Parts for Electrolux EI23BC56IS9: 07 - Cabinet Parts

Fan cover for bottom-mount refrigerators. Protects the fan assembly from debris. Replace if cracked, broken, or missing to maintain proper airflow.

Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.

Replaces worn or damaged shaft support bushing in your refrigerator. Cushions rotating shafts to reduce friction and noise. Order a new bushing today.

Seals the coil cover area to maintain proper airflow and prevent dust buildup. Replace if worn, cracked, or losing seal efficiency. Verify fit with your model.

This evap coil cover protects the evaporator and helps direct airflow for more consistent cooling. It replaces damaged or missing covers to reduce frost buildup, keep debris away from the coil, and help prevent interior leaks. What it does:

• Shie

Seals unused holes in refrigerator cabinet or liner. Prevents drafts, moisture, and pests from entering through open fittings. Restores clean appearance.

Foam insulation for refrigerator air supply ducts. Replaces worn, compressed, or missing foam that reduces cooling efficiency and airflow in your fridge.

Fix SY EF error codes or warm refrigerator temperatures with this evaporator fan motor. Moderate DIY repair restores air circulation and cooling.

Interior light won't turn on or off? This refrigerator light switch controls the lamp circuit. Easy DIY fix restores reliable lighting control.

LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.

Wiring harness for refrigerators. Connects electrical components inside the appliance. Replace if wires are frayed, damaged, or connections are loose.

This cover-damper is the plastic airflow housing that protects and directs cold-air damper components so the refrigerator can regulate fresh-food compartment temperature more reliably. What it does

• Houses and protects the damper assembly that controls airflow from the freezer to the fresh-food section
• Directs and seals airflow to help maintain even temperatures in the refrigerator compartment
• Failsafe symptom language: replace if the damper cover is cracked, broken, or missing, or if you notice uneven temperatures, warm spots, or reduced cold air delivery
• Helps prevent air leaks that can cause frost buildup or cause the refrigerator to run longer than normal

• One cover-damper housing

• Disconnect power to the appliance before beginning any repair
• Remove shelves/panels as needed to access the damper; handle plastic tabs gently to avoid breakage
• Align the cover with the damper assembly and snap or fasten into place without forcing
• If the damper or related parts are damaged, inspect and replace those components as needed for proper operation

Wiring harness for bottom-mount refrigerators. Connects electrical components inside the unit. Replace if wires are frayed, damaged, or corroded.

Fix a refrigerator light that won't turn on, flickers, or has a loose bulb. This interior light socket secures the lamp and restores reliable lighting.

Fix intermittent refrigerator operation caused by worn or heat-damaged component sockets. This receptacle restores secure plug-in connections for reliable performance.

Seals the air duct connection to prevent air leaks and maintain consistent temperatures. Replace when worn, cracked, or causing temperature issues.

This air duct directs internal airflow to help maintain proper circulation and temperature control inside the appliance. It replaces a damaged or cracked duct to restore consistent airflow and reduce uneven cooling or heating. What it does:

• Channels air through the appliance to support normal temperature regulation
• Helps prevent localized hot or cold spots by keeping airflow consistent
• Reduces moisture buildup and frost formation by maintaining proper circulation
• Restores fit and alignment where a cracked or broken duct was letting air escape

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Require removal of exterior panels and use of basic hand tools (screwdriver, nut driver)
• Inspect mounting clips or screws and replace if damaged; tighten fasteners to secure the duct

Replacement screw fastener for securing panels, trim, and components inside your refrigerator. Needed when original screws are stripped or missing.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabi

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

This turntable roller assembly sits under the glass tray to support and guide it as it rotates. Replacing a worn or damaged ring helps restore smooth tray movement for more even heating and dependable microwave performance.

• Supports the glass tr

Secures internal components to the refrigerator frame. Replace this mounting bracket if the original is bent, broken, or missing to restore alignment.

Washer for bottom-mount refrigerators. Replaces lost, damaged, or worn washers used to secure components. Essential for proper assembly and fit.

