Parts for Kitchenaid KP2671KATRW: Case, Gearing, Planetary Unit Parts

Covers and protects the attachment hub on your stand mixer. Replace if the original cap is cracked, missing, or worn for a finished look and protection.

Replacement thumb screw for stand mixer power hub. Secures beater, whisk, and dough hook attachments. Replace if cracked, broken, or missing.

The Transmission Housing is an OEM part for Whirlpool mixers. This component encases the transmission, which is responsible for transferring power from the motor to the mixing attachments. The housing ensures the transmission is protected from external damage and maintains the alignment and stability of internal components.

Over time, the transmission housing can become compromised due to regular use, exposure to food and moisture, or accidental impacts. Damage to this part can lead to misalignment, which affects the performance of the mixer.

Symptoms of a bad transmission housing include:

• Unusual noises during operation
• Mixing attachments not spinning properly
• Visible cracks or damage to the housing
• Leaking grease from the transmission area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Fix a mixer that won't run, starts at full speed then stops, or won't shift speeds properly. Replace the speed control board in about 30 minutes.

Hardware washer for stand mixer planetary assembly. Replace when worn or missing to secure gears, reduce vibration, and prevent rattling. Confirm fit.

The Pinion Gear is an OEM replacement part specific to KitchenAid stand mixers. It is a small gear located within the planetary mixing mechanism. The pinion gear works with the worm gear to power the planetary action that thoroughly mixes ingredients.

Symptoms of a bad pinion gear include:

• Uneven or incomplete mixing
• The mixing arm assembly failing to spin properly
• Grinding noises coming from the base of the mixer
• “Skipping” while under a load

Causes of a bad pinion gear can include cracked, worn, or broken teeth from heavy use over time. Food debris or other obstructions around the gear can damage it as well.

This OEM KitchenAid replacement is compatible with additional stand mixer models from brands like Kenmore, some Whirlpool, and Maytag mixers.

This is a snap retaining ring that holds the drum support roller in place on its shaft inside the dryer. It prevents the roller from sliding off the axle during operation. Replace this clip if the drum support roller is loose, the dryer makes thumping or rumbling noises, or if the original retaining ring is missing or damaged during a roller replacement.

The Gear is an OEM replacement part for Whirlpool stand mixers. Located inside the mixer head assembly, it transfers torque from the motor into rotary spinning of mixing attachments. Thorough blending and kneading depend on dependable gear movement.

Causes of gear failure include wear from extended use breaking down teeth, accumulated residue gumming up meshing parts, or impacts damaging vital cogs.

Symptoms include:

• Attachments failing to spin or rotating unevenly
• Grating sounds emanating from within the mixer
• Ingredients not fully incorporated as intended

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Mixer slipping or making loud grinding noises? This worm gear transfers motor power to attachments. Moderate DIY repair with cleaning required.

Mixer makes growling noise but beater won't spin? This steel retaining pin locks drive components in place. Moderate repair; disassembly required.

Fix a stand mixer that won't spin or makes grinding noises. This worm follower gear transmits power in the gearbox. DIY repair in 30-60 minutes.

If your mixer beater won't move or makes grinding noises, worn gears are likely the cause. This gear kit restores smooth operation. DIY-friendly repair.

If your mixer beater won't move or makes grinding noises, worn gears are likely the cause. This gear kit restores smooth operation. DIY-friendly repair.

This factory replacement screw fastens appliance components securely. Use it to replace lost, stripped, or corroded hardware and restore a snug, rattle-free fit and proper alignment of panels and assemblies.

• Secures panels, brackets, and internal components to their mounting points
• Replaces missing or damaged fasteners to maintain correct alignment
• Helps eliminate vibration and rattling caused by loose hardware
• Restores the original fit with OEM-matched threads and dimensions

• Disconnect power and shut off water or gas supplies before servicing
• Use the correct driver bit that matches the screw head to avoid stripping
• Replace one fastener at a time to keep parts aligned
• Tighten snugly; do not overtighten to prevent stripped threads or cracked plastic

This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.

• Provides the correct 8-32 thread and 5/8-inch length where specified
• Secures sheet-metal panels, brackets, and internal assemblies
• Replaces missing, stripped, or corroded screws
• Symptoms include loose or rattling panels, misaligned parts, or hardware that won't stay tight

• Disconnect power; shut off gas before servicing
• Support panels/components while removing or installing hardware
• Start threads by hand to avoid cross-threading; tighten only until snug
• Match the original screw's location and orientation for proper fit

Mixer making noise or shaft loose? This retaining ring locks gears in place on the drive shaft. Moderate DIY repair with snap ring pliers required.

Replacement mounting screw for stand mixer panels, brackets, and trim. Secures internal components to keep parts aligned. Replace if missing, stripped, or rusted.

