Parts for Ge GLD4908V00BB: 02 - Body Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Size: 10-32 GXTT FLP.595 S

Secures panels, brackets, and hardware in your appliance. Replace when stripped, rusted, or missing to prevent looseness and vibration. Verify fit.

This door latch assembly secures the dishwasher door and contains two interlock switches that signal the control when the door is fully closed. Replacing a worn latch restores consistent door engagement so cycles can start and run correctly.

• Locks the door closed and keeps it from opening during operation
• Houses two micro switches that confirm door-closed status to the control
• Common symptoms: dishwasher won't start, needs pressure on the door to run, stops when jostled, or won't latch securely
• Restores reliable door closure and proper safety interlock function

What's included: 1 door latch assembly with dual micro switches. Installation notes:

• Disconnect power at the breaker before servicing
• Remove inner door panel screws to access the latch area
• Note wire positions on both switches; move connectors to the same terminals on the new assembly
• After installation, verify latch engagement with the door strike and test a short cycle

Thread-forming screw secures dishwasher panels, brackets, and trim components. Replace missing or stripped fasteners to restore proper mounting.

This adjustable leg allows you to level your dishwasher and adjust its height for proper installation under countertops. It supports the dishwasher's weight while providing stability during operation. Replace this part if your dishwasher rocks during cycles, isn't level, or if the existing leg is stripped or broken.

Dishwasher overflowing or leaking from the door? A faulty float can cause overfill issues. This float controls water level and prevents flooding.

Dishwasher overflowing or leaking? The float stem connects your tub float to the switch that stops water flow. Quick 15-minute DIY fix for most models.

Dishwasher leaking or won't start? This flood switch detects unwanted water and alerts the control. Direct-fit part for common leak detection issues.

Connects dishwasher wiring to the water inlet valve. Replace if the plug is burnt, brittle, loose, or corroded to restore a secure electrical connection.

Replacement inlet cover trim that protects the water inlet area in your dishwasher. Snaps into place to restore a clean finished look if cracked or missing.

Dishes coming out dirty or spotty? A clogged sump filter lets food particles recirculate. This filter traps debris for cleaner dishes. DIY install.

The Upper Spray Arm Bearing is an OEM part for GE dishwashers. It supports the upper spray arm, allowing it to rotate smoothly and distribute water evenly throughout the dishwasher. This ensures that all dishes receive a thorough cleaning during each cycle.

Over time, the upper spray arm bearing can wear out or become damaged. Causes of a bad bearing can include repeated use, mineral buildup from hard water, or physical damage due to mishandling.

Symptoms of a bad Upper Spray Arm Bearing include:

• The upper spray arm not rotating properly
• Ineffective cleaning of dishes on the upper rack
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Scr 8-16 b hxw 1.08 ss

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

 The Upper Arm Spray Assembly is an OEM part for GE dishwashers. It is responsible for distributing water evenly throughout the dishwasher during the cleaning cycle, ensuring all dishes are thoroughly cleaned. The arm measures approximately 11 inches long.

You should replace the upper arm spray assembly if it becomes clogged, damaged, or worn out. Causes of a bad spray assembly can include mineral buildup from hard water, food particles blocking the spray holes, or physical damage such as cracks or breaks.

Symptoms of a bad upper arm spray assembly include:

• Poor cleaning performance, with dishes coming out dirty
• Uneven water distribution inside the dishwasher
• Visible cracks or blockages in the spray arm
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

 The Upper Arm Spray Assembly is an OEM part for GE dishwashers. It is responsible for distributing water evenly throughout the dishwasher during the cleaning cycle, ensuring all dishes are thoroughly cleaned. The arm measures approximately 11 inches long.

You should replace the upper arm spray assembly if it becomes clogged, damaged, or worn out. Causes of a bad spray assembly can include mineral buildup from hard water, food particles blocking the spray holes, or physical damage such as cracks or breaks.

Symptoms of a bad upper arm spray assembly include:

• Poor cleaning performance, with dishes coming out dirty
• Uneven water distribution inside the dishwasher
• Visible cracks or blockages in the spray arm
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Rinse aid dispenser funnel for dishwashers. Guides rinse aid into the dispenser reservoir. Replace if cracked, broken, or missing to prevent leaks.

Seals the water inlet funnel to prevent drips and direct water into the tub. Replace if you notice leaks at the inlet or water escaping during fill.

Covers the electrical junction box where the power cord enters your dishwasher. Replace if cracked, broken, or missing to protect wiring connections.

Dishwasher not filling with water or fills slowly? The water inlet valve controls water flow into your dishwasher. Simple DIY repair, 30-60 minutes.

Replacement mounting screw for dishwashers and electric ranges. Secures panels, covers, and internal components. Order when original is missing or stripped.

Size: 10-16 ab.

Secures dishwasher panels, brackets, and components with 10-32 machine threads. Replace when screws are stripped, missing, or lost during repairs.

Insulation blanket that wraps around the dishwasher tub to reduce noise and maintain temperature. Replace if damaged, torn, missing, or contaminated.

Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.

Dishwasher tub gasket creates a watertight seal between the tub and door. Replace if you notice water leaking or steam escaping. Confirm fit by model.

Prevents leaks by sealing the bottom of your dishwasher door. Replace if water leaks during cycles or rubber shows wear. Verify fit with your model number.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.