Parts for Kitchenaid KP2671KATRW: Base And Pedestal Unit Parts

Replacement rubber foot for stand mixers. Secures to the base to prevent movement and slipping during operation. Replace if cracked, worn, or missing.

If your mixer bowl won't stay in place or wobbles during mixing, this retainer clip secures it properly. Simple DIY fix takes just minutes to install.

Plastic lift arm that raises and lowers the mixing bowl on stand mixers. Replace if cracked, broken, or worn from frequent use and age.

Small flat washer for KitchenAid stand mixers. Installs between mechanical components to ensure proper spacing. Replace if worn, cracked, or missing.

This replacement spring restores proper tension and return action within the original mechanism of your appliance. Replacing a fatigued or broken spring helps moving parts operate smoothly and return to position for consistent, reliable performance.

• Supplies controlled tension within the assembly
• Returns levers or linkages to their neutral position after use
• Helps maintain proper alignment and engagement of moving parts
• Common signs of failure: weak/loose feel, parts not returning, intermittent operation, rattling or squeaking

• Disconnect power before service; also shut off gas/water
• Note original routing and attachment points; take a reference photo before removal
• Use needle-nose pliers or a spring tool; avoid overstretching the new spring
• Verify smooth manual movement before reassembly and testing

If your stand mixer bowl lift won't stay up or slips out of position, this spring roll pin secures the lift arm linkage. Requires pin punch to install.

Need an extra mixing bowl for batch cooking or quick ingredient swaps? This stand mixer bowl locks securely in place. Easy 5-minute swap—no tools needed.

Upgrade or replace your mixer's paddle with this coated flat beater in Silent Silver. It restores smooth, even mixing performance for everyday recipes and is designed in the narrow profile specified for select stand mixers.

• Blends ingredients thoroughly for batters, doughs, and mashed mixtures
• Direct replacement for a beater that is bent, chipped, peeling, or missing
• Narrow profile mates correctly with the intended mixer hub style

• Unplug the mixer before attaching or removing the beater
• Tilt the head up or lower the bowl; align the beater slot with the shaft pin, push up, and twist to lock
• Clean and dry per the manufacturer's care instructions before first use

Restore proper kneading performance with this stand mixer dough hook. Replaces a worn or missing hook so your mixer can fold and stretch dough evenly for breads, pizza, and other yeast-based recipes. What it does:

• Attaches to the mixer's beater shaft to knead and mix yeast doughs
• Folds and stretches dough for even ingredient incorporation and structure development
• Helps prevent overmixing with the correct tool for heavy doughs
• Replace if the hook is bent, cracked, or no longer locks securely
• Common symptoms include uneven kneading, dough not coming together, or the attachment wobbling

• 1 dough hook

• Unplug the mixer before installing attachments
• Align the hook on the beater shaft; push up and twist to lock (typical on most models)
• Clean and care for the attachment according to your model's instructions

Replace your bent, worn, or broken wire whip attachment for KitchenAid stand mixers. Essential accessory for whipping cream and egg whites. 5-quart capacity.

Pouring shield attaches to 5-6 quart lift bowl stand mixer to prevent ingredients from flying out while mixing. Replace if lost or damaged. Verify fit.

Pouring shield attaches to 5-6 quart lift bowl stand mixer to prevent ingredients from flying out while mixing. Replace if lost or damaged. Verify fit.

Fix a mixer that won't engage or slips during operation. This cam restores proper mechanical linkage timing. Straightforward DIY replacement part.

Replacement mounting screw for stand mixer panels, brackets, and trim. Secures internal components to keep parts aligned. Replace if missing, stripped, or rusted.

Mounting screw secures internal brackets and panels in mixers. Replace if missing, stripped, or damaged to prevent loose components and rattling.

Fix mixer parts that shift or make noise with this retaining ring. Snaps into groove to secure components on shaft. Takes under 20 minutes to install.

If your mixer's bowl lift handle is cracked or missing, this rotating handle restores convenient bowl access. Simple installation—no tools needed.

Black decorative panel for stand mixer housing. Replaces cracked, chipped, or discolored panels. Restores your mixer's appearance and finish.

This planetary gear assembly transfers motor motion to the washer's transmission so the tub or agitator moves correctly. Replacing a worn planetary restores proper agitation and helps stop grinding or intermittent motion. What it does

• Converts motor output into the rotational motion needed for the transmission or agitator.
• Restores smooth, reliable wash action when the original gears are worn or damaged.
• Commonly used when you hear grinding, clunking, or the washer fails to agitate or spin consistently.
• Works as an internal drive component that mates with the transmission and related drive parts.

