Parts for Lg 72062: Case Parts

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Replacement mounting screw for refrigerators. Secures internal components and panels. Order when original hardware is stripped, lost, or damaged.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Drain tray assembly for bottom-mount refrigerators. Collects defrost water beneath the unit. Replace if cracked, broken, or leaking onto the floor.

Fix temperature fluctuations or inaccurate readings with this refrigerator sensor control board. Manages temperature sensors for proper cooling control.

Center hinge assembly mounts between refrigerator and freezer doors on bottom-mount units. Replace if cracked, bent, or doors sag and don't align properly.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.

This is a rear end cap that attaches to the refrigerator door handle, providing a finished appearance at the handle's end. It snaps or fastens onto the handle assembly to secure it in place. Replace this cap if it is cracked, broken, or missing, which can cause the handle to feel loose or look incomplete.

This is a rear end cap designed to attach to the refrigerator door handle, giving it a finished look and helping hold the handle securely in place. It snaps onto the end of the handle assembly. Replace this part if it is cracked, broken, or missing, which can make the handle feel wobbly or unstable during use.

Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

Replace your refrigerator's light cover lens to restore proper illumination and protect the bulb. Fits if your dome light lens is cracked or yellowed.

This PTC cover is the protective housing that shields a PTC sensor/assembly from debris and physical damage, helping maintain reliable sensor performance and prolong component life in the appliance. What it does:

• Protects the PTC sensor or PTC assembly from dust, impact, and accidental contact
• Helps prevent shorting or intermittent sensor signals caused by contaminants
• Supports proper positioning and mounting of the PTC component
• Can help address symptoms such as visible sensor damage, exposed wiring, or intermittent operation related to a compromised sensor housing

• Disconnect power to the appliance before starting any repair
• Remove the outer panel(s) as needed to access the PTC location; handle surrounding wiring and components carefully
• Replace only with the correct OEM cover to ensure proper fit and protection

Dim or uneven refrigerator lighting? This LED light cover protects the bulb assembly and diffuses light evenly. Direct-fit lens restores visibility.

Water pooling under your refrigerator? This drain tray assembly collects condensate and directs it properly to prevent leaks and water damage.

Reduces odors and keeps compartments fresh by filtering circulating air. Replace when odors persist or every 6 months. Verify fit with your model number.

Refrigerator not cooling or leaking water? This valve assembly pipe routes water between valve components. Fixes leaks and restores water delivery.

Secures and protects the air filter in your refrigerator. Replace when cracked, broken, or missing to maintain proper airflow. Confirm fit with your model.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

Fix uneven cooling or frozen food in fresh food section with this refrigerator air damper. Controls airflow between compartments to balance temperatures.

Replace worn drawer slide rails to restore smooth, quiet operation in your refrigerator. Guides and supports sliding drawers securely. Verify fit by model number.

Fixes uneven cooling and scraping noises by directing airflow from the fan. This guide restores proper air circulation throughout your refrigerator.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Secures components in your refrigerator assembly, reducing vibration and keeping parts properly seated. Replace when damaged or missing to restore snug fit. Verify model compatibility before ordering.

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Fridge not cooling or freezing over? This evaporator coil assembly restores proper cooling when frost buildup or warm temperatures indicate coil failure.

Refrigerator not cooling evenly or warm spots in fresh food section? A cracked air duct disrupts cold air flow. This assembly restores proper circulation.

Fix refrigerator not cooling or freezing issues with this evaporator assembly. Essential component for proper temperature control in bottom-mount models.

Refrigerator won't power on or loses power intermittently? This power cord assembly replaces frayed or damaged cords to restore safe, reliable operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Refrigerator won't start or respond to controls? This main power control board manages power distribution and component coordination. Straightforward install.

This fan grille assembly covers and protects the refrigerator's fan while channeling airflow through the vents. Replacing a cracked or missing grille helps restore proper air circulation and can reduce noise and temperature fluctuations.

• Shields the fan blades and prevents items from contacting the intake
• Directs airflow to support even cooling throughout the compartment
• Typical symptoms: broken louvers or tabs, rattling/vibration noises, obstructed airflow, frost or warm spots near the fan area
• Restores the original airflow path and appearance after damage

• Disconnect power and clear shelves/drawers to access the panel
• Remove the screws/clips securing the old grille and retain any reusable hardware
• Position the new grille and fasten securely; ensure the fan spins freely and vents are unobstructed
• Restore power and allow temperatures to stabilize

Fix frost buildup and poor cooling with a new defrost heater. Melts ice from evaporator coils during automatic defrost cycles to maintain stable temps.

Right side upper hinge.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Refrigerator won't cool or compressor won't start? This run capacitor provides the electrical boost needed for smooth compressor operation. DIY repair.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Refrigerator not cooling or running warm? A faulty condenser fan motor assembly prevents proper airflow across the condenser. Includes motor and blade.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

This is a rubber or elastomer damper that supports and isolates the evaporator fan motor inside the refrigerator. It absorbs vibration from the motor to reduce noise during normal operation. Replace this part if you hear excessive buzzing, rattling, or vibration coming from the freezer section, which often indicates the damper has hardened or deteriorated.

The Ice Room Fan Motor is an OEM part for LG refrigerators. It circulates cold air within the ice compartment to maintain the optimal temperature for ice production and storage. By ensuring even air distribution, the fan motor helps keep the ice at the right consistency and prevents it from melting or clumping together.

The ice room fan motor can fail due to various reasons, including wear and tear from continuous use, electrical issues, or obstruction from ice buildup. Over time, the motor bearings can wear out, or the fan blades can become damaged.

Symptoms of a bad ice room fan motor include:

• The ice maker not producing ice or producing less ice than usual
• Ice melting or clumping together
• Unusual noises coming from the ice compartment
• Temperature fluctuations in the ice room

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

If your refrigerator shows an ER RF error code or won't cool properly, this fan motor assembly restores airflow. Moderate DIY difficulty repair.

The Thermistor Assembly is an OEM part for LG refrigerators. It serves a crucial function in monitoring and regulating the temperature within the appliance. By sensing temperature changes, the thermistor sends information to the refrigerator’s control board, ensuring the system adjusts cooling to maintain the desired temperature settings. 

Symptoms of a failing thermistor assembly include:

• Inconsistent temperatures in the refrigerator or freezer
• Refrigerator running longer than usual or not cooling efficiently
• Frequent fluctuations in temperature readings

Causes of thermistor assembly failure typically involve electrical faults, damage from moisture or frost, or simple wear over time, which can impact its ability to accurately measure and report temperatures.

This OEM LG part is also compatible with Sears/Kenmore.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fix a warm fridge or RF error code with this evaporator fan motor. Repairs grinding noises and restores proper cooling. 2-hour DIY install with video.