Parts for Electrolux E30EW75GPS4: 05 - Body Parts

Rear panel back for ovens and ranges. Replaces cracked, damaged, or missing exterior back panels. Essential structural part for cabinet integrity.

Replace your oven rack if it's warped, rusted, or has damaged supports. This rack slides into the oven cavity to hold cookware during baking and roasting.

Broiler pan rack for electric ovens and ranges. Replaces cracked, warped, or missing racks. Installs inside broiler pan for elevated cooking.

Broiler pan for electric and gas ranges. Installs in oven cavity for broiling. Replace if cracked, warped, rusted, or heavily stained beyond cleaning.

Broiler pan insert sits under the broiler burner to catch drips and grease. Replace if cracked, warped, or heavily stained for cleaner broiling.

Oven rack glide and support assembly that helps racks slide smoothly in and out. Replace if cracked, bent, broken, or missing to restore proper function.

Oven rack glide and support assembly that mounts inside the oven cavity. Replace this part if your existing rack support is broken, bent, or worn.

Fix an oven light that won't turn off or controls that don't respond. This control panel switch restores reliable on/off function. DIY-friendly repair.

Fix burner won't heat or control problems with this oven infinite switch. Controls surface element temperature. Moderate DIY repair, 30-45 minutes.

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

Oven displaying probe error or reading temperature when unplugged? This meat probe monitors internal food temperature. Easy DIY replacement part.

Fix oven power issues or control panel failures with this terminal block receptacle. Connects wiring to heating elements. Moderate DIY repair, 30-45 minutes.

Secures burner or oven control to the control panel behind the knob. Replace if stripped, missing, or loose to keep control shaft stable and aligned.

This decorative outer trim restores the finished appearance of the appliance and helps protect edges around the door or control panel. It replaces damaged, chipped, or missing trim to keep the appliance looking like new. What it does

• Provides a finished, clean edge around the appliance door or control area
• Hides gaps and covers mounting edges for a factory look
• Replaces cracked, dented, or worn trim that affects appearance
• Keeps adjacent components protected from dings and scrapes

• One decorative outer trim piece as shown

• Disconnect power (and gas supply, if applicable) before beginning work
• Remove any door or panel to access trim mounting screws or clips
• Handle with care to avoid scratching or chipping the new trim; use appropriate hand tools
• Keep all fasteners and alignment tabs; verify fit before tightening completely

Range won't power on or tripped breaker? Burnt or loose terminal block connections are often the cause. This kit restores safe power delivery. DIY-friendly.

Burner not heating or cooking unevenly? This radiant surface element restores heat to your glass cooktop zone. Direct fit for smooth-top ranges.

Oven not heating or baking unevenly? A failed bake element is often the cause. This replacement requires pulling the oven out to access the rear panel.

Replace your oven's protective heat shield if cracked, warped, or missing. Installs inside the oven cavity to protect internal components from heat damage.

Replace your oven's door bumper if cracked, worn, or missing. This cushioning component protects the door frame and ensures a proper seal when closed.

Spacer for ranges and ovens. Maintains proper spacing between components. Replace if worn, cracked, or missing to ensure correct alignment and fit.

Mounting plate that secures the oven to the cabinet or wall. Replace this metal support plate if it's bent, rusted, or missing to ensure proper installation.

Oven door won't close or latch properly? This door latch assembly secures the door and activates the safety switch. Moderate DIY repair in 30-45 minutes.

Mounting bracket for wall ovens. Secures the oven unit to the cabinet opening. Replace if bent, rusted, or missing to ensure proper installation.

Fix oven lights that won't turn off, error codes E75/E35/F15, or non-responsive controls. This control board restores normal range operation.

Mounting screw secures heating element to cooktop surface. Replace if stripped, rusted, or missing to ensure proper element installation and stability.

Replace a cracked, broken, or missing access panel cover on your range or oven. Secures internal components, restores finished appearance, and shields wiring.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

Securing nut for ovens and ranges. Holds interior components like convection fans in place. Replace if stripped, damaged, or missing during repair.

Fix noisy convection fan operation with this motor replacement. Restores quiet, even heating in your oven. Moderate DIY repair in 30-60 minutes.

Replace your oven's broken or missing rack spring. This small metal spring helps support and stabilize oven racks during sliding and positioning.

Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.

Positions and supports range components to maintain proper alignment. Replace if cracked, broken, or missing to prevent rubbing and ensure panels fit correctly.

This replacement mounting bracket secures internal components or panels to the appliance frame for proper alignment and stable operation. It restores a solid attachment point to reduce movement and prevent noise or part misalignment. What it does:

• Provides a secure mount for internal assemblies or trim panels.
• Keeps components aligned to prevent rubbing, rattling or vibration.
• Restores proper fit where a bent, broken or missing bracket caused loose parts.
• Helps maintain safe operation by keeping wiring and piping routed away from moving parts.

• One mounting bracket.

• Disconnect power to the appliance before beginning any repair.
• Basic hand tools commonly required; handle edges carefully to avoid cuts.
• Inspect surrounding fasteners and replaced parts; reuse original screws only if in good condition.

Mounting screw for microwave installations. Secures cabinet or wall mounting brackets. Replace if missing, stripped, or damaged during reinstallation.

Installation tool for mounting built-in microwave ovens. Required for proper alignment during install. Replace if missing, damaged, or worn from use.

This installation tool assists with mounting and securing your microwave during setup. Replace if lost, damaged, or missing from your original kit.

Replacement mounting screw for ovens and ranges. Secures panels, brackets, and components. Order a new screw if yours is stripped, missing, or damaged.

Wiring harness assembly that routes power and signals between your wall oven's control and components. Replace when harness is damaged or corroded.

Wiring harness for wall ovens. Connects electrical components inside the oven cavity. Replace if wires are frayed, burned, or connections are loose.

Mounting screw for securing range components and panels. Replace if screw is stripped, missing, or no longer holding parts securely in place.

Hex flange nut with 10-32 thread secures components in appliances. Replace if stripped, missing, or damaged. Flange provides broader bearing surface.

Mounting screw for electric range and wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged during repair.

Mounting screw for electric range, oven, or wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged.

Adhesive seal tape restores tight door seals on ovens, reducing air leaks and improving temperature control. Replace when worn or damaged. Confirm fit.

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

Replacement mounting screw secures refrigerator panels, brackets, and trim to the chassis. Needed when original fasteners are stripped, missing, or damaged.

Replacement mounting screw secures refrigerator panels, brackets, and trim to the chassis. Needed when original fasteners are stripped, missing, or damaged.

Secures the control panel assembly on your range. Replace if the mounting lock is cracked, broken, or missing to restore proper panel stability.

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.