• Disconnect power and water before beginning any repairs.
• Accessing this part often requires removing the cabinet, drive components, or transmission housing.
• Inspect surrounding seals, bearings, and fasteners; replace any damaged parts to prevent repeat failure.
• Test operation through a full cycle after installation to confirm correct function and no leaks.

This is the vertical column assembly with pins that serves as the main support structure for a stand mixer. It connects the mixer head to the base and allows the head to tilt or lock in position. Replace this assembly if the column is cracked, the pins are worn, or the mixer head wobbles and won't stay securely in place.

This is the column and pin assembly used in the ice maker mechanism. It provides structural support and alignment for the ice maker's internal components, helping guide moving parts during the ice ejection cycle. Replace this assembly if the column is cracked, pins are missing or worn, or the ice maker is failing to eject ice properly.

This base panel assembly includes the bottom plate and leveling feet that support the dishwasher and provide a finished appearance along the front bottom edge. It helps stabilize the unit and protects the underside components from dust and debris. Replace it if the base is cracked, warped, or if the leveling feet are broken, causing the dishwasher to rock or sit unevenly.

This is the base assembly for a stand mixer in onyx black, forming the bottom housing that supports the motor and drive components. It provides a stable foundation and keeps the mixer securely positioned during mixing operations. Replace this base if it is cracked, chipped, or cosmetically damaged, or if the mixer no longer sits level on the countertop.

This is the base assembly for a stand mixer, serving as the bottom housing that supports the motor and internal components. It provides structural stability and keeps the mixer securely positioned on the countertop during operation. Replace this base if it is cracked, broken, or if the mixer wobbles or vibrates excessively during use.

This is a support bracket used in a stand mixer. It provides structural reinforcement to hold internal components in their correct position during operation. Replace this bracket if the mixer vibrates excessively, feels unstable, or if internal parts have shifted out of alignment.

Stand mixer Rotor Slicer, Shredder Attachment for KitchenAid Stand Mixer that includes four stainless steel slicing, shredding cones, and instruction booklet. The slicers include course, thick, think and fine shredder to shred vegetables, fruit and nuts. KitchenAid model number RVS-A

If your stand mixer is making grinding noises or the beater won't turn, this planetary gear assembly restores proper drive function. Direct-fit part.

This gearcase is the washer transmission that transfers motor torque to the agitator and basket so the washer can agitate and spin properly. Replaces a worn or damaged gearbox to restore normal wash movement. What it does:

• Transfers drive from the motor to the agitator and outer basket for agitation and spinning
• Replaces stripped or noisy gears that cause grinding, clunking or loss of agitation
• Stops slipping or intermittent agitation caused by internal gear failure
• Helps eliminate unusual vibration or rough operation linked to a failing gearbox

• Disconnect power and turn off water supply before beginning service
• Requires partial disassembly of the washer cabinet and transmission area; follow OEM instructions
• May contain lubricant—inspect seals and surrounding components for leaks while installed

If your stand mixer makes grinding noises or won't mix properly, the lower gearcase may be worn. This part transfers motor power to the beaters.

If your stand mixer bowl isn't rotating or attachments won't spin, the planetary gear assembly may be worn. Moderately difficult repair requiring disassembly.

This planetary gear assembly transfers motor torque through the gearbox to drive the appliance's internal mechanism, restoring proper gear-driven motion and reducing slipping or grinding during operation. What it does:

• Re-meshes the motor output into the gearbox so driven components rotate smoothly
• Helps eliminate symptoms like noisy gearing, uneven movement, or loss of drive
• Restores proper gear engagement when worn or damaged planetary gears cause slipping
• Works as the internal gear cluster that distributes torque to downstream parts

• High-level replacement: remove power and access the gearbox or motor housing; replace the worn planetary assembly with the matching unit
• Use proper tools and follow the appliance service manual for disassembly/reassembly to avoid damaging seals or fasteners
• If gears were damaged, inspect mating gears, bearings, and shafts for wear before reassembly
• Dispose of damaged gears properly;

This is a bowl support assembly in imperial gray for a stand mixer. It secures the mixing bowl in place on the base of the mixer, ensuring stability during operation. Replace this part if the bowl wobbles excessively, the support is cracked or broken, or if the locking mechanism no longer holds the bowl firmly.

