Dishwasher Panel Parts

The Dishwasher Control Panel is an OEM replacement part for GE dishwashers. This panel houses the selection buttons and display for programming and monitoring the dishwasher’s wash cycles.

Causes of a bad control panel can include electrical issues, exposure to moisture, or physical damage from regular use. Over time, the buttons may wear out or become unresponsive, and internal components can fail due to power surges or corrosion.

Symptoms of a bad control panel include:

• Unresponsive buttons or touch controls
• The display not illuminating or showing incorrect information
• The dishwasher not starting or stopping mid-cycle
• Error messages on the display

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dishwasher Access Panel is an OEM part for Whirlpool dishwashers. This panel covers the lower front section of the dishwasher, providing a finished look while protecting internal components from debris and damage.

Causes of a bad access panel include accidental impacts, wear and tear over time, or exposure to moisture, which can lead to rust or corrosion.

Symptoms of a bad access panel include:

• Visible cracks or dents
• Rust or discoloration
• Loose or misaligned panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Panel-Facia is an OEM replacement part for  Bosch dishwasher models. Located at the front of the control panel, it protects electronic interfaces for setting wash cycles and options.

Causes of a bad panel can include cracks or chips developing from repeated button/door contact, or weakened plastic compromised by common cleaning chemicals over time.

Symptoms of a bad panel include:

• Exposure of internal electronic boards from broken fascia pieces
• Warping allows debris/moisture to enter touch areas
• Discoloration or fading inconsistent with the rest of the exterior

This genuine Bosch replacement is compatible also with Gaggenau appliances.

This replacement panel restores your appliance's original look while shielding internal components. Install a new panel to replace a dented, cracked, or missing piece and keep the assembly secure, aligned, and protected.

• Covers and protects internal parts while restoring the exterior finish and fit
• Provides the designed mounting surface for trim/handles; helps maintain alignment
• Replace when the panel is dented, cracked, warped, rusted, or mounting tabs are broken
• Helps resolve loose or rattling panels and visible gaps or misalignment

• Disconnect power; turn off water or gas supply if applicable
• Wear gloves and protect finished surfaces; handle carefully to avoid bending or scratching
• Transfer and reuse original screws, clips, insulation, and trim as directed by your service manual
• Fit and alignment before fully tightening fasteners

The Toeplate is an OEM part for Frigidaire dishwashers, specifically designed to fit seamlessly at the bottom of your appliance. This toeplate not only enhances the aesthetic appeal of your dishwasher by hiding the space beneath the appliance but also serves as a protective barrier, preventing debris from getting under the dishwasher.

Causes of a bad toeplate include physical damage such as dents, cracks, or warping, often resulting from accidental kicks or impacts. Additionally, improper installation can lead to a loose or misaligned toeplate, which may compromise its functionality and appearance.

Symptoms of a bad toeplate include:

• Visible damage or deformation.
• Difficulty in fitting or securing the toeplate to the dishwasher.
• Increased noise or vibration due to lack of insulation or support.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Control Panel is an OEM replacement part for Whirlpool built-in dishwashers. It is the control panel located on the front façade, comprising buttons to select cycles and indicator lights showing progress. This interface allows for efficient operation through simple input of wash selections. 

Causes of a failing control panel involve damage to electronic components from moisture exposure over time. Wiring degradation or faulty circuit boards can also disrupt intended functions.

Symptoms of an inadequate control panel include:

• Unresponsive buttons that do not initiate cycles  
• Light indicators that do not illuminate properly
• Erratic or unexpected dishwasher behavior

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Level Switch Bracket is an OEM part for Whirlpool dishwashers. This bracket holds the water level switch in place. The water level switch is a part that monitors and regulates the amount of water inside the dishwasher.

Causes of a bad Water Level Switch Bracket can include physical damage that may occur during use or installation, corrosion over time due to exposure to moisture and detergents, or general wear that compromises its ability to securely hold the water level switch.

Symptoms of a bad Water Level Switch Bracket include:

• The dishwasher not filling with the correct amount of water
• Water leaking from the dishwasher if the switch moves out of position and fails to regulate the water level accurately.
• Unusual noises during the fill cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Base Panel is an OEM part for Bosch dishwashers. It serves as a protective cover for the bottom of the dishwasher, shielding internal components from debris, moisture, and damage while also contributing to the appliance's structural stability.

Causes of a bad base panel can include physical damage from impacts, corrosion due to prolonged exposure to moisture, or general wear and tear over time. A compromised base panel can lead to further issues by allowing dirt and water to infiltrate sensitive components.

