Bosch Dishwasher Panel Parts

The Panel-Facia is an OEM component specifically designed for select Bosch dishwashers. Front-facing, it provides control buttons and a digital display for intuitive operation. The sleek design complements the surrounding cabinetry. 

Causes of a faulty panel facia commonly involve wear over time inhibiting responsive touch points. Exposure to moisture poses risks of display deterioration or non-functionality.

Symptoms of a bad panel facia include:

• Control buttons sticking, sticking, or failing to input selections  
• Unlit or unreadable display preventing cycle monitoring
• Loose or misaligned fitment impacting the door seal

Causes of a bad panel facia can involve normal degradation inhibiting smooth movements. Repeated moisture contact increases risks of internal corrosion necessitating change. 

This OEM Bosch part is also compatible with some Thermador, Blomberg, and Miele dishwashers. Replace to maintain a dependable interface for easy cycle programming and monitoring.
 

The Panel Facia is an OEM part for Bosch dishwashers. It is the front control panel of your dishwasher, providing a clean and polished look.

A bad panel facia can occur due to wear and tear over time, accidental damage, or exposure to moisture and cleaning agents. Signs of a faulty facia include cracks, discoloration, or a loose fit that compromises the aesthetic appeal of your dishwasher.

Symptoms of a bad panel facia include:

• Cracks or visible damage on the surface
• Discoloration or fading
• A loose or missing panel

Replace your damaged or worn-out panel facia with this genuine OEM Bosch part to restore the appearance of your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Control Module Front Cover is an OEM part for Bosch dishwashers. This front cover protects the internal control board governing all dishwasher functions.

Causes of a bad control module front cover can include cracked or broken plastic from overtightening, damage due to impact or handling, or warping over time.

Symptoms of a bad control module front cover include:

• Lights and controls malfunctioning or not responding
• Water or debris entering the control area
• Loose or missing front cover exposing internal parts
• Damage allowing for short circuits or shock hazards

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This outer door is the dishwasher's exterior front panel that restores the appliance's appearance and protects internal components from damage. It provides a finished look and replaces dented, scratched, or corroded panels. What it does

• Covers and protects the inner door assembly, controls, and insulation from impact and moisture.
• Restores the dishwasher's exterior finish and alignment for proper sealing.
• Helps prevent further cosmetic damage and exposure-related corrosion.
• Resolves issues where visible dents, deep scratches, or rust affect the door surface.

• One outer door panel only.

• Disconnect power and water supply before starting any repair.
• Door panels can be heavy or awkward—have a second person assist to avoid dropping or bending the panel.
• Follow the manufacturer's service manual for correct removal/reinstallation steps and torque specifications.
• If trim, latch, or control components are attached, verify whether they must be transferred from the old door.

The Base Panel is an OEM part for Bosch dishwashers. This part is located at the bottom front of the dishwasher, serving both functional and aesthetic purposes. It helps protect internal components from dust, debris, and moisture, while also providing a finished look to the appliance.

Causes of a bad base panel can include physical damage from impacts, corrosion due to exposure to moisture, and wear and tear over time.  

Symptoms of a bad base panel include:

• Visible cracks, dents, or holes in the panel
• The panel becoming loose or falling off
• Increased noise during dishwasher operation
• Internal components being exposed to dust and moisture

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Facia Panel is an OEM part for Bosch dishwashers. This panel is the interface hub for the dishwasher, featuring controls and indicators for the various functions of the appliance. It's essential for ensuring that users can select the appropriate settings for their dishwashing needs.

Causes of a bad Facia Panel can include exposure to moisture leading to electrical malfunctions, physical damage from impacts or heavy usage, and wear over time that affects the visibility or responsiveness of controls.

Symptoms of a bad Facia Panel include:

• Unresponsive or intermittently working buttons
• Faded or unclear display indicators
• Cracks or damage that may prevent proper function or aesthetics

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Panel-Facia is an OEM component specifically designed for select Bosch dishwashers requiring sturdy mounting points for control interfaces. As an assembly attachment, it secures digital displays and mechanical inputs.