Black decorative panel for stand mixer housing. Replaces cracked, chipped, or discolored panels. Restores your mixer's appearance and finish.

This planetary gear assembly transfers motor motion to the washer's transmission so the tub or agitator moves correctly. Replacing a worn planetary restores proper agitation and helps stop grinding or intermittent motion. What it does

• Converts motor output into the rotational motion needed for the transmission or agitator.
• Restores smooth, reliable wash action when the original gears are worn or damaged.
• Commonly used when you hear grinding, clunking, or the washer fails to agitate or spin consistently.
• Works as an internal drive component that mates with the transmission and related drive parts.

• Disconnect power and water before beginning any repairs.
• Accessing this part often requires removing the cabinet, drive components, or transmission housing.
• Inspect surrounding seals, bearings, and fasteners; replace any damaged parts to prevent repeat failure.
• Test operation through a full cycle after installation to confirm correct function and no leaks.

This is the vertical column assembly with pins that serves as the main support structure for a stand mixer. It connects the mixer head to the base and allows the head to tilt or lock in position. Replace this assembly if the column is cracked, the pins are worn, or the mixer head wobbles and won't stay securely in place.

This is the column and pin assembly used in the ice maker mechanism. It provides structural support and alignment for the ice maker's internal components, helping guide moving parts during the ice ejection cycle. Replace this assembly if the column is cracked, pins are missing or worn, or the ice maker is failing to eject ice properly.

Stand mixer Rotor Slicer, Shredder Attachment for KitchenAid Stand Mixer that includes four stainless steel slicing, shredding cones, and instruction booklet. The slicers include course, thick, think and fine shredder to shred vegetables, fruit and nuts. KitchenAid model number RVS-A

This base panel assembly includes the bottom plate and leveling feet that support the dishwasher and provide a finished appearance along the front bottom edge. It helps stabilize the unit and protects the underside components from dust and debris. Replace it if the base is cracked, warped, or if the leveling feet are broken, causing the dishwasher to rock or sit unevenly.

This is the base assembly for a stand mixer in onyx black, forming the bottom housing that supports the motor and drive components. It provides a stable foundation and keeps the mixer securely positioned during mixing operations. Replace this base if it is cracked, chipped, or cosmetically damaged, or if the mixer no longer sits level on the countertop.

This is the base assembly for a stand mixer, serving as the bottom housing that supports the motor and internal components. It provides structural stability and keeps the mixer securely positioned on the countertop during operation. Replace this base if it is cracked, broken, or if the mixer wobbles or vibrates excessively during use.

This is a support bracket used in a stand mixer. It provides structural reinforcement to hold internal components in their correct position during operation. Replace this bracket if the mixer vibrates excessively, feels unstable, or if internal parts have shifted out of alignment.

If your stand mixer is making grinding noises or the beater won't turn, this planetary gear assembly restores proper drive function. Direct-fit part.

This gearcase is the washer transmission that transfers motor torque to the agitator and basket so the washer can agitate and spin properly. Replaces a worn or damaged gearbox to restore normal wash movement. What it does:

• Transfers drive from the motor to the agitator and outer basket for agitation and spinning
• Replaces stripped or noisy gears that cause grinding, clunking or loss of agitation
• Stops slipping or intermittent agitation caused by internal gear failure
• Helps eliminate unusual vibration or rough operation linked to a failing gearbox

• Disconnect power and turn off water supply before beginning service
• Requires partial disassembly of the washer cabinet and transmission area; follow OEM instructions
• May contain lubricant—inspect seals and surrounding components for leaks while installed

If your stand mixer makes grinding noises or won't mix properly, the lower gearcase may be worn. This part transfers motor power to the beaters.

If your stand mixer bowl isn't rotating or attachments won't spin, the planetary gear assembly may be worn. Moderately difficult repair requiring disassembly.

This planetary gear assembly transfers motor torque through the gearbox to drive the appliance's internal mechanism, restoring proper gear-driven motion and reducing slipping or grinding during operation. What it does:

• Re-meshes the motor output into the gearbox so driven components rotate smoothly
• Helps eliminate symptoms like noisy gearing, uneven movement, or loss of drive
• Restores proper gear engagement when worn or damaged planetary gears cause slipping
• Works as the internal gear cluster that distributes torque to downstream parts

• High-level replacement: remove power and access the gearbox or motor housing; replace the worn planetary assembly with the matching unit
• Use proper tools and follow the appliance service manual for disassembly/reassembly to avoid damaging seals or fasteners
• If gears were damaged, inspect mating gears, bearings, and shafts for wear before reassembly
• Dispose of damaged gears properly;

This is the vertical column subassembly for a stand mixer, finished in empire red. It forms part of the main housing structure that supports the mixer head and internal drive components. Replace this part if the column is cracked, chipped, or cosmetically damaged and you want to restore the mixer's appearance and structural integrity.