Symptoms of a bad Base Panel include:

• Visible cracks or holes in the panel
• Water leaking from the bottom of the dishwasher
• Increased noise during operation
• Loose or misaligned panel

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This Control Panel is an OEM part for Bosch dishwashers. It is responsible for providing a user interface and housing various controls and buttons to operate the dishwasher efficiently. The control panel allows users to select different wash cycles, adjust settings, and initiate specific functions according to their cleaning requirements.

Causes of a bad control panel can include physical damage, electrical issues, or normal wear and tear over time. When the control panel malfunctions, it can result in unresponsive buttons, erratic display, or difficulties in operating the dishwasher.

Symptoms of a bad control panel may include:

• Non-functional or unresponsive buttons
• Dim or flickering display
• Inability to select or adjust settings
• Error codes or incorrect cycle indications

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Facia Panel is an OEM part for Bosch dishwashers. This part is the front-facing control interface of the dishwasher, housing the buttons and display used to operate the appliance.

Causes of a bad facia panel can include physical damage such as cracks or breaks, wear and tear from frequent use, or malfunctioning electronic components behind the panel.

Symptoms of a bad facia panel include:

• Buttons not responding when pressed
• Display malfunctioning or not lighting up
• Visible cracks or damage to the panel
• Difficulty in selecting or changing cycles

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Console Cover and Graphics Assembly is an OEM replacement part for  GE dishwashers. As the protective interface for controls, it directs user inputs.

Causes of failure involve cracks or chips developing from extended exposure. Discoloration over time or loosened retaining clips may also diminish aesthetics.

Symptoms of a problematic console cover include:

• Responses from touch controls
• Water intrusion detecting behind panel
• Loose, damaged or missing retaining clips

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Panel (BLK) is an OEM part for Whirlpool dishwashers. This black exterior panel is designed to provide a sleek and durable front surface for the dishwasher, enhancing its appearance and protecting internal components.

Causes of a bad panel can include physical impacts, scratches, or general wear over time. A compromised panel can affect the aesthetic appeal and may expose internal components to potential damage.

Symptoms of a bad panel include:

• Visible dents, scratches, or cracks
• The panel not fitting securely or aligning properly
• Discoloration or fading of the panel surface
• Difficulty opening or closing the dishwasher door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Panel is an OEM replacement part for Bosch dishwashers, as the front façade of the dishwasher. Color: Black

Causes of a bad facia panel can be normal wear and tear from use, accidental impacts that damage the surface, or issues originating internally like a bowed door frame putting undue pressure on the panel.

Symptoms of a bad control panel include:

• Cracks, dents, scratches or other exterior damage that compromises its structural integrity.
• Removable components like handles may also become loose or detached.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Control Panel Assembly is an OEM replacement part for GE dishwashers. It houses the buttons and controls that users interact with to select and initiate different wash cycles and options. This assembly is integral for the user interface, ensuring that selections are communicated to the dishwasher's internal systems for execution.

Symptoms of a bad Control Panel Assembly include:

• Unresponsive buttons or controls
• The dishwasher not starting or pausing mid-cycle
• Error codes or lights indicating control or communication issues
• Inconsistent or incorrect execution of selected wash cycles

Causes for a malfunctioning Control Panel Assembly can include electrical issues, wear and tear from regular use, or damage due to cleaning or spills.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwashers.

The Facia Panel is an OEM part for Bosch dishwashers. This panel serves as the user interface, housing the control buttons and display screen that allow you to select and monitor dishwasher cycles.  

Causes of a bad facia panel can include regular wear and tear, physical damage from impacts, or exposure to moisture which can affect the electronics.

Symptoms of a bad facia panel include:

• Unresponsive or stuck control buttons
• Display screen not working properly or showing errors
• Cracks, discoloration, or other visible damage
• Difficulty in selecting or changing dishwasher settings

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Control Panel is an OEM part for GE dishwashers. It serves as the main interface for operating the dishwasher, housing the selection buttons and display screen. This panel allows users to choose wash cycles, set various options, and monitor the progress and status of the dishwasher.

Causes of a bad control panel can include electrical issues such as short circuits, exposure to moisture which can cause corrosion or damage, and physical wear and tear from regular use.  

Symptoms of a bad Control Panel include:

• Unresponsive or sticky buttons
• Display not lighting up or showing incorrect information
• Inability to select or change wash cycles
• Dishwasher starting and stopping unexpectedly or not starting at all

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.