Reinforced composite edges withstand years of repeated loading and latching without fatigue or warping. Independent fasteners avoid stress concentrations that could crack surrounding plastics.

Symptoms signaling the need for a new panel-facia include:

• Gaps permitting water intrusion compromising connected circuitry
• Loosened control mountings enabling unintended contact separation 
• Fatigued fastening points releasing entire control assemblies

Causes requiring replacement relate to repeated expansion and contraction cycles stressing adhesives and joints. Direct impacts may also deform secure positioning preventing proper interfacing. 

This OEM Bosch replacement panel is also compatible with Thermador, Gaggenau, and some Kenmore models relying on robustly attached interface housings. Correct installation restores sealing and component positioning.
 

The Panel-Facia is an OEM part for Bosch dishwashers. It is the front facing decorative facade that gives the integrated appearance.

Causes of a bad panel-facia can include cracks, chips or other physical damage affecting the high-gloss finish from everyday use over time. Exposure to heat or chemicals during cleaning could accelerate deterioration as well.

Symptoms of a bad dishwasher panel-facia include:

• Dull or uneven appearance on the stainless steel surface
• Visible damage like cracks or fractures
• Potential leaks if the integrity is compromised
• Facade not securely mounting onto the dishwasher frame

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is the front control panel fascia for the appliance's user interface. It replaces a damaged or worn fascia so buttons and labels are protected and the unit looks and operates as intended.

• Houses and protects the control buttons/overlay area
• Restores proper alignment and visibility of controls
• Cosmetic renewal for scratched, dented, or cracked panels
• Common symptoms: loose or missing panel, cracked face, worn or unreadable markings

• Disconnect power before servicing
• Transfer any attached switches, display/overlay, and hardware from the old panel
• Handle stainless surfaces carefully to avoid scratches
• Verify correct seating of tabs and screws before reassembly

The Panel Facia is an OEM part for Bosch dishwashers. It is the front control panel of your dishwasher, providing a clean and polished look.

A bad panel facia can occur due to wear and tear over time, accidental damage, or exposure to moisture and cleaning agents. Signs of a faulty facia include cracks, discoloration, or a loose fit that compromises the aesthetic appeal of your dishwasher.

Symptoms of a bad panel facia include:

• Cracks or visible damage on the surface
• Discoloration or fading
• A loose or missing panel

Replace your damaged or worn-out panel facia with this genuine OEM Bosch part to restore the appearance of your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This inner door is the interior panel for a dishwasher door that protects internal components and provides a finished inside surface. Replacing a damaged inner door restores proper sealing and appearance. What it does:

• Forms the interior surface of the dishwasher door and helps contain water during cycles
• Protects wiring, insulation, and electronics housed inside the door
• Helps maintain a proper seal to prevent leaks and improve wash performance
• Addresses symptoms like visible door damage, interior rust, dents, or moisture inside the door cavity

• Disconnect power and water supply before starting any repair
• Removing the outer door panel or control panel may be required;
• Keep fasteners and trim organized for reassembly; some clips or screws may be needed

This outer door panel is the exterior panel that restores the appliance's front appearance and protects internal door components. Replacing a damaged or dented outer panel brings back a flush, sealed door and improves the unit's look. What it does

• Covers and protects inner door components from impact, moisture, and wear
• Restores proper door alignment and helps maintain the cabinet seal
• Improves cosmetic appearance when the original panel is dented, scratched, or corroded
• Helps prevent debris from entering the door cavity and affecting internal parts

• One outer door panel

• Designed for compatibility with specific OEM door assemblies; fit for your model before ordering
• Handle and trim may need transfer from the old panel; your model's parts diagram
• Use appropriate fasteners and avoid overtightening to prevent panel distortion
• Disconnect power and water (if applicable) and follow general safety precautions before servicing