fix dishwasher not starting or control panel issues with this cable harness. Connects electrical components for proper operation. Moderate DIY repair.

Replacement mounting hardware kit for securing dishwasher panels and components. Includes fasteners and clips to restore proper support and stability.

Protective base panel for dishwashers that covers internal components and provides a finished appearance. Replace if cracked, damaged, or discolored.

Covers the lower front area of your dishwasher to protect internal components and restore a finished look. Replace if cracked, dented, or missing.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.