Chainsaw Pump

The chainsaw oil pump kit is designed to ensure that the chain stays oiled so that the teeth do not burn or grind quicker than they should. This guarantees the sharpest cut and the safest operation of the equipment. The components in this kit are made of durable plastic and metal, but they are small, and over time, they could become damaged, broken, or missing. If this is the case, replace them with this OEM oil pump kit. This repair can be completed in a short amount of time, and should only require a screwdriver, wrench, and pliers to complete the work. This kit is a genuine replacement for Poulan, Husqvarna, and Jonsered chainsaws and will provide an exact fit for compatible models. There are more than 150 models that can use this oil pump kit from Poulan, which includes everything needed for replacement. If your chainsaw doesn’t seem to be running at its best or if the automatic oiler isn’t working properly, this OEM pump kit could be the solution.

This part is a replacement oil pump. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective or broken oil pump in various chainsaws. This oil pump is necessary for lubricating the equipment's chain and bar. This is necessary for reducing friction and allowing the chain to glide smoothly around the bar. A chain needs to be well lubricated in order to efficiently cut through wood. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install the oil pump, the appropriate owner's manual and equipment diagrams should be referred to. This oil pump is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with chainsaws that have been manufactured by Husqvarna and Poulan.

Chainsaws may create a great deal of heat and friction, but the oil pump system prevents trouble. When using a chainsaw, it is necessary to use a specialty chainsaw bar oil. This is poured into a reservoir, and as the throttle is engaged, it cues a pump to distribute oil out of a port and on to the bar. From there the oil is distributed across the chain, which eliminates or greatly reduces friction and heat. The use of the oil pump is crucial, and this oil pump kit is a full replacement for times when a chainsaw is not getting adequate oil on the bar. This OEM replacement part includes the pump, housing, lines, and hardware necessary for installation. It works with a long list of brands, including Poulan. Craftsman, Husqvarna, and others. This project will require wrench and screwdriver sets to perform the repair. It ships as an individual kit ready for full replacement of the original oil pump.

This is a genuine OEM replacement oil pump assembly found in many chainsaws to lubricate the saw bar and chain. This lubrication keeps the chain moving freely around the saw. Without lubrication, the chain would drag and hesitate when cutting, creating a potentially dangerous situation. Smoke or an overheating chainsaw are good indicators that there may be a problem with lubrication. Check to see if the oil is reaching the chain by turning on the saw and pressing the throttle all the way down, then moving close to a piece of wood. As the blade gets close to the wood, oil spatter should be evident. If not, there is most likely a problem with the oil pump assembly.Allow the chainsaw to cool before attempting repairs. Wear gloves to protect hands from the blade. Remove the spark plug as an added safety precaution. Using the machine's manual diagram, remove the casing cover and find the oil pump assembly. Remove the oil lines leading to the oil pump before removing the pump. Remove the oil pump and install the new one. Reinstall the oil lines. Reinstall the spark plug. This is a heavy-duty metal part that is sold as an individual unit. It is compatible with chainsaws manufactured by Husqvarna, Poulan, and Craftsman.

Chainsaws generate a great deal of heat and friction, but the oil pump systems that keep the situation under control. They do this through the use of chainsaw bar oil poured into a reservoir. It remains in the reservoir until the throttle is engaged which then cues the pump to spray oil out of a port and smear it on the bar and chain to reduce friction and heat. The use of the oil pump is crucial, and this OEM oil pump assembly is a full replacement for times when a chainsaw is not getting adequate oil on the bar. It works with Poulan, Craftsman, Poulan Pro, and others. This project requires only wrench and screwdriver sets to perform the repair. It ships as an individual kit ready for full replacement of the original oil pump.

This is a plunger and gear assembly that provides lubricating oil to chainsaws. This part is compatible with over 125 chainsaws. Proper lubrication of the cutting chain is necessary for chainsaws as the rotation of the chain through the wood results in extreme heat and diminished ability to smoothly cut. Lubricating oil cools the chain and smooths the travel of the chain around the blade. Through continual use, the plunger and gear assembly will wear and cease to function. A sure sign of this occurs when the oil reservoir is full, but the chain is heating up and chewing rather than cutting wood. To replace the plunger and gear assembly, first, remove the chain and detach the bar. Then the clutch mechanism can be unscrewed, revealing the gear and plunger unit. Because contaminants can accrue in the reservoir and in the old assembly, it's best to discard any remaining oil safely and fill the reservoir with new oil. When replacing the gear and plunger assembly made by Jonsered, Husqvarna, and Poulan, it is best to use a genuine OEM replacement part such as this one, which is manufactured according to the specifications of the factory original.