Chainsaw Carburetor

This carburetor is a genuine MTD part, sold individually. This carburetor can be used as a replacement part in a chainsaw. The purpose of a carburetor in a chainsaw is to filter the mixture of air and fuel so that the two are combined in the proper ratio required to ignite the spark plugs and, in turn, power the appliance.If the engine is hard starting, demonstrating unusual noises such as clicking, crackling, or buzzing, or the engine will not start at all, it is likely that the carburetor has suffered some form of damage and will need to be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This carburetor is compatible with the following outdoor appliance brands: MTD and Craftsman.

The chainsaw carburetor mixes air and gas before this mixture makes its way to the engine. If this is not working correctly, the engine receives a less efficient gas supply or no gas supply at all. If your chainsaw has a full tank of gas but will not start or stops just after starting, the carburetor may need to be replaced. While carburetors can be cleaned to get them working again, they often need to be replaced if they have become too clogged. Depending on what you can reuse from your old carburetor, you may need to order new gaskets as well to ensure an airtight seal. A screwdriver, a nut driver, and a socket wrench set may be needed to complete this repair. This chainsaw carburetor is sold individually from other parts, but it does include the primer bulb. It is compatible with Craftsman and Poulan chainsaws. This chainsaw carburetor is a genuine OEM part.

Known as the primer bulb, this replacement part makes it easy for the engine to start. Responsible for circulating fuel through the carburetor, the purge bulb removes air out of the lines and allows the carb to have a new fuel charge before a start. The bulb may harden and crack over time, so it needs to be replaced to prevent an air leak. This is a genuine OEM part that works on different models of gas chainsaws from AYP, Craftsman, Poulan, and Husqvarna. This component is sold individually and comes with two screws.

This carburetor is designed to mix gas and oil together before moving the mixture into a chainsaw's engine. It is a single-cylinder model with an auto-choke system and requires regular maintenance to stay in good shape. Changing the oil, replacing the air filter, and adding a fuel stabilizer will help keep the engine performing at its best. If the carburetor isn't working properly, this may be due to blockages of debris, dirt, and fuel. If the fuel tank is full but the engine refuses to start, it's a good idea to test the carburetor for problems. Take out the air filter and then pour a small amount of fuel into the carburetor itself. Yank on the starter rope and see if the motor starts. It should die shortly after. If this occurs, the carburetor may have a problem and require replacement. This is an individual part that is compatible with Poulan, Craftsman, and Husqvarna chainsaws. The carburetor is a genuine OEM product that is provided directly from the manufacturer. It comes with a rubber O-ring and a gasket. A screwdriver will also be required to make a replacement.

The carburetor is responsible for mixing the air and fuel before it enters the engine. It consists of intake and outflow valves, as well as a float and needle to monitor and manage the flow of fuel and air coming into and leaving the carburetor body. The fuel mixes with oil in the smallest part of the body and is then pushed through a butterfly valve into the engine. Adjusting the valve will adjust how much of the fuel mixture gets into the engine. In the event that an engine is not running or keeps stalling, the carburetor may need of repair or replacement. This kit is designed to assist with the repair or refurbishment of several carburetors in various chainsaws. It is a full carburetor, not a rebuild kit. Installation will require a screwdriver to replace the carburetor. This OEM carburetor assembly kit is compatible with a number of chainsaws from Husqvarna. The kite includes the carburetor body, along with the float, needle, gaskets, and seals that are all made to manufacturer standards, offering an exact fit for compatible models.

The carburetor works by mixing clean oxygen with gasoline to create a combustible mixture of fuel that the engine can burn. Without this fuel, the engine cannot run efficiently or may not start at all. If the chainsaw engine won’t start or is running roughly, check the air filter first. If issues persist, the carburetor may be the culprit. Sometimes carburetors can be cleaned and rebuilt. Other times they will need a full replacement with a genuine OEM carburetor kit like this one. This kit includes the carburetor, grommet, and air filter housing. The carburetor kit fits several models of Poulan chainsaws. This carburetor kit is a genuine OEM product directly from the manufacturer and is sold individually.

The carburetor is the part of the chainsaw that mixes air from the intake valve system and gas before the fuel mixture goes to the engine. This ensures that the chainsaw is capable of continuing to run while it is in use. A bad carburetor will cause problems with how the chainsaw runs, and it may stop running during work. If the engine does not start when the tank is full of fresh fuel, test the carburetor. Start by removing the air filter and pouring a teaspoon of fuel onto the carburetor. Then, pull the starter rope to start the engine. If the engine starts but quickly dies, it means that the carburetor will likely need to be replaced. The replacement of the new carburetor is fairly simple. Remove the rear cover on the chainsaw to remove the old carburetor. Once you have removed the old carburetor, you can then install the new carburetor. Replace the cover and test the chainsaw. This is an OEM sourced part that will work with several models of chainsaws from Poulan and Craftsman.

This carburetor diaphragm is a genuine Husqvarna part, sold individually. This carburetor diaphragm can be used as a replacement part for a string trimmer, leaf blower, chainsaw, brush cutter, or leaf vacuum. The purpose of a carburetor diaphragm in one of these outdoor appliances is to combine air and fuel as part of the ignition process. The diaphragm controls the input of air and fuel throw a mechanism that pushes against a valve to open and shut, allowing the air and fuel in. The carburetor diaphragm might have to be replaced if the intake of fuel and air can no longer be controlled or the system is dysregulated. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This carburetor diaphragm is compatible with the following outdoor appliance brands: Husqvarna and Jonsered.

This part is a replacement choke lever. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken choke lever in line trimmers.The choke lever enables the choke plate to open or close within the carburetor, which helps to power on the engine. The engine may not start if this part is faulty, so if damaged, it should be replaced. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular choke lever, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality plastic. This choke lever can be used with a variety of line trimmer models manufactured by Husqvarna, Poulan, and other brands.

This replacement part is a carburetor assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This carburetor assembly is found in appliances that contain and engine. The carburetor is responsible for supplying the internal engine with the air and fuel mixture. This part is able to regulate the air flow in the specific compartments and allows the engine to run smoothly and effectively.A new carburetor assembly might be needed if the current carburetor is malfunctioning or not working at all. The user might be able to tell if the part needs replacing if there are noises coming from inside the engine. This might reveal that the carburetor is not connected correctly or is damaged. Be sure the device is completely shut down prior to starting a repair as the engine can be dangerous if it is powered on.This part is sold individually and is compatible with lawn equipment made by MTD. Note that this part is a genuine OEM replacement part.

This replacement part is a primer bulb. This is a genuine replacement part made by MTD. This part is typically found in chainsaws and helps to fill the carburetor with the correct amount of fuel so that the engine may run properly during use. A new primer bulb might be needed if the current one is damaged or missing. This can be caused by normal wear and tear or a single incident that may have caused damage to this part. If the bulb is no longer working as usual, it might be time to replace this part. Wear work gloves when replacing parts on chainsaws as the blades are sharp and can cause injury. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.