Lower door hinge for bottom-mount refrigerators. Secures the door to the cabinet frame. Replace if cracked, stripped, or causing door misalignment.

Lower door hinge provides the pivot point for your refrigerator door. Replaces worn, damaged, or broken hinges that cause door sagging or misalignment.

Plastic spacer that mounts between refrigerator door components to maintain proper alignment and spacing. Replace if cracked, broken, or missing.

Door spacer for bottom-mount refrigerators. Maintains proper spacing between door panels and cabinet. Replace if cracked, missing, or worn to prevent rubbing.

OEM mounting bracket that secures the hinge and pin assembly inside your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.

Trim cap that covers the upper door hinge assembly. Restores finished appearance and protects hinge area. Replace if cracked, broken, or missing.

Covers and protects the upper door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look.

Left-hand gray upper hinge cover snaps over the top door hinge to conceal hardware and restore a finished look. Replace when cracked, broken, or missing.

Specs: Hex head ,1/4-20 x 5/8

This turntable roller assembly sits under the glass tray to support and guide it as it rotates. Replacing a worn or damaged ring helps restore smooth tray movement for more even heating and dependable microwave performance.

• Supports the glass tr

Replacement screw for refrigerator panels, brackets, and covers. Secures interior and exterior components. Needed when original is missing, stripped, or corroded.

Refrigerator door guide channel that helps align and support the door mechanism. Replace if cracked, broken, or worn to restore proper door alignment.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.

Replaces the decorative toe grille panel that covers the base of your refrigerator. Needed when the original is cracked, broken, or discolored.

Small bearing insert that supports the refrigerator door stop mechanism. Replace when worn, cracked, or causing loose door alignment and excess play.

Hex washer head ,10-32 x 0.375. Ground

This cover assembly replaces a damaged or missing cover on your appliance, protecting internal components and restoring a clean, finished appearance. Use it when the original is cracked, loose, or no longer secures properly.

• Shields internal par

Fixes incorrect temperature readings and short cycling. This thermistor monitors fridge temps and signals the control board. Moderate DIY repair.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.

Molded plastic evaporator cover that protects the freezer coil assembly and directs airflow. Replace if cracked, broken, or missing for proper cooling.

Clear light shield lens protects interior refrigerator bulb from moisture and impact while diffusing light. Replace if cracked or tabs broken. Confirm fit.

Replacement light lens cover for your refrigerator. Replace when cracked, yellowed, or damaged to restore proper lighting. Verify fit with your model number.

Plastic cover that protects and conceals electrical wiring connections in your refrigerator. Replace if cracked, broken, or missing to restore appearance.

Fix a fridge that's freezing food or not cooling properly. This air damper controls cold airflow between compartments. Moderate DIY repair for most models.

Seals the air damper opening to maintain proper airflow between compartments. Replace if torn or compressed to fix uneven cooling and drafts.

Seals refrigerator door to maintain temperature and reduce energy loss. Replace if worn, torn, or compressed to restore cooling efficiency. Verify fit.

Seals refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing temperature issues. Verify fit with model number.

Secures the evaporator fan motor to its bracket for proper airflow. Replace if broken or missing to eliminate vibration, noise, or cooling issues.

Directs cold air from the evaporator through your freezer compartment. Snaps into the back wall. Replace if cracked, warped, or missing to restore airflow.

Wiring harness that connects the control board to internal components in your refrigerator. Replace if harness is damaged, frayed, or corroded.

Foam sleeve insulation that wraps around the refrigerator air duct. Replace worn, torn, or missing insulation to reduce condensation and moisture buildup.

Protective cover for EPS foam insulation in your refrigerator. Replace if cracked, broken, or missing to maintain proper insulation and appearance.

This thermistor kit is the refrigerator temperature sensor assembly that monitors internal air temperature so the control can run the compressor and fans at the right times. Replaces a failed sensor to restore proper temperature sensing and cycling. What

Color: White

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.