This is a bowl support subassembly in empire red that secures the mixing bowl to the base of a stand mixer. It ensures the bowl stays firmly in place during mixing operations. Replace this part if your mixing bowl wobbles, won't lock into position, or comes loose while the mixer is running.

This is a metallic chrome bowl support assembly that holds the mixing bowl securely in place on a stand mixer. It includes the support bracket and locking pin that keep the bowl stable during operation. Replace this part if the bowl wobbles, does not lock into position, or if the support is cracked or bent.

This is a bowl support subassembly in onyx black that holds the mixing bowl securely in place on a stand mixer. It provides stable support so the bowl doesn't wobble or shift during mixing. Replace this part if your mixing bowl no longer locks into position, feels loose, or detaches during operation.

White decorative column cover for stand mixers. Replaces cracked, chipped, or discolored housing on the mixer body. Restores cosmetic appearance.

This is a bowl support assembly in imperial gray for a stand mixer. It secures the mixing bowl in place on the base of the mixer, ensuring stability during operation. Replace this part if the bowl wobbles excessively, the support is cracked or broken, or if the locking mechanism no longer holds the bowl firmly.

This is the base panel assembly with attached feet that forms the bottom structure of a stand mixer. It provides stability and support during mixing operations. Replace this assembly if the base is cracked, the feet are broken or missing, or the mixer wobbles and moves excessively during use.

This is a structural column sub-assembly in onyx black that forms part of the dishwasher's internal housing framework. It provides support and alignment for adjacent components within the dishwasher cavity. Replace this part if the column is cracked, warped, or broken, which can cause misalignment of racks, door components, or other internal parts.

This is the upper machine housing for a stand mixer. It forms the main structural shell that encloses the motor and internal drive components. Replace this housing if it is cracked, damaged, or if internal components are no longer held securely in place.

This is the upper motor housing shell for a stand mixer, finished in metallic chrome. It covers and protects the internal motor and gearing components while giving the mixer its exterior appearance. Replace this housing if it is cracked, chipped, or cosmetically damaged, or if the housing no longer fits securely onto the mixer body.

This is the upper motor housing for a stand mixer, finished in Empire Red porcelain enamel. It encloses and protects the motor and internal drive components of the mixer. Replace this housing if it is cracked, chipped, or damaged, which can expose internal parts to debris and compromise the appearance and structural integrity of the mixer.

A white replacement bowl support that centers and stabilizes the appliance bowl or glass tray to reduce wobble and noise, helping restore smooth rotation and reliable operation. What it does:

• Centers and supports the bowl or glass tray to prevent off-center rotation and rubbing.
• Keeps the tray steady to reduce vibration and noisy operation.
• Helps the tray rotate smoothly for even heating or proper function.
• Common symptoms it can address: wobbling or off-center bowl/tray, noisy rotation, scraping or unstable tray movement.

• Disconnect power to the appliance before starting any work.
• Remove the bowl or glass tray and lift out the old support; inspect the drive hub or shaft for damage.
• Align the support over the hub/shaft and press into place until fully seated; do not force broken or warped plastic.

If your stand mixer is excessively noisy or vibrating, the motor housing may be cracked or damaged. This white housing secures and protects the motor.

This is the outer motor housing shell for a stand mixer in an onyx black finish. It covers and protects the motor and internal components while giving the mixer its exterior appearance. Replace this housing if it is cracked, chipped, or cosmetically damaged.

Fix grinding noise or slipping during mixing with a new lower gearcase. Transfers motor power to the rotating assembly. Moderate DIY repair.

If your mixer won't agitate properly or makes grinding noises, this planetary gear assembly transfers motor motion to restore mixing action.

Fix a broken planetary shaft or restore smooth mixing action. This planetary assembly links the gearcase to the beater shaft for consistent rotation.

Fix grinding noise or leaking grease with a new lower gearcase housing. Restores proper alignment and contains lubrication for quieter mixing.

Fix a mixer planetary that fell off or slipped down. This assembly holds the beater and rotates it around the bowl for thorough mixing. DIY repair.

Color: Metallic Chrome

If your mixer attachment falls off or makes clunking noises, the planetary assembly likely needs replacement. This is a 15-minute repair with basic tools.

Holds and rotates mixer attachments around the bowl. Replace if cracked, worn, bent, or falls out during operation. Includes housing and shaft.

Lubricates planetary gears in stand mixers. Replace when grease darkens, mixer makes noise, or after gear replacement. Confirm fit with your model.