This is the base panel assembly with attached feet that forms the bottom structure of a stand mixer. It provides stability and support during mixing operations. Replace this assembly if the base is cracked, the feet are broken or missing, or the mixer wobbles and moves excessively during use.

This is the vertical column subassembly for a stand mixer, finished in empire red. It forms part of the main housing structure that supports the mixer head and internal drive components. Replace this part if the column is cracked, chipped, or cosmetically damaged and you want to restore the mixer's appearance and structural integrity.

White decorative column cover for stand mixers. Replaces cracked, chipped, or discolored housing on the mixer body. Restores cosmetic appearance.

This is a bowl support subassembly in empire red that secures the mixing bowl to the base of a stand mixer. It ensures the bowl stays firmly in place during mixing operations. Replace this part if your mixing bowl wobbles, won't lock into position, or comes loose while the mixer is running.

This is a metallic chrome bowl support assembly that holds the mixing bowl securely in place on a stand mixer. It includes the support bracket and locking pin that keep the bowl stable during operation. Replace this part if the bowl wobbles, does not lock into position, or if the support is cracked or bent.

This is a bowl support subassembly in onyx black that holds the mixing bowl securely in place on a stand mixer. It provides stable support so the bowl doesn't wobble or shift during mixing. Replace this part if your mixing bowl no longer locks into position, feels loose, or detaches during operation.

This is a structural column sub-assembly in onyx black that forms part of the dishwasher's internal housing framework. It provides support and alignment for adjacent components within the dishwasher cavity. Replace this part if the column is cracked, warped, or broken, which can cause misalignment of racks, door components, or other internal parts.

This is the upper machine housing for a stand mixer. It forms the main structural shell that encloses the motor and internal drive components. Replace this housing if it is cracked, damaged, or if internal components are no longer held securely in place.

This is the upper motor housing for a stand mixer, finished in Empire Red porcelain enamel. It encloses and protects the motor and internal drive components of the mixer. Replace this housing if it is cracked, chipped, or damaged, which can expose internal parts to debris and compromise the appearance and structural integrity of the mixer.

This is the upper motor housing shell for a stand mixer, finished in metallic chrome. It covers and protects the internal motor and gearing components while giving the mixer its exterior appearance. Replace this housing if it is cracked, chipped, or cosmetically damaged, or if the housing no longer fits securely onto the mixer body.

A white replacement bowl support that centers and stabilizes the appliance bowl or glass tray to reduce wobble and noise, helping restore smooth rotation and reliable operation. What it does:

• Centers and supports the bowl or glass tray to prevent off-center rotation and rubbing.
• Keeps the tray steady to reduce vibration and noisy operation.
• Helps the tray rotate smoothly for even heating or proper function.
• Common symptoms it can address: wobbling or off-center bowl/tray, noisy rotation, scraping or unstable tray movement.

• Disconnect power to the appliance before starting any work.
• Remove the bowl or glass tray and lift out the old support; inspect the drive hub or shaft for damage.
• Align the support over the hub/shaft and press into place until fully seated; do not force broken or warped plastic.

Fix grinding noise or slipping during mixing with a new lower gearcase. Transfers motor power to the rotating assembly. Moderate DIY repair.

If your stand mixer is excessively noisy or vibrating, the motor housing may be cracked or damaged. This white housing secures and protects the motor.

This is the outer motor housing shell for a stand mixer in an onyx black finish. It covers and protects the motor and internal components while giving the mixer its exterior appearance. Replace this housing if it is cracked, chipped, or cosmetically damaged.

If your mixer won't agitate properly or makes grinding noises, this planetary gear assembly transfers motor motion to restore mixing action.

Fix a broken planetary shaft or restore smooth mixing action. This planetary assembly links the gearcase to the beater shaft for consistent rotation.

Fix grinding noise or leaking grease with a new lower gearcase housing. Restores proper alignment and contains lubrication for quieter mixing.

Fix a mixer planetary that fell off or slipped down. This assembly holds the beater and rotates it around the bowl for thorough mixing. DIY repair.

Color: Metallic Chrome

If your mixer attachment falls off or makes clunking noises, the planetary assembly likely needs replacement. This is a 15-minute repair with basic tools.

Holds and rotates mixer attachments around the bowl. Replace if cracked, worn, bent, or falls out during operation. Includes housing and shaft.

Lubricates planetary gears in stand mixers. Replace when grease darkens, mixer makes noise, or after gear replacement. Confirm fit with your model.