Chipper Shredder Bracket & Flange

Genuine Mtd part

Adjustable Gib

By: Mtd

Part Number: 781-0351

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

$19.70

Compare At:: $23.44
You Save:: $3.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Mtd part

Front Spring Lever

By: Mtd

Part Number: 732-1026

This is a replacement front lever spring. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective front lever spring on a variety of outdoor power equipment models. This part helps to adjust the height of the equipment deck to allow it to reach the optimal cutting height for different types of terrain. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is required to install this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this front lever spring, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this front lever spring is suitable for use on several different lawnmower models, log splitters, and chippers manufactured by MTD, Craftsman, Yard Man, Cub Cadet, Husky, Yard Machines, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

$6.95

Compare At:: $8.20
You Save:: $1.25

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Mtd part

Plate-Insulator

By: Mtd

Part Number: 726-0279

$4.95

Compare At:: $5.94
You Save:: $0.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Mtd part

Wedge Assembly

By: Mtd

Part Number: 719-0550A

This is a wedge assembly that is made for use with log splitters. The component is located on the hydraulic cylinder of the splitter. This part presses into a log so the piece can be split quickly and easily. Over time and with use, the wedge assembly may become damaged or break. When this occurs, the log splitter may not operate correctly and the part will need to be replaced.When replacing the wedge assembly, a hammer, adjustable wrench, and socket set may be needed. A pair of work gloves will also be useful. First, turn off the log splitter and place it on a stable surface. Make sure the spark plug wire is disconnected. Remove the bolts holding the old wedge assembly in place and remove it from the tool. Replace this part with a new OEM component and reassemble.The wedge assembly is a genuine replacement part that is sourced directly from the manufacturer. It is sold as an individual part. This component is made to be compatible with log splitters created by Craftsman, MTD, Troy-Bilt, and Yard Machines.

$256.95

Compare At:: $305.77
You Save:: $48.82

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Mtd part

Pivot Bar

By: Mtd

Part Number: 753-0642-0637

This pivot bar is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, and chipper shredders. The pivot bar provides a means of steering the outdoor appliance.A pivot bar might have to be replaced if it suffers damage over time. Although there is not often a need to replace a pivot bar, as it holds up well to general usage and exposure to the elements, a pivot bar might have to be replaced if there is a collision or a traumatic impact as a result of a drop from significant height or onto a particularly hard surface. Additionally, a pivot bar might have to be replaced if there is deterioration in the spindle bushing, thereby exposing the pivot bar to potential damage. If this occurs, a replacement pivot bar part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This pivot bar is compatible with the following brands: MTD, Yard Man, Bolens, and Yard Machines.

$146.59

Compare At:: $175.91
You Save:: $29.32

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Mtd part

Adjuster Kit

By: Mtd

Part Number: 753-06761

This replacement part is an adjuster kit. It is a genuine replacement part made by MTD. This adjuster kit is typically found in lawnmowers and is responsible for assisting the user in changing the height of the blades so that the user may determine the setting which the grass is cut at. A new adjuster kit might be needed if the user is unable to adjust the height of the blades and therefore cannot perform the necessary duties. If the blades are stuck at one height it is possible that the adjuster kit is to blame. Because this part is located close to dangerous objects it is recommended that work gloves be worn for protection. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. Note that part is sold individually and is sourced directly from the manufacturer.

$75.25

Compare At:: $89.55
You Save:: $14.30

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Mtd part

Fuel Tank Bottom Bracket

By: Mtd

Part Number: 951-11616

This fuel tank bottom bracket is a genuine MTD part, sold individually. This fuel tank bottom bracket can be used as a replacement part for small engine outdoor appliances including lawn mowers, leaf blowers, and wood chippers. The purpose of a fuel tank bottom bracket is to stabilize the placement of the fuel tank.If the fuel tank bottom bracket is compromised to the point that it can no longer bolster the placement of the fuel tank, the fuel tank bottom bracket should be removed and replaced by this genuine OEM replacement part, in accordance with the relevant instructions from an appliance manual.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuel tank bottom bracket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Huskee, Yard Man, and MasterCut.

$12.95