Parts for Kitchenaid 9KSM3311XVB0: Base And Pedestal Unit Parts

Replacement mounting screw for stand mixers. Secures panels, brackets, and internal components. Needed when original is missing, stripped, or damaged.

This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.

• Provides the correct 8-32 thread and 5/8-inch length where specified
• Secures sheet-metal panels, brackets, and internal assemblies
• Replaces missing, stripped, or corroded screws
• Symptoms include loose or rattling panels, misaligned parts, or hardware that won't stay tight

• Disconnect power; shut off gas before servicing
• Support panels/components while removing or installing hardware
• Start threads by hand to avoid cross-threading; tighten only until snug
• Match the original screw's location and orientation for proper fit

This pedestal raises your front-load laundry appliance to a more comfortable height and adds a convenient storage drawer for laundry essentials. It restores proper fit and access when the original pedestal is missing or damaged. What it does:

• Provides a stable base to raise the washer or dryer for easier loading and unloading
• Includes a built-in storage drawer to hold detergents, dryer sheets, and small supplies
• Helps correct misalignment or instability caused by a cracked or broken pedestal
• Commonly used when the factory pedestal is cracked, dented, or no longer secures the appliance

• Designed for front-loading laundry appliances; follow OEM instructions for secure mounting
• Lift with help—pedestal and appliance can be heavy; avoid pinched fingers
• Disconnect power before moving appliances and ensure unit is level after installation
• If screws or brackets are missing from your kit, before assuming compatibility

This pedestal is the appliance base that raises a front-load washer or dryer for easier loading and provides a stable, elevated platform. It helps reduce bending and can add a small storage drawer for supplies. What it does:

• Raises the appliance to improve ergonomics and make loading/unloading easier
• Provides a stable platform to help keep the appliance level
• Often includes a storage drawer for laundry supplies
• Helps reduce strain when reaching into the washer or dryer

• One pedestal/storage base as specified by the OEM part number

• Disconnect power and water before installation
• Empty the appliance and have two people lift/move units to avoid injury
• Follow the OEM installation instructions and use recommended fasteners
• Do not modify the pedestal or appliance

This pedestal elevates a front-load washer or dryer to make loading and unloading easier and reduce bending. It provides a stable, level platform that positions the appliance at a more comfortable height. What it does:

• Raises the appliance to improve access and ergonomics during loading and unloading
• Creates a stable platform to help maintain proper appliance alignment
• Helps reduce strain from bending over to reach the drum or controls
• Designed to mount under the appliance using the factory attachment points

• One pedestal

• Disconnect power (and water supply for washers) before installing
• Follow the manufacturer's installation instructions and use proper fasteners
• Two-person lift recommended for safe placement and alignment

This pedestal raises a front-load laundry appliance for easier loading and unloading while adding stable support and useful storage under the machine. It restores proper ride height and helps reduce bending during laundry tasks. What it does:

• Raises and supports a front-load washer or dryer for more comfortable access
• Provides a shallow storage area for laundry supplies and small items
• Restores a damaged or cracked pedestal to eliminate wobble or uneven seating
• Helps protect the appliance base from floor-level impacts and debris

• Disconnect power and water and empty the appliance before lifting or moving it.
• Use two people to position the pedestal and appliance; pedestals and appliances are heavy and awkward.
• Follow the manufacturer's installation instructions and hardware requirements for secure mounting.

This pedestal raises and supports a front-load laundry appliance for easier loading and unloading while improving reach and ergonomics. It creates a stable, elevated base so you can load clothes without excessive bending. What it does:

• Elevates a front-load washer or dryer to reduce bending and make loading/unloading easier
• Provides a stable, level base to help keep the appliance steady during use
• Improves accessibility by raising controls and the door opening to a more comfortable height
• Helps protect the appliance from direct floor contact and minor spills

• Disconnect power and water to the appliance before installing
• Follow the manufacturer's installation instructions and use the correct mounting hardware
• Installation may require basic tools and two people to safely position and secure the appliance

This pedestal serves as the elevating base that raises a front-load laundry appliance for easier loading and unloading, improving ergonomics and creating a stable, elevated footprint. What it does:

• Raises the appliance height to reduce bending and make loading/unloading easier.
• Provides a stable base that helps keep the appliance level during operation.
• Helps protect the appliance underside from spills and floor debris.
• Can improve accessibility when pairing with other laundry storage solutions.

• Disconnect power (and water if applicable) before starting installation.
• Use two people to lift and position the appliance onto the pedestal to avoid injury or damage.
• Align and secure the appliance to the pedestal following the manufacturer's instructions.
• Check level and stability after installation; do not operate an unlevel appliance.

Rubber foot for stand mixers. Installs at the base to provide stability. Replace if worn, cracked, missing, or damaged to prevent mixer movement.

The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and promotes efficient drying performance.  

Causes of a bad retaining ring commonly involve compression loss of the rubber gasket material over many years of heating cycles. Exposure to petroleum-based cleaners may prematurely deteriorate the seal as well.

Symptoms of a failed 'E' ring include: 

• Gas leaks emitting foul odors around seams or vents   
• Reduced heat conductivity hampering dryer functioning
• Moisture accumulation shortens fabric lifespan  
•  Drafts compromising indoor air quality and energy bills

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

Coated flat beater attachment for 3.5 quart tilt-head stand mixers. Replace your worn, chipped, or missing beater for mixing batters and doughs.

This 6 Wire Whip incorporates air into ingredients for fluffy whipped cream, perfect for frostings and cakes with whipped egg whites. Fits KitchenAid 3.5 Quart Tilt Head models KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.

Coated C-dough hook attachment for stand mixers. Mixes and kneads yeast dough efficiently. Replace if worn, damaged, or missing. Top-rack dishwasher safe.