Chipper Shredder Dipstick

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.

Log Splitters use this plug pipe to cover the oil tube and measure the amount of oil in the engine with the included dipstick. The dipstick sits inside the oil tube, and when it is pulled out, the amount of oil is determined by the markings on the dipstick. If the plug pipe is lost or misplaced while replacing the oil or making repairs to the engine, it will need to be replaced to prevent oil from leaking and to keep the pressure inside the oil tube optimal. Maintaining the correct oil level in all engines is critical to keeping the engine running. If the engine runs without oil, major damage can be done to the pistons and other parts, making the engine seized and have to be replaced. It is less expensive to maintain the oil than it is to replace the engine. This plug pipe with dipstick is an OEM replacement part that is sourced directly from the manufacturer. It is a gold-colored metal part with an attached dipstick. It is sold as an individual unit that is designed to be used on log splitters manufactured by MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Yard Machines.

This replacement part is an oil filler tube is intended for use in different types of lawn equipment. It is a genuine replacement part made by MTD. This tube allows the user to easily fill the tank with oil without having to worry about spills.A new oil filler tube might be needed if the current one is missing or damaged. It is possible that the tube can become damaged after years of normal wear and tear. If this is the case the user should plan to replace it immediately so that the tank is able to be refilled. Be sure to wear work gloves when replacing this part as there might still be oil in the tube. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This is an oil dipstick assembly that is a crucial part of many types of lawn and garden equipment. The dipstick is made of quality plastic and metal and is located inside the oil fill tube. The purpose of the part is to indicate how much oil is currently in the engine. Regular use can cause this component to wear out or become damaged over time. When this occurs, it's not possible to determine how much oil is present so the oil dipstick assembly will need to be replaced.Replacing the oil dipstick assembly is a simple and quick process. No tools are needed to make the replacement. Turn off the equipment and access the oil fill tube. Unscrew and remove the old oil dipstick tube before replacing it with the new component. The equipment can then be used as normal.This oil dipstick assembly is a genuine OEM replacement part that is directly sourced from the manufacturer. The part is sold on an individual basis. This component is made for use with lawnmowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers created by MasterCut, Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This oil fill tube assembly is a genuine MTD part, sold individually. This oil fill tube assembly can be used as a replacement part in lawn mowers, tillers, leaf blowers, and wood chippers. The purpose of the oil fill tube assembly in a small engine outdoor appliance is to allow the operator of the appliance to channel oil into the appliance so that the oil can be used to ignite the spark plugs and power on the engine for standard use of the appliance.This oil fill tube assembly might have to be ordered as a complete replacement part in an oil filler tube assembly that has been sufficiently damaged as to permanently affect its typical functionality for the appliance. If the oil fill tube assembly has been punctured, dented, torn, ripped, scraped, cracked, or eroded to the point of no efficacy, the oil fill tube assembly should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil fill tube assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Huskee, Yard Man, and MasterCut.

This filler tube is designed for use on lawnmowers as a part of the oil system. The tube sits inside of the crankcase and has a rubber seal to prevent any leaking between the two components. It allows people to test the oil level using a dipstick. It is made of durable plastic but may experience damage or breakage over time. If the filler tube for a lawnmower is broken or cracked, leaking can occur. Taking a look at the tube will give an indication of whether the part is in good shape. If there is any issue with the tube, it needs to be replaced. The filler tube attaches to the lawnmower using a screw so a screwdriver is needed for the repair. Simply unscrew the old filler tube and place the replacement component in its place. Put the screw back in and tighten it before using the lawnmower. This filler tube is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual part. The tube is compatible with lawnmowers from Craftsman, Lawn-Boy, Toro, and Tecumseh. It comes with gaskets to fit several different types of lawnmowers.

This part is an oil filler tube. The oil filler tube is what directs replacement oil into the engine when oil is being replaced or added to the engine. This allows the user to easily fill the engine with oil. A new oil filler tube may be needed if there is any sign of wear or damage to the part. If there are any leaks when refilling the engine with oil, then the oil filler tube should be replaced.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This oil filler tube is compatible with chippers, shredders, edgers, engines, pressure washers, vacuums manufactured by Tecumseh, Husqvarna, Toro, Lawn-Boy, Cub Cadet, and MTD.

A dipstick is a part that is used to measure the amount of oil in various yard and garden equipment. It allows a person to reach an otherwise inaccessible space by inserting and then removing the dipstick. At that point, checking how much of the dipstick is covered in oil will let a person know whether it needs to be topped off. Over time, these tools can rust, break, or crack and will need to be replaced.Take a look at the dipstick for any damage before making a replacement of the part. If it needs to be replaced, it should be done while the lawnmower or other tool is cooled down. Unscrew the broken or damaged dipstick and take it out of the oil tank. Simply insert the new dipstick and screw it on before checking the oil level and using the machine again.This dipstick is a replacement part for Tecumseh, Cub Cadet, Toro, Briggs & Stratton, Troy-Bilt, Lawn-Boy, and Craftsman lawnmowers, wood chippers, and pressure washers. It comes as an individual component. It is a genuine OEM product that is sourced directly from the manufacturer.

This oil dipstick is designed to fit a number of engines that power lawn and landscaping equipment, including tillers, lawn mowers, snowblowers, leaf blowers, generators, and chippers. The dipstick sits prominently toward the front of the engine and has a yellow cap that cannot be mistaken for the gas cap, which is usually black. As prominent as it is, the dipstick is all too often disregarded despite being one of the most important parts of any small engine. The dipstick provides information about the oil in the engine's crankcase in two ways. First, it reveals the level of oil in the crankcase. If there is too little oil, the user runs the risk of the engine overheating and being ruined. If the oil is so black or dark brown, the stick marking cannot be seen, and it should be changed. Because of their design, dipsticks are occasionally bent off the stick to come apart from the cap. In either case, the stick should be replaced. This OEM dipstick is certified to be a perfect replica for the part that came with the small engine. This dipstick is compatible with a number of small engines, including Briggs & Stratton, Craftsman, Wheel Horse, Cub Cadet, Tecumseh, Exmark, Toro, Lawn-Boy, Simplicity, Jenn Air, MTD, Maytag, and MasterCut.